Engineering, Automotive.

Simulation and optimization of a fuel cell hybrid vehicle. by: (Language materials, printed)

Design and performance analysis of electric vehicles fed by multiple fuel cells. by: (Language materials, printed)

Prediction of the effects of lower-extremity muscle forces on knee, thigh, and hip injuries in frontal motor vehicle crashes. by: (Electronic resources)

Are today's automotive technician students ready for the increased use of ethanol fuels: A study of students' perceptions of ethanol and the effects of E20. by: (Electronic resources)

Nonsmooth dynamics of disc brake systems and aeroelastic panels. by: (Electronic resources)

Methodology for design and analysis of reconfigurable/reusable automotive assembly systems. by: (Electronic resources)

Structure-property quantification and modeling related to crashworthiness. by: (Electronic resources)

An analysis of risk perception and the RPN index within Failure Modes and Effects Analysis. by: (Electronic resources)

Investment evaluation of automotive body assembly system alternative. by: (Language materials, printed)

Front-end converter design and system integration techniques in distributed power systems. by: (Language materials, printed)

Linear parameter varying representations for nonlinear control design. by: (Language materials, printed)

A nonlinear observer for instantaneous internal combustion engine crankshaft torque and active torque smoothing control using a crankshaft-mounted electric motor. by: (Language materials, printed)

A nonlinear state-variable model of a spark ignition engine for exhaust emission control studies. by: (Language materials, printed)

Modeling and identification of the combustion pressure process in internal combustion engines. by: (Language materials, printed)

Powertrain modeling and engine torque estimation using nonlinear observers. by: (Language materials, printed)

Synchronous, simultaneous optimization of ignition timing and equivalence ratio in a gas-fueled spark-ignition engine. by: (Language materials, printed)

Identification and characterization of complex dynamic structure in spark ignition engines. by: (Language materials, printed)

Modeling and analysis of chemiluminescence sensing for syngas, methane and Jet-A combustion. by: (Language materials, printed)

On network-based control and sensitivity characterization of mobile robot in IntelligentSpace. by: (Electronic resources)

Impact of operational testing and interior trim manufacturing on head injury criterion. by: (Electronic resources)

Liquid nitrogen propulsion systems for automotive applications: Calculation of the mechanical efficiency of a dual, double-acting piston propulsion system. by: (Electronic resources)

An analysis of vehicle fires and potential methods to reduce their severity through more stringent material standards. by: (Electronic resources)

Optimal fault-detection filter design for steer-by-wire vehicles. by: (Electronic resources)

Performance and aging of batteries for vehicle applications. by: (Electronic resources)

A study of renewable energy internal combustion engine system using TRNSYS. by: (Electronic resources)

Experimental evaluation of vehicle cabin noise from suspension induced vibrations using transfer path and psychoacoustic analysis techniques. by: (Electronic resources)

An experimental characterization of a high degree of freedom spark-ignition engine to achieve optimized ignition timing control. by: (Electronic resources)

Design of a free-piston Stirling engine-pump. by: (Electronic resources)

Water transport management of a proton exchange membrane fuel cell. by: (Electronic resources)

Laser Doppler vibrometer for efficient structural health monitoring. by: (Electronic resources)

Muscular response to tensile loading of the cervical facet joint capsule: A potential whiplash pain mechanism. by: (Electronic resources)

Investigation of a semi-active muffler system with implementation on a snowmobile. by: (Electronic resources)

Analysis of frontal airbag non-deployment related fatalities and severe injuries. by: (Electronic resources)

A plan for success: Constructing a set of manufacturing performance measuring tools for United States automotive gasoline engine manufacturers. by: (Language materials, printed)

Statistical analyses of traffic advisory systems on driving behavior. by: (Language materials, printed)

Human factors in the field: A field study of accident investigation at the Transportation Safety Board of Canada. by: (Language materials, printed)

Hierarchical model-based fault diagnosis with application to vehicle systems. by: (Language materials, printed)

Simulation and optimization of a crossdocking operation in a just-in-time environment. by: (Language materials, printed)

Robust nonlinear control design via convex optimization and its application to fault tolerant longitudinal control of vehicles. by: (Language materials, printed)

A study of the effects of exciting the intake flow in an internal combustion engine model. by: (Language materials, printed)

A system's model for a spark-ignited internal combustion engine. by: (Language materials, printed)

Modelling and control of automotive coldstart hydrocarbon emissions. by: (Language materials, printed)

A dynamic model for automotive diesel engines. by: (Language materials, printed)

Air-fuel ratio control in an IC engine using an event-based observer. by: (Language materials, printed)

System identification and air-fuel ratio control of a spark ignition engine. by: (Language materials, printed)

Model-based air-fuel ratio control of a multicylinder leanburn engine. by: (Language materials, printed)

An experimental and computational study of internal combustion engine modeling for controls oriented research. by: (Language materials, printed)

A nonlinear model to analyze the behaviors of the idle speed and the liquid fuel film in gasoline engines. by: (Language materials, printed)

UTFES: A computer code to model engine performance, knock, and hydrocarbon emissions. by: (Language materials, printed)

Air fuel ratio control of spark-ignition engines using sliding modes. by: (Language materials, printed)

Automotive engine model linearization. by: (Language materials, printed)

Vehicle mathematical models and speed control in a vehicle platoon. by: (Language materials, printed)

Model-based turbocharged diesel engine control and diagnostics using nonlinear sliding control and observers. by: (Language materials, printed)

A simplified engine air control system. by: (Language materials, printed)

Nonlinear dynamic engine modeling and model-based engine diagnostics. by: (Language materials, printed)

An investigation of traction motor characteristics for electric and hybrid electric vehicle application. by: (Language materials, printed)

Enhancement of vehicle handling dynamics model using global searching algorithm and estimation theory. by: (Language materials, printed)

System identification for transit buses using a hybrid genetic algorithm. by: (Language materials, printed)

Reduction of spark-ignition engine hydrocarbon emissions and the associated local ozone production through variable exhaust-valve timing. by: (Language materials, printed)

Artificial neural network approaches to develop robust dimensional data analysis in automative assembly process. by: (Language materials, printed)

Portable automated driver for universal road vehicle dynamics testing. by: (Language materials, printed)

Automotive light assembly failure detection. by: (Language materials, printed)

Anonymous, secure and efficient vehicular communications. by: (Language materials, printed)

Detecting and predicting the onset of cavitation in automotive torque converters. by: (Language materials, printed)

The effect of in-vehicle warning systems on driver response in work zones. by: (Language materials, printed)

Naturalistic stopping: Exploring the stopping behavior of drivers at intersections. by: (Language materials, printed)

Design for NVH: A roadmap for robust NVH design and development. by: (Language materials, printed)

Commercializing light-duty plug-in/plug-out hydrogen-fuel-cell vehicles: "Mobile electricity" technologies, early California household markets, and innovation management. by: (Language materials, printed)

Fuzzy logic-based automotive airbag control system. by: (Language materials, printed)

Advanced vehicle control of heavy vehicles for automated highway systems. by: (Language materials, printed)

NO(x) abatement by trapping/catalytic reduction and theoretical/experimental studies on new sorbents. by: (Language materials, printed)

Motorcycle rider posture prediction: The prediction of spinal curvature as a function of anthropometrics and point-of-contact chassis design. by: (Language materials, printed)

Combustion analysis and particulate mutagenicity characterization for a single-cylinder diesel engine fueled by Fischer-Tropsch derived liquids. by: (Language materials, printed)

Internal combustion engine cooling strategies: Theory and test . by: (Language materials, printed)

System level modeling and component level control of fuel cells. by: (Language materials, printed)

Nonlinear dynamics of controlled slipping clutches. by: (Language materials, printed)

Nonlinear control strategies for advanced vehicle thermal management systems. by: (Language materials, printed)

Investigation of homogeneous charge compression ignition (HCCI) engines fuelled with ethanol blends using experiments and numerical simulations. by: (Language materials, printed)

Modeling and analysis of the EDS Maglev system with the Halbach magnet array. by: (Language materials, printed)

A model-based methodology for product family design. by: (Language materials, printed)

Application of optimization procedures using phantom connectivity technique. by: (Language materials, printed)

Gyroscope and micromirror design using vertical-axis CMOS-MEMS actuation and sensing. by: (Language materials, printed)

Dynamic modelling of household automobile transactions within a microsimulation framework. by: (Language materials, printed)

Vehicular emissions and fuel consumption at urban traffic signal controlled junctions. by: (Language materials, printed)

Efficiencies of hydrogen storage systems onboard fuel cell vehicles. by: (Language materials, printed)

Stirling engine-powered hybrid electric vehicles: A simulation approach. by: (Language materials, printed)

Cooperative vehicle position estimation. by: (Language materials, printed)

Measurement, modeling, and OFDM synchronization for the wideband mobile-to-mobile channel. by: (Language materials, printed)

Experimental and numerical study of the adsorption process in a carbon canister. by: (Language materials, printed)

Development and characterization of coal utilization byproducts based automotive brake lining composite materials. by: (Language materials, printed)

Physics of zero-gap laser welding of zinc-coated steel and application in automobile body manufacturing. by: (Language materials, printed)

Investigation of clean diesel combustion with oxygenated fuels in a constant-volume combustion chamber using forward illumination light extinction technique. by: (Language materials, printed)

Life cycle models of conventional and alternative-fueled automobiles. by: (Language materials, printed)

The rise of electric two-wheelers in China: Factors for their success and implications for the future. by: (Language materials, printed)

Hybrid electric vehicle regenerative-braking using ultracapacitors. by: (書目-語言資料,印刷品)

Torque control strategies for AWD electric vehicles. by: (書目-語言資料,印刷品)

Haptics in robotics and automotive systems. by: (書目-語言資料,印刷品)

Motion coordination and performance analysis of multiple vehicle systems. by: (書目-語言資料,印刷品)

Using large eddy simulations to study diesel DI-HCCI engine flow structure, mixing and combustion. by: (書目-語言資料,印刷品)

Modeling, configuration and control optimization of power-split hybrid vehicles. by: (書目-語言資料,印刷品)

Modelling and experimental study of automotive air-conditioning systems with consideration of two-component two-phase flow. by: (書目-語言資料,印刷品)

Ab-initio modeling of electrochemistry in proton-exchange-membrane fuel cells. by: (書目-語言資料,印刷品)

Flexible mixed-effect modeling of functional data, with applications to process monitoring. by: (書目-語言資料,印刷品)

Vehicle structural design strategies for enhanced safety in side impact collisions. by: (書目-語言資料,印刷品)

Development of system analysis methodologies and tools for modeling and optimizing vehicle system efficiency. by: (書目-語言資料,印刷品)

Modeling and control methods for improving drivability, power management and fuel economy in a hybrid electric vehicle. by: (書目-語言資料,印刷品)

Transformation plans for optimizing military vehicle testing . by: (書目-語言資料,印刷品)

Simultaneous plant/controller optimization of traction control for electric vehicle. by: (書目-語言資料,印刷品)

Overlay token ring protocol for vehicular communication networks. by: (書目-語言資料,印刷品)

A design optimization methodology for the front suspension of the 2007 Cooper Union mini Baja SAE vehicle. by: (書目-語言資料,印刷品)

The effect of driving conditions and ambient temperature on particulate matter emission rates and size distributions from light duty gasoline-electric hybrid vehicles. by: (書目-語言資料,印刷品)

An electronic equalizer for series connected batteries. by: (書目-語言資料,印刷品)

Blank welding high-strength steels. by: (書目-語言資料,印刷品)

Fracture of plastically-deformed, adhesively-bonded structures: Experimental and numerical studies. by: (書目-語言資料,印刷品)

Why technology development fails: Bringing technology from concept to implementation. by: (書目-語言資料,印刷品)

Extending the performance of net shape molded fiber reinforced polymer composite valves for use in internal combustion engines. by: (書目-語言資料,印刷品)

An aerodynamic approach to improve visibility during high speed snow plowing. by: (書目-語言資料,印刷品)

Trends of vehicular emissions for Clean Air Associates precombustion retrofit device. by: (書目-語言資料,印刷品)

Strategies de controle actif du bruit de roulement sur les automobiles. by: (書目-語言資料,印刷品)

High-bandwidth unsteady microactuators for active control of high-speed flows. by: (書目-語言資料,印刷品)

Electrostatic precipitators to lower carbon monoxide automobile emissions. by: (書目-語言資料,印刷品)

Small engine emissions testing laboratory development and emissions sampling system verification. by: (書目-語言資料,印刷品)

The effects of behavioral, geometric and heavy vehicle traffic flow characteristics on capacity and emissions at roundabouts. by: (書目-語言資料,印刷品)

PV assisted electric vehicle. by: (書目-語言資料,印刷品)

Understanding customization: A case study in car customization. by: (書目-電子資源)

Optimal design of multistation assembly systems. by: (書目-電子資源)

Dynamic friction characterization of tripod constant velocity (CV) joints: Experiments, analysis and modeling. by: (書目-電子資源)

Conversion and performance evaluation of a hydrogen powered Ford F-250 pickup truck. by: (書目-語言資料,印刷品)

Transient performance of steam reformers in the context of automotive fuel cell system integration. by: (書目-語言資料,印刷品)

Parametric computational study of operating conditions on proton exchange membrane (PEM) fuel cells. by: (書目-電子資源)

Development of automobile antenna design and optimization for FM/GPS/SDARS applications. by: (書目-電子資源)

Development of a low-cost navigation system for autonomous off-road vehicles. by: (書目-電子資源)

Design and optimization of fuel cell/battery/supercapacitor hybrid power sources for electric vehicles. by: (書目-電子資源)

Characterization of the composition and toxicity of particulate matter emissions from advanced heavy-duty natural gas engines. by: (書目-語言資料,印刷品)

Hydroforming of tubular materials at various temperatures. by: (書目-電子資源)

Analysis and control of an in situ hydrogen generation and fuel cell power system for automotive applications. by: (書目-電子資源)

Modeling techniques for vibration isolation in motorcycles. by: (書目-電子資源)

Thermal modeling of the proton exchange membrane fuel cell. by: (書目-電子資源)

Finite element modeling of the human pelvis: Applications to automobile side impact and periacetabular lesions. by: (書目-電子資源)

Finite element concept modeling of methodologies and software implementation for vehicle assemblies comprised of beam-like structural members. by: (書目-電子資源)

Engineering design synthesis of sensor and control systems for intelligent vehicles. by: (書目-電子資源)

Intelligent MEMS INS/GPS integration for land vehicle navigation . by: (書目-電子資源)

Development of a precise GPS/INS/on-board vehicle sensors integrated vehicular positioning system. by: (書目-語言資料,印刷品)

Filtering and fault tolerant control of parameter-varying time-delay systems and applications. by: (書目-語言資料,印刷品)

Vehicle control utilizing an improved model of tire contact patch kinematics. by: (書目-語言資料,印刷品)

Advanced thermal management for internal combustion engines . by: (書目-語言資料,印刷品)

Coordinated and reconfigurable vehicle dynamics control. by: (書目-語言資料,印刷品)

Low-temperature combustion in a small-bore high-speed direct injection optically accessible diesel engine. by: (書目-語言資料,印刷品)

Optimal approach for autonomous parallel parking of nonholonomic car-like vehicle. by: (書目-語言資料,印刷品)

Development and validation of a control strategy for a parallel hybrid (diesel-electric) powertrain. by: (書目-語言資料,印刷品)

Cervical muscle activity and range of motion during driving. by: (書目-語言資料,印刷品)

Stereolithography of ceramics. by: (書目-語言資料,印刷品)

An intelligent load shedding relay with advanced knowledge base technology for power system protection. by: (書目-語言資料,印刷品)

Handwheel force feedback with lanekeeping assistance: Combined dynamics, stability and bounding. by: (書目-語言資料,印刷品)

A two conserved scalar model for HCCI and PPCI engine applications. by: (書目-語言資料,印刷品)

Flow characterization of centrifugal blower systems and development of new design features to improve its performance. by: (書目-語言資料,印刷品)

A multifunctional silicon micromachining technology for high performance microsensors and microactuators. by: (書目-語言資料,印刷品)

Fatal crash trends and analysis in southeastern states. by: (書目-語言資料,印刷品)

Thermoelastic contact problems in automotive brakes and clutches. by: (書目-語言資料,印刷品)

An electric vehicle battery charging system. by: (書目-語言資料,印刷品)

A novel ZVS bi-directional Cuk converter with H-infinity average-current control for dual voltage systems in automobiles. by: (書目-語言資料,印刷品)

Impact of system-level factors on planetary gear set behavior. by: (書目-語言資料,印刷品)

Prediction of variation in dimensional tolerance due to sheet metal hydroforming using finite element analysis. by: (書目-語言資料,印刷品)

Incorporating drivability metrics into optimal energy management strategies for hybrid vehicles. by: (書目-語言資料,印刷品)

The application of support vectors machine (SVM) for traffic condition assessment using intelligent transportation system data. by: (書目-語言資料,印刷品)

Modeling and control of an automotive fuel cell thermal system. by: (書目-語言資料,印刷品)

Real time control of an adaptive vehicular occupant restraint system using intelligent control techniques. by: (書目-語言資料,印刷品)

GA-based real-time adaptive fuzzy control of semi-active automotive suspensions. by: (書目-語言資料,印刷品)

Estimation and control of robotic radiation-based processes. by: (書目-語言資料,印刷品)

Design of a stand-alone control strategy for retrofit hybrid electric vehicles. by: (書目-語言資料,印刷品)

Automated design and optimization of VHF/UHF automotive conformal antennas. by: (書目-電子資源)

A potential field framework for active vehicle lanekeeping assistance. by: (書目-電子資源)

Enhancing robust design with aid of TRIZ and Axiomatic Design. by: (書目-電子資源)

Design and performance analysis of fault tolerant TTCAN systems. by: (書目-電子資源)

Examination of high-speed helical gear mesh efficiency and influences. by: (書目-電子資源)

Constrained optimal control applied to fuel cells and vehicle systems. by: (書目-電子資源)

Inventory simulation and optimization using system dynamics, structural modeling equations and genetic algorithms in the drivetrain division of an automotive manufacturer. by: (書目-電子資源)

An advanced shell theory based tire model. by: (書目-電子資源)

Design and simulation of face-hobbed hypoid gears, and tooth contact analysis by boundary element method. by: (書目-電子資源)

Vehicle front rail impact trigger: A new conceptual design, manufacturing and impact performance through FEA simulation. by: (書目-電子資源)

A study of solidification with a rotating magnetic field. by: (書目-電子資源)

Generalized criteria for localized necking in sheet metal forming. by: (書目-電子資源)

State and parameter estimation for vehicle dynamics control using GPS. by: (書目-電子資源)

Steer-by-wire: Implications for vehicle handling and safety. by: (書目-電子資源)

A fiber-optic weigh-in-motion system based on fiber Bragg grating technologies. by: (書目-電子資源)

Simultaneous reduction of nitric oxide and particulate matter emissions from a light-duty diesel engine using combustion development and diesel oxidation catalyst. by: (書目-電子資源)

Perception and action in virtual environments: Human performance in virtual driving simulators. by: (書目-電子資源)

A dynamic computer simulation model for automobile passenger compartment climate control and evaluation. by: (書目-電子資源)

Effect of head-neck position on cervical facet stretch of post mortem human subjects during low speed rear end impacts. by: (書目-電子資源)

Suppression of friction-induced oscillations through use of high-frequency dither signals. by: (書目-電子資源)

Modeling, control, and diagnosis of a diesel lean nitrogen oxide trap catalyst. by: (書目-電子資源)

Data driven system level modeling for diesel engines. by: (書目-電子資源)

A study of sulfur dioxide poisoning on ceria based three way catalysts. by: (書目-電子資源)

Strain rate response of nano enhanced woven fabric composite beams. by: (書目-電子資源)

A study of alternative diesel fuel lubricity, deposit formation, and material compatibility: Dimethyl ether, biodiesel and ultra low sulfur diesel fuels. by: (書目-電子資源)

Development of models to study the emissions, flow, and kinetic characteristics from diesel oxidation catalysts and particulate filters. by: (書目-電子資源)

TRIZ theory and automotive safety systems development. by: (書目-電子資源)

Dynamic estimation of oncoming vehicle range and range rate: An assessment of the human visual system's capabilities and performance. by: (書目-電子資源)

Vehicle emissions testing: Failure probabilities, repair incentives, and policy assessment. by: (書目-電子資源)

Evaluation of heavy-duty diesel vehicle emissions during cold-start and steady-state idling conditions and reduction of emissions from a truck-stop electrification program. by: (書目-電子資源)

Dynamic modeling and simulation of snow removal operation in an intelligent transportation system environment. by: (書目-電子資源)

Effects of heavy-duty diesel vehicle idling emissions on ambient air quality at a truck travel center and air quality benefits associated with advanced truck stop electrification technology. by: (書目-電子資源)

An experimental investigation of the aerodynamic shroud with an off-highway engine cooling fan. by: (書目-電子資源)

A rapid method for identifying and characterizing structural impacts using distributed sensors: An application for automotive pedestrian protection. by: (書目-電子資源)

Crash energy absorption of braided composite tubes. by: (書目-電子資源)

Precipitation and strengthening in aluminum-germanium-silicon alloys. by: (書目-電子資源)

Feasibility of cold roll forming of external involute-helical gears for automatic transmission. by: (書目-電子資源)

Impacts of signal synchronization on vehicular emissions: An on-board measurement case study. by: (書目-電子資源)

Sandwich panels with functionally graded core. by: (書目-電子資源)

Effects of model-based simulation and quality function deployment on the paint finishing system of the automotive industry. by: (書目-電子資源)

Modelling and design optimization of low speed fuel cell hybrid electric vehicles. by: (書目-電子資源)

Development of a fuel cell hybrid low-speed electric vehicle testing facility. by: (書目-電子資源)

Using high-fidelity simulations and artificial neural networks in calibration and control of high-degree-of-freedom internal combustion engines. by: (書目-電子資源)

A solver for inconsistent continuous satisfaction problems: An application to automobile shock-quality testing. by: (書目-電子資源)

Implementation of manifold bridge tuning for noise control of an automotive intake system. by: (書目-電子資源)

Methods of fault detection in stochastic delay-differential linear systems. by: (書目-電子資源)

An optimization approach to the design of a Formula-style racecar through artificial neural network surrogate models. by: (書目-電子資源)

Trends of vehicular emissions due to the effect of Ethos(R) FR as a fuel additive. by: (書目-電子資源)

Modeling, testing, and analysis of on-center handling for sport utility vehicles. by: (書目-電子資源)

Solenoid operated variable valve timing for internal combustion engines. by: (書目-電子資源)

Development of GPS-based procedure for tracking vehicle path. by: (書目-電子資源)

Optimal control for electrical power-assisted steering system. by: (書目-電子資源)

Vehicle handling, stability, and bifurcation analysis for nonlinear vehicle models. by: (書目-電子資源)

Development of an electronic sensor for engine exhaust particulate measurements. by: (書目-電子資源)

An energy model to determine the fuel consumption of a hybrid electric hydrogen fuel cell bus. by: (書目-電子資源)

Speed-sensorless torque control of induction motors for hybrid electric vehicles. by: (書目-電子資源)

Processing three-dimensional laser scanner data for automotive styling design. by: (書目-電子資源)

Centrifugal fans: Similarity, scaling laws, and fan performance. by: (書目-電子資源)

Estimating infant head injury tolerance and impact response. by: (書目-電子資源)

Biomechanics of hip injuries in frontal motor-vehicle crashes. by: (書目-電子資源)

Dynamic resistance based intelligent resistance welding. by: (書目-電子資源)

Dimensional variation modeling and analysis for multi-station compliant assemblies at a preliminary design stage. by: (書目-電子資源)

Fiber optic sensing technology for measuring in-cylinder pressure in automotive engines. by: (書目-電子資源)

Safe and stable narrow commuter vehicles. by: (書目-電子資源)

An efficient eigensolution method and its implementation for large structural systems. by: (書目-電子資源)

Modeling and control of homogeneous charge compression ignition engines with high dilution. by: (書目-電子資源)

Techniques for hybrid electric vehicle controller synthesis. by: (書目-電子資源)

Sound quality of diesel engines. by: (書目-電子資源)

Experimental study on tensile plasticity of light metal engineering alloys for automotive application. by: (書目-電子資源)

Automotive collision detection system utilizing distributed polyvinylidene fluoride sensors. by: (書目-電子資源)

Six Sigma methodology in automobile industry. by: (書目-電子資源)

Tribological failure analyses of automotive engine blocks subjected to sliding wear damage. by: (書目-電子資源)

Plasma electrolytic oxidation process for corrosion protection of two aluminium alloys used in automotive applications. by: (書目-電子資源)

Investigations into the causes and methods of reducing airflow induced buffeting over vehicle rear windows. by: (書目-電子資源)

Fuzzy logic control of a fuel cell/ultracapacitor hybrid vehicular power system. by: (書目-電子資源)

Transportation design. by: (書目-電子資源)

Segmentation, classification, and tracking of humans for smart airbag applications. by: (書目-電子資源)

Visual sampling of in-vehicle displays while driving: Empirical findings and a queueing network cognitive model. by: (書目-電子資源)

Cohesive zone modeling of structural joint failure. by: (書目-電子資源)

In-situ processing of aluminum nitride particle reinforced aluminum alloy composites. by: (書目-電子資源)

Cooperative control of two-manipulator systems handling flexible objects. by: (書目-語言資料,印刷品)

Design for manufacturing systems from automotive industry perspective. by: (書目-語言資料,印刷品)

Non-contact spatially constrained optical scanning methods applied for depth, width and gap measurements. by: (書目-語言資料,印刷品)

Combustion modeling for gasoline direct injection engines using KIVA-3V. by: (書目-電子資源)

Design and performance of a robust GPS/INS attitude system for automobile applications. by: (書目-電子資源)

An Integrated Approach to Identify Thoracic Injuries in Rollover Crashes. by: (書目-語言資料,印刷品)

Implications of temporally and geographically realized energy use for electrified transportation. by: (書目-語言資料,印刷品)

An Epidemiological Approach to Emergency Vehicle Advanced Warning System Development: A Two-Phase Study. by: (書目-語言資料,印刷品)

Rollover prediction using lateral energy models and active rollover prevention. by: (書目-語言資料,印刷品)

Homogeneous charge compression ignition steady state operation and mode switch with two-step cam and phasing system in metal and optical engine. by: (書目-語言資料,印刷品)

Advancements in driver distraction and driving performance assessment for robust in-vehicle systems. by: (書目-語言資料,印刷品)

Hybrid low-order modeling for conceptual vehicle design. by: (書目-語言資料,印刷品)

Implementation of Engine Control and Measurement Strategies for Biofuel Research in Compression-Ignition Engines. by: (書目-語言資料,印刷品)

Driver safety in far-side and far-oblique crashes: A study of patrol vehicles in the United States of America. by: (書目-語言資料,印刷品)

Math-model based gear-shift control strategy for advanced vehicle powertrain systems. by: (書目-電子資源)

Modeling and estimation for stepped automatic transmission with clutch-to-clutch shift technology. by: (書目-電子資源)

Intelligent maintenance in networked industrial automation systems. by: (書目-電子資源)

Next generation automotive event data recorder with inertial navigation system. by: (書目-電子資源)

Genetic algorithms with application to engineering optimization. by: (書目-電子資源)

Modeling and control strategy development for hybrid vehicles. by: (書目-電子資源)

Fault diagnostics for intelligent vehicle applications. by: (書目-電子資源)

Development of simplified models for automotive crashworthiness simulation and design using optimization. by: (書目-電子資源)

Development and application of individual and population-level human exposure models for fine particles and other vehicle-related air pollutants in Southern California. by: (書目-電子資源)

A streamlined LCA approach for conducting a cost and residual risk based evaluation of automobile recycling alternatives in the United States, Japan, and Europe. by: (書目-電子資源)

Unsteady convective heat transfer modeling and application to internal combustion engines. by: (書目-電子資源)

Modeling and analysis of source-commutated five-phase diode rectifier systems. by: (書目-電子資源)

Dynamics and failure analysis of architectural glazing subjected to blast loading. by: (書目-電子資源)

Exploring rollover performance of road vehicles. by: (書目-電子資源)

Adaptive modeling, integrated optimization, and control of automotive paint spray processes. by: (書目-電子資源)

Charting techniques in integrated APC and SPC environments. by: (書目-電子資源)

The wear and thermo-elastohydrodynamic behavior of thrust washer bearings under non-axisymmetric loads. by: (書目-電子資源)

A theoretical, experimental and CFD analysis of regenerative flow compressors and pumps for microturbine and automotive fuel applications. by: (書目-電子資源)

Probabilistic multivariate reliability designs with dependency structures. by: (書目-電子資源)

Product architecture and firm relations: The changing face of product development in United States auto. by: (書目-電子資源)

Multiaxial fatigue of rubber. by: (書目-電子資源)

Toward a multilevel knowledge transfer paradigm: Acquiring engineering capabilities in the Chinese automotive industry. by: (書目-電子資源)

A multi-methodological study of the firm boundary decision in automotive distribution and logistics: Theory, practice, and performance. by: (書目-電子資源)

Marketing of an innovative lifestyle product. by: (書目-電子資源)

Modeling reacting gases and aftertreatment devices for internal combustion engines. by: (書目-電子資源)

Quantification of volatile compounds in degraded engine oil. by: (書目-電子資源)

Optimizing thermoelectric waste heat recovery from an automotive cooling system. by: (書目-電子資源)

Dynamic driver workload assessment and its implications for highway design and operations. by: (書目-電子資源)

Robust camera self-calibration. by: (書目-電子資源)

Numerical prediction of gas-humidification effects on energy transfer in PEM fuel cells. by: (書目-電子資源)

Transmission electron microscopy investigation of auto catalyst and cobalt germanide. by: (書目-電子資源)

Traffic-friendly adaptive cruise control design. by: (書目-電子資源)

Development of sequential and fully integrated CFD/multi-zone models with detailed chemical kinetics for the simulation of HCCI engines. by: (書目-電子資源)

Compression pressurized direct fuel injection to reduce emissions from existing small two-stroke transports. by: (書目-電子資源)

Design considerations, modeling, and analysis of micro-homogeneous charge compression ignition combustion free-piston engines. by: (書目-電子資源)

An approach to decision-based design. by: (書目-電子資源)

Optimization of sub-components within a large system. by: (書目-電子資源)

Thermal buckling of automotive brake discs. by: (書目-電子資源)

Finite element analysis of automotive serpentine belt operation and failure. by: (書目-電子資源)

Defining the lean logistics learning enterprise: Examples from Toyota's North American supply chain. by: (書目-電子資源)

Development of a physics of failure model and quantitative assessment of fire fatality risks of compressed natural gas bus cylinders. by: (書目-電子資源)

Design forecasting: A method for performing DFX analyses in complex product design. by: (書目-電子資源)

Tracking control of a nonholonomic mobile robot by hybrid feedback and neural dynamics techniques. by: (書目-電子資源)

Transportation-related air quality modeling and analysis based on remote sensing and geospatial data. by: (書目-電子資源)

A high aspect-ratio high-performance polysilicon vibrating ring gyroscope. by: (書目-電子資源)

Direct numerical simulation of transport and electrochemical reaction in battery and fuel cell electrodes. by: (書目-電子資源)

Information content and format recommendations for automotive head-up displays. by: (書目-電子資源)

Estimation with applications for automobile dead reckoning and control. by: (書目-電子資源)

Some problems in nonlinear output regulation. by: (書目-電子資源)

Characterizing motor vehicle fleet emissions by open-path spectroscopy. by: (書目-電子資源)

Performance of a spark ignition dual-fueled engine using split-injection timing. by: (書目-電子資源)

Applications of stereoscopic vision to agriculture. by: (書目-電子資源)

Verification of the child crash test dummy neck response using magnetic resonance imaging and physiologic muscle stress. by: (書目-電子資源)

A parametric study of the lateral dynamics of a nonlinear four-wheel road-vehicle model. by: (書目-電子資源)

Modeling and sensorless control of solenoidal actuators. by: (書目-電子資源)

Analysis of automotive wheel made of composites. by: (書目-電子資源)

Design and analysis of a modified power-split continuously variable transmission. by: (書目-電子資源)

Force feedback control of the T3 Z-axis vehicle suspension system. by: (書目-電子資源)

Experimental characterization and dynamic simulation of a quadra link independent rear automotive suspension system. by: (書目-電子資源)

Automobile related applications of wireless sensor networks. by: (書目-電子資源)

Experimental measurement and finite element simulation of springback in stamping aluminum alloy sheets for auto-body panel application. by: (書目-電子資源)

Methods for robust driver pose estimation. by: (書目-電子資源)

The role of electronic data interchange (EDI) in automotive supply chains. by: (書目-電子資源)

Steam, Electricity & Gas: Historical perspectives on what we drive today and why. by: (書目-語言資料,印刷品)

Design and evaluation of CCA (Cooperative Collision Avoidance) applications for Vehicular Ad-hoc Networks. by: (書目-語言資料,印刷品)

A study of the effect of biodiesel fuel on passive oxidation in a catalyzed particulate filter. by: (書目-語言資料,印刷品)

Investigation of vehicle and driver aggressivity and relation to fuel economy testing. by: (書目-語言資料,印刷品)

Development of a restraint device for low birth-weight infants. by: (書目-語言資料,印刷品)

Use of a rolling road system in crosswind conditions. by: (書目-語言資料,印刷品)

Simulations and experiments of fuel injection, mixing and combustion in DI gasoline engines. by: (書目-語言資料,印刷品)

Investigation of Emissions and Fuel Economy for the Integrated Bus Information System. by: (書目-語言資料,印刷品)

Microstructure design of low alloy transformation-induced plasticity assisted steels. by: (書目-語言資料,印刷品)

Effect of intake temperature and boost pressure on the auto-ignition of fuels with different cetane numbers and volatilities. by: (書目-語言資料,印刷品)

Design principles of a Flywheel Regenerative Braking System (F-RBS) for Formula SAE type racecar and system testing on a virtual test rig modeled on MSC ADAMS. by: (書目-語言資料,印刷品)

Modeling and control of lithium-ion dynamic battery systems for automotive applications. by: (書目-語言資料,印刷品)

Battery modeling and control design for power systems driven by battery/supercapacitor hybrid energy storage devices. by: (書目-語言資料,印刷品)

End-of-life decision making models for sensor-embedded products. by: (書目-語言資料,印刷品)

Prediction of subsurface damage during machining nickel-based superalloys. by: (書目-語言資料,印刷品)

Investigation of Thermo-Mechanical Fatigue Characteristics for Cast Aluminum (AL319-T7). by: (書目-語言資料,印刷品)

Multi-scale dynamics of mechanical systems with friction. by: (書目-語言資料,印刷品)

Vehicle-infrastructure integration enabled plug-in hybrid electric vehicles for energy management. by: (書目-語言資料,印刷品)

Robust navigation control and headland turning optimization of agricultural vehicles. by: (書目-語言資料,印刷品)

Design, control and energy optimization of a rapid-prototyping hybrid powertrain research platform. by: (書目-語言資料,印刷品)

Modeling, Optimization and Hardware-in-Loop Simulation of Hybrid Electric Vehicles. by: (書目-語言資料,印刷品)

Conjugation modeling and planar gear tooth synthesis. by: (書目-語言資料,印刷品)

Development of methodology for designing wave disk engine based on wave dynamics and thermodynamic analysis. by: (書目-語言資料,印刷品)

Understanding fuel cell plug-in hybrid electric vehicle use, design, and functionality. by: (書目-語言資料,印刷品)

Methods for advancing automobile research with energy-use simulation. by: (書目-語言資料,印刷品)

Prediction de la distance residuelle d' un vehicule electrique. by: (書目-語言資料,印刷品)

Quantifying Drivers' Use of In-Vehicle Systems: Implications for Long-term Behavior. by: (書目-語言資料,印刷品)

Adaptive model based combustion phasing control for multi fuel spark ignition engines. by: (書目-語言資料,印刷品)

Robust and Cost-effective Vehicle Sideslip Estimation by using GPS. by: (書目-語言資料,印刷品)

Transient Modeling and Control of Split Cycle Clean Combustion Diesel Engine. by: (書目-語言資料,印刷品)

Unmanned Ground Vehicle navigation and coverage hole patching in Wireless Sensor Networks. by: (書目-語言資料,印刷品)

Inductive Power Transfer Systems for Charging of Electric Vehicles. by: (書目-語言資料,印刷品)

An Experimental Study of the Effects of In-Vehicle Supports and Cell Phone Usage on Young Drivers. by: (書目-語言資料,印刷品)

Economic based control system design. by: (書目-語言資料,印刷品)

A Three-Layered System Level Modeling Approach to Electric Transportation. by: (書目-語言資料,印刷品)

Coupled heating/forming optimization of knitted reinforced composites. by: (書目-語言資料,印刷品)

Techniques for engine mount modeling and optimization. by: (書目-語言資料,印刷品)

From the Real Vehicle to the Virtual Vehicle. by: (書目-語言資料,印刷品)

Extending and Characterizing Fuel Flexibility in Small-Scale Power Systems. by: (書目-語言資料,印刷品)

Pedestrian head protection during car to pedestrian accidents: In the event of primary impact with vehicle and secondary impact with ground. by: (書目-語言資料,印刷品)

Combustion visualization and particulate matter emission of a GDI engine by using gasoline and E85. by: (書目-語言資料,印刷品)

Agent-based modeling and simulation of cooperative driving. by: (書目-電子資源)

A Novel Globally Optimized Instantaneous Torque Ripple Minimization Method in Switched Reluctance Motors with Matrix Converter Drives. by: (書目-電子資源)

An investigation into the mechanisms of drag reduction of a boat tailed base cavity on a blunt based body. by: (書目-電子資源)