東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Experimental study on tensile plasti...

Surampudi, Prashanth Venkata Satya.

FindBook

Google Book

Amazon

博客來

Experimental study on tensile plasticity of light metal engineering alloys for automotive application.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Experimental study on tensile plasticity of light metal engineering alloys for automotive application./
作者:	Surampudi, Prashanth Venkata Satya.
面頁冊數:	110 p.
附註:	Source: Masters Abstracts International, Volume: 44-05, page: 2438.
Contained By:	Masters Abstracts International44-05.
標題:	Engineering, Automotive. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1433368
ISBN:	9780542598227

Experimental study on tensile plasticity of light metal engineering alloys for automotive application.
Surampudi, Prashanth Venkata Satya.

Experimental study on tensile plasticity of light metal engineering alloys for automotive application. - 110 p.

Source: Masters Abstracts International, Volume: 44-05, page: 2438.

Thesis (M.S.)--Wayne State University, 2006.

This report is a summation of the research conducted on readily available Aluminum Alloys widely used in automotive manufacturing. The research conducted at Wayne State University was part of a project involving a new technology being developed for a faster and a more efficient forming of automotive components. It specifically deals with engineering alloys to be used for hot metal gas forming. Experiments were conducted at elevated temperatures with uniaxial tensile loading at varying temperatures and strain rate.

ISBN: 9780542598227Subjects--Topical Terms:

1018477
Engineering, Automotive.

Experimental study on tensile plasticity of light metal engineering alloys for automotive application.
LDR:02410nmm 2200313 4500 001 1830780
005 20070427114540.5
008 130610s2006 eng d
020 $a 9780542598227
035 $a (UnM)AAI1433368
035 $a AAI1433368
040 $a UnM $c UnM
100 1 $a Surampudi, Prashanth Venkata Satya. $3 1919600
245 1 0 $a Experimental study on tensile plasticity of light metal engineering alloys for automotive application.
300 $a 110 p.
500 $a Source: Masters Abstracts International, Volume: 44-05, page: 2438.
500 $a Adviser: Xin Wu.
502 $a Thesis (M.S.)--Wayne State University, 2006.
520 $a This report is a summation of the research conducted on readily available Aluminum Alloys widely used in automotive manufacturing. The research conducted at Wayne State University was part of a project involving a new technology being developed for a faster and a more efficient forming of automotive components. It specifically deals with engineering alloys to be used for hot metal gas forming. Experiments were conducted at elevated temperatures with uniaxial tensile loading at varying temperatures and strain rate.
520 $a The primary area of concentration was to analyze the flow stresses as a function of strain, strain rate and temperature. The results were used to select suitable materials and the corresponding optimal forming window of temperature and stain rate for HMGF.
520 $a Several aluminum alloys were tested at elevated temperatures (350-550°C) and at varying strain rates (0.0001s-1 to 1.0s-1). It was observed that AA5083 gave very good elongation required for HMGF, and AA6061-T6 showed good formability at 450°C-500°C and at high strain rates (0.1-1s-1), with relatively low flow stresses as compared with AA5083. In some cases a higher strain rate gave a higher total elongation. This unusual phenomenon is explained due to dynamic recrystallization and it is beneficial for automotive production. The samples from extruded tubes with lower thickness showed better formability than that of higher thickness, due to the much finer grain size of the thin-wall tubes.
590 $a School code: 0254.
650 4 $a Engineering, Automotive. $3 1018477
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0540
690 $a 0548
690 $a 0794
710 2 0 $a Wayne State University. $3 975058
773 0 $t Masters Abstracts International $g 44-05.
790 1 0 $a Wu, Xin, $e advisor
790 $a 0254
791 $a M.S.
792 $a 2006
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1433368