東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Stereolithography of ceramics.

Griffith, Michelle Lynn.

FindBook

Google Book

Amazon

博客來

Stereolithography of ceramics.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Stereolithography of ceramics./
作者:	Griffith, Michelle Lynn.
面頁冊數:	214 p.
附註:	Chair: John W. Halloran.
Contained By:	Dissertation Abstracts International56-04B.
標題:	Engineering, Automotive. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9527637

Stereolithography of ceramics.
Griffith, Michelle Lynn.

Stereolithography of ceramics. - 214 p.

Chair: John W. Halloran.

Thesis (Ph.D.)--University of Michigan, 1995.

Rapid prototyping or freeform fabrication has become one of the fastest growing new technologies since its introduction in 1986. These prototypes are fabricated "freeform" directly from computer aided design (CAD) files without the use of molds. 'Stereolithography' was one of the first rapid prototyping technologies. This technique involves the polymerization of liquid monomers from exposure to ultraviolet radiation from a laser. With a stereolithography machine (SLA), a three-dimensional part or prototype is fabricated in a layer by layer process. The stereolithography process fabricates highly accurate objects in a matter of hours, but only a few polymeric materials are available now. The menu of available materials must be expanded, where one such area is in ceramics. With ceramic stereolithography, this process would fabricate net shape ceramics without the need of molds.Subjects--Topical Terms:

1018477
Engineering, Automotive.

Stereolithography of ceramics.
LDR:02723nam 2200289 a 45 001 969310
005 20110920
008 110921s1995 eng d
035 $a (UMI)AAI9527637
035 $a AAI9527637
040 $a UMI $c UMI
100 1 $a Griffith, Michelle Lynn. $3 1293364
245 1 0 $a Stereolithography of ceramics.
300 $a 214 p.
500 $a Chair: John W. Halloran.
500 $a Source: Dissertation Abstracts International, Volume: 56-04, Section: B, page: 2260.
502 $a Thesis (Ph.D.)--University of Michigan, 1995.
520 $a Rapid prototyping or freeform fabrication has become one of the fastest growing new technologies since its introduction in 1986. These prototypes are fabricated "freeform" directly from computer aided design (CAD) files without the use of molds. 'Stereolithography' was one of the first rapid prototyping technologies. This technique involves the polymerization of liquid monomers from exposure to ultraviolet radiation from a laser. With a stereolithography machine (SLA), a three-dimensional part or prototype is fabricated in a layer by layer process. The stereolithography process fabricates highly accurate objects in a matter of hours, but only a few polymeric materials are available now. The menu of available materials must be expanded, where one such area is in ceramics. With ceramic stereolithography, this process would fabricate net shape ceramics without the need of molds.
520 $a For ceramic stereolithography, ceramic powders are added to a UV-curable solution. After the ceramic suspension is cured by the laser, the result is a ceramic green body where the polymer is used as a binder to hold the ceramic particles together. This net shape green body is subsequently fired, to remove the binders and sinter the ceramic.
520 $a This dissertation addresses the freeform fabrication of ceramic materials using the technique of stereolithography. The main issues include rheology of highly concentrated ceramic suspensions, ultraviolet curing of these highly concentrated ceramic suspensions (experimental and theory), and ceramic part fabrication on a stereolithography machine. We have considered a range of ceramic materials, including silica, alumina, and silicon nitride. These were dispersed as powders in a variety of ultraviolet-curable solutions to create stereolithography suspensions. Freeform fabrication of ceramic parts has been achieved using a stereolithography machine.
590 $a School code: 0127.
650 4 $a Engineering, Automotive. $3 1018477
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0540
690 $a 0794
710 2 0 $a University of Michigan. $3 777416
773 0 $t Dissertation Abstracts International $g 56-04B.
790 $a 0127
790 1 0 $a Halloran, John W., $e advisor
791 $a Ph.D.
792 $a 1995
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9527637