東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

High-bandwidth unsteady microactuato...

Solomon, John T.

FindBook

Google Book

Amazon

博客來

High-bandwidth unsteady microactuators for active control of high-speed flows.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	High-bandwidth unsteady microactuators for active control of high-speed flows./
作者:	Solomon, John T.
面頁冊數:	160 p.
附註:	Source: Dissertation Abstracts International, Volume: 72-08, Section: B, page: .
Contained By:	Dissertation Abstracts International72-08B.
標題:	Engineering, Aerospace. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3458759
ISBN:	9781124680149

High-bandwidth unsteady microactuators for active control of high-speed flows.
Solomon, John T.

High-bandwidth unsteady microactuators for active control of high-speed flows. - 160 p.

Source: Dissertation Abstracts International, Volume: 72-08, Section: B, page: .

Thesis (Ph.D.)--The Florida State University, 2010.

Unsteady actuators with a high amplitude output and tunable frequency are needed for the effective and efficient control of many sub and supersonic flows. The development, design, characterization, modeling and implementation of a novel High-bandwidth micro fluidic actuator are described in this dissertation. A systematic study is followed to understand the resonance phenomena in microscales with the intent to utilize them for designing unsteady microjet actuators for the active control of low and high-speed flows. A supersonic microjet, issuing from a convergent nozzle of 1mm exit diameter, is studied extensively in a number of canonical configurations. The microjet, impinging normally on a flat surface with a flush mounted probe, under expanded into a short cylindrical cavity, grazing the sharp edges of a circular hole---are the configurations examined in this study. Some of these configurations of impinging microjets produced resonance that lead to the generation of high-amplitude, disturbances at very high frequencies for a range of geometric and flow parameters. The jet structure, strength and location of the standoff shock and the Mach disc etc. are observed to be closely related to the generation of high-amplitude flow unsteadiness. The impinging flowfield, characterized by discrete tonal features was found to be coupled with the highly unstable plate shock oscillations, visualized using a high magnification microschlieren system. It was found that if the plate shock is located inside a specific region within the first shock cell, the flowfield is more likely to become highly unsteady and often lead to resonance. This region is referred to as the region of instability (RoI).

ISBN: 9781124680149Subjects--Topical Terms:

1018395
Engineering, Aerospace.

High-bandwidth unsteady microactuators for active control of high-speed flows.
LDR:05458nam 2200325 4500 001 1403348
005 20111115085217.5
008 130515s2010 ||||||||||||||||| ||eng d
020 $a 9781124680149
035 $a (UMI)AAI3458759
035 $a AAI3458759
040 $a UMI $c UMI
100 1 $a Solomon, John T. $3 1682605
245 1 0 $a High-bandwidth unsteady microactuators for active control of high-speed flows.
300 $a 160 p.
500 $a Source: Dissertation Abstracts International, Volume: 72-08, Section: B, page: .
500 $a Adviser: Farrukh S. Alvi.
502 $a Thesis (Ph.D.)--The Florida State University, 2010.
520 $a Unsteady actuators with a high amplitude output and tunable frequency are needed for the effective and efficient control of many sub and supersonic flows. The development, design, characterization, modeling and implementation of a novel High-bandwidth micro fluidic actuator are described in this dissertation. A systematic study is followed to understand the resonance phenomena in microscales with the intent to utilize them for designing unsteady microjet actuators for the active control of low and high-speed flows. A supersonic microjet, issuing from a convergent nozzle of 1mm exit diameter, is studied extensively in a number of canonical configurations. The microjet, impinging normally on a flat surface with a flush mounted probe, under expanded into a short cylindrical cavity, grazing the sharp edges of a circular hole---are the configurations examined in this study. Some of these configurations of impinging microjets produced resonance that lead to the generation of high-amplitude, disturbances at very high frequencies for a range of geometric and flow parameters. The jet structure, strength and location of the standoff shock and the Mach disc etc. are observed to be closely related to the generation of high-amplitude flow unsteadiness. The impinging flowfield, characterized by discrete tonal features was found to be coupled with the highly unstable plate shock oscillations, visualized using a high magnification microschlieren system. It was found that if the plate shock is located inside a specific region within the first shock cell, the flowfield is more likely to become highly unsteady and often lead to resonance. This region is referred to as the region of instability (RoI).
520 $a A preliminary actuator design criteria is first derived from these results to design actuators for the active control of various supersonic and subsonic flows. The results clearly show that microjets produced by this actuator possess very high mean momentum (they are supersonic for most cases, hence >300 m/s) as well as a very significant unsteady component (more than 30% of the mean velocity). By the proper selection of geometric and fluid parameters, the frequency can be 'fine tuned' to any value in between 1--60 kHz in the present studies.
520 $a A lumped element modeling (LEM) approach is used to describe the aero-acoustic characteristics of the microactuator that can produce high amplitude pulsed microjets at a design frequency. In the LEM model the microactuator is considered to be an aeroacoustic resonator with a well defined natural frequency. The natural resonance frequency of the microactuator is derived from the basic principles of physical acoustics using an impedance model based on an electrical-acoustic analogy which considers it as a lumped system consisting of a number of elemental building blocks. The total acoustic impedance experienced by the acoustic mass of these elements is derived using the circuit analogy in terms of the geometric and flow parameters involved in the problem. This model uses an impedance minimum principle for calculating the resonance frequency with maximum amplitude. The LEM model for actuators with different geometry is compared with the corresponding experimental data, showing very good agreement for the entire range of the parametric space examined in this study.
520 $a Two supersonic test beds, an impinging supersonic jet and a cavity subjected to supersonic flow, were used to evaluate the flexibility and control efficiency of these actuators. For an impinging jet with base line unsteadiness around 3--6 kHz, actuator modules were designed, using the scaling principles developed earlier in the study, to produce microjet arrays in a frequency range similar to the base flow. These actuators were then integrated in the model near the nozzle exit. Activation of pulsed microjets into the flowfield resulted in interesting results such as: annihilation of primary tones and appearance of new tones in the impinging flowfield spectra. The frequency of these new tones neither matches the baseline nor the actuator frequency. It is considered that the high frequency actuation has changed the shear layer instability properties that essentially affect the evolution and dynamics of vortical structures in the jet shear layer. The energy content of the new tone is less than the original peaks resulting in an over all sound pressure level (OASPL) reduction of 4--5 dB, for most testing conditions. (Abstract shortened by UMI.)
590 $a School code: 0071.
650 4 $a Engineering, Aerospace. $3 1018395
650 4 $a Engineering, Automotive. $3 1018477
650 4 $a Engineering, Mechanical. $3 783786
690 $a 0538
690 $a 0540
690 $a 0548
710 2 $a The Florida State University. $3 1017727
773 0 $t Dissertation Abstracts International $g 72-08B.
790 1 0 $a Alvi, Farrukh S., $e advisor
790 $a 0071
791 $a Ph.D.
792 $a 2010
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3458759