東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

A study of alternative diesel fuel l...

Wain, Kimberly Susan.

Linked to FindBook

Google Book

Amazon

博客來

A study of alternative diesel fuel lubricity, deposit formation, and material compatibility: Dimethyl ether, biodiesel and ultra low sulfur diesel fuels.

Record Type:	Electronic resources : Monograph/item
Title/Author:	A study of alternative diesel fuel lubricity, deposit formation, and material compatibility: Dimethyl ether, biodiesel and ultra low sulfur diesel fuels./
Author:	Wain, Kimberly Susan.
Description:	249 p.
Notes:	Source: Dissertation Abstracts International, Volume: 65-07, Section: B, page: 3585.
Contained By:	Dissertation Abstracts International65-07B.
Subject:	Engineering, Chemical. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3140090
ISBN:	9780496872312

A study of alternative diesel fuel lubricity, deposit formation, and material compatibility: Dimethyl ether, biodiesel and ultra low sulfur diesel fuels.
Wain, Kimberly Susan.

A study of alternative diesel fuel lubricity, deposit formation, and material compatibility: Dimethyl ether, biodiesel and ultra low sulfur diesel fuels. - 249 p.

Source: Dissertation Abstracts International, Volume: 65-07, Section: B, page: 3585.

Thesis (Ph.D.)--The Pennsylvania State University, 2004.

As emissions restrictions on the diesel engine community continue to tighten, the search for alternative fuels with reduced tailpipe exhaust has become critical. Problems with utilizing alternative fuels are holding back their entrance into mass markets. This work focuses on three types of diesel fuels; ultra low sulfur diesel, biodiesel and dimethyl ether, and explores several critical operational issues.

ISBN: 9780496872312Subjects--Topical Terms:

1018531
Engineering, Chemical.

A study of alternative diesel fuel lubricity, deposit formation, and material compatibility: Dimethyl ether, biodiesel and ultra low sulfur diesel fuels.
LDR:03086nmm 2200349 4500 001 1820995
005 20061110073017.5
008 130610s2004 eng d
020 $a 9780496872312
035 $a (UnM)AAI3140090
035 $a AAI3140090
040 $a UnM $c UnM
100 1 $a Wain, Kimberly Susan. $3 1910189
245 1 2 $a A study of alternative diesel fuel lubricity, deposit formation, and material compatibility: Dimethyl ether, biodiesel and ultra low sulfur diesel fuels.
300 $a 249 p.
500 $a Source: Dissertation Abstracts International, Volume: 65-07, Section: B, page: 3585.
500 $a Advisers: Joe Perez; Seong Kim.
502 $a Thesis (Ph.D.)--The Pennsylvania State University, 2004.
520 $a As emissions restrictions on the diesel engine community continue to tighten, the search for alternative fuels with reduced tailpipe exhaust has become critical. Problems with utilizing alternative fuels are holding back their entrance into mass markets. This work focuses on three types of diesel fuels; ultra low sulfur diesel, biodiesel and dimethyl ether, and explores several critical operational issues.
520 $a Viscosities of ultra low sulfur diesel (ULSDF), biodiesel, and dimethyl ether (DME) blended and with additives were explored using a new high pressure capillary viscometer. It was found that existing additives are not capable of improving the viscosity of a 25 wt % DME-ULSDF or biodiesel blend unless used at very high concentrations. Existing blending theory is capable of predicting the response of low viscosity components. The effect of pressure on viscosity was explored and determined to be minimal.
520 $a Data from a Cameron-Plint wear testing machine, modified to mimic fuel injector operation, showed that increasing the concentration of DME in fuel blends resulted in increased wear of the components. A profilometer for wear scar measurement was employed to quantify wear.
520 $a Elastomer durability in alternative fuels is critical to engine operation. Currently used elastomer types are not robust in the harsh chemical environment provided by DME. Highly fluorinated polymers resisted breakdown, while non-fluorinated types degraded readily.
520 $a ULSDF deposits formed at engine operating temperatures were caused by the fuel's molecular makeup. Severe refining to remove trace quantities of sulfur causes significant shifts in the molecular weight distribution and functional groupings. High aromatic and unsaturates content were responsible for this shift, and when removed, deposits were significantly reduced. Deposit characterization revealed the formation mechanism was both metal catalyzed and bulk fuel polycondensation, resulting in little or no distinct layer formation.
590 $a School code: 0176.
650 4 $a Engineering, Chemical. $3 1018531
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Automotive. $3 1018477
690 $a 0542
690 $a 0548
690 $a 0540
710 2 0 $a The Pennsylvania State University. $3 699896
773 0 $t Dissertation Abstracts International $g 65-07B.
790 1 0 $a Perez, Joe, $e advisor
790 1 0 $a Kim, Seong, $e advisor
790 $a 0176
791 $a Ph.D.
792 $a 2004
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3140090