語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Development of GPS-based procedure f...
~
Imran, Muhammad.
FindBook
Google Book
Amazon
博客來
Development of GPS-based procedure for tracking vehicle path.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Development of GPS-based procedure for tracking vehicle path./
作者:
Imran, Muhammad.
面頁冊數:
131 p.
附註:
Source: Masters Abstracts International, Volume: 44-02, page: 0975.
Contained By:
Masters Abstracts International44-02.
標題:
Engineering, Civil. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=MR06791
ISBN:
9780494067918
Development of GPS-based procedure for tracking vehicle path.
Imran, Muhammad.
Development of GPS-based procedure for tracking vehicle path.
- 131 p.
Source: Masters Abstracts International, Volume: 44-02, page: 0975.
Thesis (M.A.Sc.)--Carleton University (Canada), 2005.
This thesis presents a GPS-GIS-based procedure to obtain the horizontal and vertical alignments of a road based on the path of a control vehicle. Using differential GPS surveying, field data were collected at a 0.1-second observation interval, under different speed conditions on two different sections of two-lane rural highways in eastern Ontario. The raw GPS data were post-processed to filter out possible errors and then imported into a GIS environment for analysis and interpretation. An extension for ArcView was written to determine the geometric features of the highway horizontal alignment, including the tangents, spirals, and circular curves. Values were obtained for the radius and length of seventeen circular curves, length of spirals, and the lateral position of vehicle path along the straight and curved segment. These were compared with the same features of the actual highway alignment. Results based on 0.1-second observation interval were better than those corresponding to higher observation intervals of 0.5-second and 1-second. The observed elevation data were converted to highway profiles using available software. During comparison with actual profiles, considerable difference was observed in absolute position of the fitted profiles whereas their relative position was very close to the actual ones. Highway segments with open surroundings gave better results than hilly or congested sections.
ISBN: 9780494067918Subjects--Topical Terms:
783781
Engineering, Civil.
Development of GPS-based procedure for tracking vehicle path.
LDR
:02650nmm 2200277 4500
001
1826466
005
20061218092640.5
008
130610s2005 eng d
020
$a
9780494067918
035
$a
(UnM)AAIMR06791
035
$a
AAIMR06791
040
$a
UnM
$c
UnM
100
1
$a
Imran, Muhammad.
$3
1915429
245
1 0
$a
Development of GPS-based procedure for tracking vehicle path.
300
$a
131 p.
500
$a
Source: Masters Abstracts International, Volume: 44-02, page: 0975.
502
$a
Thesis (M.A.Sc.)--Carleton University (Canada), 2005.
520
$a
This thesis presents a GPS-GIS-based procedure to obtain the horizontal and vertical alignments of a road based on the path of a control vehicle. Using differential GPS surveying, field data were collected at a 0.1-second observation interval, under different speed conditions on two different sections of two-lane rural highways in eastern Ontario. The raw GPS data were post-processed to filter out possible errors and then imported into a GIS environment for analysis and interpretation. An extension for ArcView was written to determine the geometric features of the highway horizontal alignment, including the tangents, spirals, and circular curves. Values were obtained for the radius and length of seventeen circular curves, length of spirals, and the lateral position of vehicle path along the straight and curved segment. These were compared with the same features of the actual highway alignment. Results based on 0.1-second observation interval were better than those corresponding to higher observation intervals of 0.5-second and 1-second. The observed elevation data were converted to highway profiles using available software. During comparison with actual profiles, considerable difference was observed in absolute position of the fitted profiles whereas their relative position was very close to the actual ones. Highway segments with open surroundings gave better results than hilly or congested sections.
520
$a
The results show that the developed procedure can produce both the horizontal and vertical alignment of a road quickly, accurately, and at a relatively low cost. In addition to the extraction of the alignment of a road, the procedure can be used to track the actual vehicle path under normal driving conditions and compare it with the horizontal alignment of a road in an investigation concerning driver behaviour.
590
$a
School code: 0040.
650
4
$a
Engineering, Civil.
$3
783781
650
4
$a
Geotechnology.
$3
1018558
650
4
$a
Engineering, Automotive.
$3
1018477
690
$a
0543
690
$a
0428
690
$a
0540
710
2 0
$a
Carleton University (Canada).
$3
1018407
773
0
$t
Masters Abstracts International
$g
44-02.
790
$a
0040
791
$a
M.A.Sc.
792
$a
2005
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=MR06791
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9217329
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入