東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Development of an electronic sensor ...

Warey, Alok Arun.

FindBook

Google Book

Amazon

博客來

Development of an electronic sensor for engine exhaust particulate measurements.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Development of an electronic sensor for engine exhaust particulate measurements./
作者:	Warey, Alok Arun.
面頁冊數:	191 p.
附註:	Source: Dissertation Abstracts International, Volume: 67-01, Section: B, page: 0508.
Contained By:	Dissertation Abstracts International67-01B.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3204206
ISBN:	9780542500312

Development of an electronic sensor for engine exhaust particulate measurements.
Warey, Alok Arun.

Development of an electronic sensor for engine exhaust particulate measurements. - 191 p.

Source: Dissertation Abstracts International, Volume: 67-01, Section: B, page: 0508.

Thesis (Ph.D.)--The University of Texas at Austin, 2005.

A new electronic sensor has been developed to measure the time-resolved concentration of carbonaceous particulate matter (PM) emitted in engine exhaust. The sensor is approximately the size of a standard automotive spark-plug or lambda sensor and can be mounted directly in the engine exhaust. It consists of a pair of closely spaced electrically isolated electrodes that protrude into the exhaust flow. One electrode is given a voltage bias of approximately 1000 V while the other is the signal electrode. The sensor is capable of providing cycle-resolved feedback on the carbonaceous PM concentration in the exhaust to the engine control unit (ECU), thereby enabling real-time control of engine operating parameters. The sensor was tested in exhaust flows from a single cylinder diesel engine and from a steady-state acetylene diffusion flame in a flow tunnel. Steady-state engine measurements were made over a range of speed and load conditions while transient measurements were performed during engine start-ups and accelerations. The sensor response was compared to an opacity meter, gravimetric filter measurements, an aerodynamic particle sizer and a light scattering nephelometer. The output of the sensor compared well with exhaust opacity for the transient measurements and to filter mass loading for the steady-state tests.

ISBN: 9780542500312Subjects--Topical Terms:

783786
Engineering, Mechanical.

Development of an electronic sensor for engine exhaust particulate measurements.
LDR:03306nmm 2200301 4500 001 1826915
005 20061222083444.5
008 130610s2005 eng d
020 $a 9780542500312
035 $a (UnM)AAI3204206
035 $a AAI3204206
040 $a UnM $c UnM
100 1 $a Warey, Alok Arun. $3 1915866
245 1 0 $a Development of an electronic sensor for engine exhaust particulate measurements.
300 $a 191 p.
500 $a Source: Dissertation Abstracts International, Volume: 67-01, Section: B, page: 0508.
500 $a Adviser: Matthew J. Hall.
502 $a Thesis (Ph.D.)--The University of Texas at Austin, 2005.
520 $a A new electronic sensor has been developed to measure the time-resolved concentration of carbonaceous particulate matter (PM) emitted in engine exhaust. The sensor is approximately the size of a standard automotive spark-plug or lambda sensor and can be mounted directly in the engine exhaust. It consists of a pair of closely spaced electrically isolated electrodes that protrude into the exhaust flow. One electrode is given a voltage bias of approximately 1000 V while the other is the signal electrode. The sensor is capable of providing cycle-resolved feedback on the carbonaceous PM concentration in the exhaust to the engine control unit (ECU), thereby enabling real-time control of engine operating parameters. The sensor was tested in exhaust flows from a single cylinder diesel engine and from a steady-state acetylene diffusion flame in a flow tunnel. Steady-state engine measurements were made over a range of speed and load conditions while transient measurements were performed during engine start-ups and accelerations. The sensor response was compared to an opacity meter, gravimetric filter measurements, an aerodynamic particle sizer and a light scattering nephelometer. The output of the sensor compared well with exhaust opacity for the transient measurements and to filter mass loading for the steady-state tests.
520 $a Various parameters that affect the performance of the electronic sensor were studied. Parameters considered included sensor electrode length, diameter, electrode spacing, applied bias voltage, bulk flow velocity across the sensor electrodes, and the concentration of carbonaceous particulate matter in engine exhaust. The sensor signal varied linearly with the carbon mass concentration in the exhaust, the applied bias voltage and electrode length; it varied exponentially with the flow velocity, and had an inverse power dependence on the spacing between the electrodes. Electrode diameter did not have a significant effect on the sensor signal. A correlation was developed to predict the sensor signal under any engine operating condition and values of these parameters.
520 $a Based on the experimental data a hypothesis explaining the physical mechanism governing sensor behavior, regarding the charge transport between the two electrodes of the sensor, was proposed. A 1-D drift-diffusion model was developed to support this hypothesis.
590 $a School code: 0227.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Automotive. $3 1018477
690 $a 0548
690 $a 0540
710 2 0 $a The University of Texas at Austin. $3 718984
773 0 $t Dissertation Abstracts International $g 67-01B.
790 1 0 $a Hall, Matthew J., $e advisor
790 $a 0227
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3204206