東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Design and optimization of fuel cell...

Gao, Lijun.

FindBook

Google Book

Amazon

博客來

Design and optimization of fuel cell/battery/supercapacitor hybrid power sources for electric vehicles.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Design and optimization of fuel cell/battery/supercapacitor hybrid power sources for electric vehicles./
作者:	Gao, Lijun.
面頁冊數:	123 p.
附註:	Source: Dissertation Abstracts International, Volume: 64-07, Section: B, page: 3432.
Contained By:	Dissertation Abstracts International64-07B.
標題:	Engineering, Electronics and Electrical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3098663

Design and optimization of fuel cell/battery/supercapacitor hybrid power sources for electric vehicles.
Gao, Lijun.

Design and optimization of fuel cell/battery/supercapacitor hybrid power sources for electric vehicles. - 123 p.

Source: Dissertation Abstracts International, Volume: 64-07, Section: B, page: 3432.

Thesis (Ph.D.)--University of South Carolina, 2003.

Fuel Cell powered Hybrid electric Vehicles (FCHVs) are considered to be the most promising alternatives of Internal Combustion Engines (ICE) vehicles. One of the most important research aspects of FCHVs is their hybrid power sources study; however, current research is insufficient and there are many open problems to be further studied, such as hybrid power sources topology analysis, vehicle power sources design and optimization, and related dynamic models construction. Also a powerful simulation package of FCHVs is indispensable to evaluate and support the related research. Addressing these problems, this dissertation carries out a series of studies step by step which includes the following three parts.Subjects--Topical Terms:

626636
Engineering, Electronics and Electrical.

Design and optimization of fuel cell/battery/supercapacitor hybrid power sources for electric vehicles.
LDR:03394nmm 2200313 4500 001 1857698
005 20040811084322.5
008 130614s2003 eng d
035 $a (UnM)AAI3098663
035 $a AAI3098663
040 $a UnM $c UnM
100 1 $a Gao, Lijun. $3 1945412
245 1 0 $a Design and optimization of fuel cell/battery/supercapacitor hybrid power sources for electric vehicles.
300 $a 123 p.
500 $a Source: Dissertation Abstracts International, Volume: 64-07, Section: B, page: 3432.
500 $a Major Professor: Roger A. Dougal.
502 $a Thesis (Ph.D.)--University of South Carolina, 2003.
520 $a Fuel Cell powered Hybrid electric Vehicles (FCHVs) are considered to be the most promising alternatives of Internal Combustion Engines (ICE) vehicles. One of the most important research aspects of FCHVs is their hybrid power sources study; however, current research is insufficient and there are many open problems to be further studied, such as hybrid power sources topology analysis, vehicle power sources design and optimization, and related dynamic models construction. Also a powerful simulation package of FCHVs is indispensable to evaluate and support the related research. Addressing these problems, this dissertation carries out a series of studies step by step which includes the following three parts.
520 $a The first part is focused on modeling electrochemical components. A novel fully dynamic lithium-ion battery model is developed, which accounts for battery nonlinear equilibrium potentials, rate- and temperature-dependencies, thermal effects and response to transient power demand. A multi-stage resistor capacitor ladder supercapacitor model is constructed with unique characteristics including automatic order selection and capacity scaling. In the modeling of a Proton Exchange Membrane (PEM) fuel cell system, each component is first modeled separately, and then these modules are coupled together into an integrative unit.
520 $a The second part concentrates on the study of hybrid power source topology analysis. Firstly, the concepts of passive hybrid and active hybrid are defined. Secondly, an active hybrid is constructed and explored through both experiments and simulations. Finally, the comparison of passive and active hybrids, along with battery alone, is undertaken to study the performance extension of power sources using power converters. The study process is further extended and applied in hybrid power source design for FCHVs.
520 $a In the third part, a complete simulation package for FCHVs is constructed in the Virtual Test Bed (VTB) computational environment. The modeling approach is forward looking (causal) and the system setup is modular, thus the package recognizes the dynamic interaction among different vehicle components and provides a powerful capability to simulate different topologies. After that, a novel 8-step energy component size determination and optimization method is proposed, which is based on the operation of the decreasing rearrangement distribution function of drive cycles.
590 $a School code: 0202.
650 4 $a Engineering, Electronics and Electrical. $3 626636
650 4 $a Engineering, Automotive. $3 1018477
650 4 $a Energy. $3 876794
690 $a 0544
690 $a 0540
690 $a 0791
710 2 0 $a University of South Carolina. $3 1017477
773 0 $t Dissertation Abstracts International $g 64-07B.
790 1 0 $a Dougal, Roger A., $e advisor
790 $a 0202
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3098663