東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Investigation of a semi-active muffl...

Michigan Technological University., Mechanical Engineering-Engineering Mechanics.

FindBook

Google Book

Amazon

博客來

Investigation of a semi-active muffler system with implementation on a snowmobile.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Investigation of a semi-active muffler system with implementation on a snowmobile./
作者:	Keske, Justin D.
面頁冊數:	400 p.
附註:	Adviser: Jason R. Blough.
Contained By:	Dissertation Abstracts International70-04B.
標題:	Engineering, Automotive. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3354985
ISBN:	9781109128208

Investigation of a semi-active muffler system with implementation on a snowmobile.
Keske, Justin D.

Investigation of a semi-active muffler system with implementation on a snowmobile. - 400 p.

Adviser: Jason R. Blough.

Thesis (Ph.D.)--Michigan Technological University, 2009.

Pass-by noise for snowmobiles as well as other vehicles is an increasing concern. Although not the only source, a good portion of the noise emitted by snowmobiles originates from the exhaust system. Space and weight restrictions on a snowmobile can make it difficult to attenuate exhaust noise to a desirable level only using passive mufflers. The use of a semi-active exhaust system, either stand alone or in conjunction with a traditional passive muffler, offers the opportunity to achieve good exhaust noise attenuation while keeping size and weight to a minimum.

ISBN: 9781109128208Subjects--Topical Terms:

1018477
Engineering, Automotive.

Investigation of a semi-active muffler system with implementation on a snowmobile.
LDR:03396nmm 2200349 a 45 001 890756
005 20101104
008 101104s2009 ||||||||||||||||| ||eng d
020 $a 9781109128208
035 $a (UMI)AAI3354985
035 $a AAI3354985
040 $a UMI $c UMI
100 1 $a Keske, Justin D. $3 1064723
245 1 0 $a Investigation of a semi-active muffler system with implementation on a snowmobile.
300 $a 400 p.
500 $a Adviser: Jason R. Blough.
500 $a Source: Dissertation Abstracts International, Volume: 70-04, Section: B, page: 2530.
502 $a Thesis (Ph.D.)--Michigan Technological University, 2009.
520 $a Pass-by noise for snowmobiles as well as other vehicles is an increasing concern. Although not the only source, a good portion of the noise emitted by snowmobiles originates from the exhaust system. Space and weight restrictions on a snowmobile can make it difficult to attenuate exhaust noise to a desirable level only using passive mufflers. The use of a semi-active exhaust system, either stand alone or in conjunction with a traditional passive muffler, offers the opportunity to achieve good exhaust noise attenuation while keeping size and weight to a minimum.
520 $a The semi-active muffler approach achieves this by making the muffler element more efficient. This is accomplished by actively changing the physical parameters of the muffler. This changes its attenuation characteristics to be most beneficial for attenuating the exhaust noise at any engine speed or operating condition. Knowledge of the engine exhaust noise characteristics along with measurements of engine rpm and other parameters will allow this to be done in real time.
520 $a In this dissertation, a thorough review of muffler acoustics is presented. The 4-pole parameter representation of mufflers is reviewed. Methods are employed for determining the 4-pole parameters of mufflers using experimental and boundary element modeling techniques. Muffler performance is quantified by Transmission Loss (TL) or Insertion Loss (IL) defined in terms of the 4-pole parameters. TL results determined by models and experiments are corroborated.
520 $a A semi-active muffler design is introduced, developed, and analyzed including refinement of the design after initial engine testing. The semi-active muffler is tested for functionality in the laboratory as well on a snowmobile engine. It is shown to function as designed, demonstrating the feasibility of the semi-active muffler concept. However, the added complexities of a semi-active muffler evidenced by this study suggest that only substantial size and weight savings coupled with improved attenuation performance would make the use of a semi-active muffler worthwhile. The findings tend to indicate that this may be very difficult to achieve. Nonetheless, the information provided in this dissertation will prove useful to future design of mufflers both passive and semi-active alike.
590 $a School code: 0129.
650 4 $a Engineering, Automotive. $3 1018477
650 4 $a Engineering, Mechanical. $3 783786
690 $a 0540
690 $a 0548
710 2 $a Michigan Technological University. $b Mechanical Engineering-Engineering Mechanics. $3 1043627
773 0 $t Dissertation Abstracts International $g 70-04B.
790 $a 0129
790 1 0 $a Blough, Jason R., $e advisor
790 1 0 $a Burl, Jeffrey B. $e committee member
790 1 0 $a Parker, Gordon G. $e committee member
790 1 0 $a Van Karsen, Charles D. $e committee member
791 $a Ph.D.
792 $a 2009
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3354985