東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Conjugation modeling and planar gear...

Yu, Bowen.

FindBook

Google Book

Amazon

博客來

Conjugation modeling and planar gear tooth synthesis.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Conjugation modeling and planar gear tooth synthesis./
作者:	Yu, Bowen.
面頁冊數:	129 p.
附註:	Source: Dissertation Abstracts International, Volume: 74-11(E), Section: B.
Contained By:	Dissertation Abstracts International74-11B(E).
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3588308
ISBN:	9781303263057

Conjugation modeling and planar gear tooth synthesis.
Yu, Bowen.

Conjugation modeling and planar gear tooth synthesis. - 129 p.

Source: Dissertation Abstracts International, Volume: 74-11(E), Section: B.

Thesis (Ph.D.)--Tennessee Technological University, 2013.

Conjugation is very common in machinery such as gearing, cam-followers and valves. With an increasingly more critical requirement for efficiency, power density and life, conjugation modification becomes one of the most important research subjects. Even though the modern conjugation theory is well-studied, conjugation design is so difficult that only simple classical geometries can be employed, dramatically limiting performance improvement. Deeply studying conjugation theory and geometry modeling theory, this dissertation proposes the first conjugation modeling theory and methodology for proper conjugation design and optimization.

ISBN: 9781303263057Subjects--Topical Terms:

783786
Engineering, Mechanical.

Conjugation modeling and planar gear tooth synthesis.
LDR:03255nam a2200325 4500 001 1966219
005 20141106122636.5
008 150210s2013 ||||||||||||||||| ||eng d
020 $a 9781303263057
035 $a (MiAaPQ)AAI3588308
035 $a AAI3588308
040 $a MiAaPQ $c MiAaPQ
100 1 $a Yu, Bowen. $3 2094068
245 1 0 $a Conjugation modeling and planar gear tooth synthesis.
300 $a 129 p.
500 $a Source: Dissertation Abstracts International, Volume: 74-11(E), Section: B.
500 $a Adviser: Kwun-Lon Ting.
502 $a Thesis (Ph.D.)--Tennessee Technological University, 2013.
520 $a Conjugation is very common in machinery such as gearing, cam-followers and valves. With an increasingly more critical requirement for efficiency, power density and life, conjugation modification becomes one of the most important research subjects. Even though the modern conjugation theory is well-studied, conjugation design is so difficult that only simple classical geometries can be employed, dramatically limiting performance improvement. Deeply studying conjugation theory and geometry modeling theory, this dissertation proposes the first conjugation modeling theory and methodology for proper conjugation design and optimization.
520 $a The whole work can be conceptually summarized as the novel manifold conjugation theory including smooth conjugation modeling and discrete conjugation modeling. Smooth conjugation modeling covers the classic conjugation based on differential geometry. Free-form method and splines are introduced to smooth conjugation theory enabling design freedom. Conjugation design is not limited to some fixed elementary geometries but given controllable design flexibility. With the design degrees of freedom, optimization is enabled and some methods and algorithms have been proposed for optimal performance.
520 $a In the theory of discrete conjugation modeling, discrete differential geometry is introduced into conjugation enabling discrete design flexibility. In conjugation design, finite element simulation is usually used for performance computation. Finite element method needs only discrete geometries which approximate the corresponding smooth geometries. Discrete conjugation is established to take the advantage of discrete degrees of freedom in computer aided geometry design and finite element simulation. Vibration, one of the most important conjugation properties, has been reduced significantly through discrete conjugation modeling and optimization.
520 $a For the conjugation design when loading condition and deformation are taken into account, a new theory called compensated conjugation is established based on transmission function and conjugation. This leads to a totally new perspective on tooth modification practice and a unified modification theory for all conjugation types. The theory has been rigorously established and the methodology practically examined for effectiveness.
590 $a School code: 0390.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Robotics. $3 1018454
650 4 $a Engineering, Automotive. $3 1018477
690 $a 0548
690 $a 0771
690 $a 0540
710 2 $a Tennessee Technological University. $b Mechanical Engineering. $3 1684485
773 0 $t Dissertation Abstracts International $g 74-11B(E).
790 $a 0390
791 $a Ph.D.
792 $a 2013
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3588308