Mechanics.
Overview
| Works: | 873 works in 184 publications in 184 languages | |
|---|---|---|
Titles
Engineering against fracture = proceedings of the 1st conference /
by:
(Language materials, printed)
Tensor algebra and tensor analysis for engineers = with applications to continuum mechanics /
by:
(Language materials, printed)
IUTAM Symposium on Cellular, Molecular and Tissue Mechanics = Proceedings of the IUTAM symposium held at Woods Hole, Mass., USA, June 18-21, 2008 /
by:
(Language materials, printed)
The theory of the top.. Volume II,. Development of the theory in the case of the heavy symmetric top
by:
(Language materials, printed)
The complete works of Gabrio Piola. = commented English translation /. Volume I
by:
(Electronic resources)
Classical mechanics = transformations, flows, integrable, and chaotic dynam
by:
(Language materials, printed)
Molecular thermodynamics and transport phenomena : = complexities of scales in space and time /
by:
(Language materials, printed)
Statistical Physics = Including Applications to Condensed Matter /
by:
(Language materials, printed)
Masonry constructions = mechanical models and numerical applications /
by:
(Language materials, printed)
Mechanics of Elastic Structures with Inclined Members = Analysis of Vibration, Buckling and Bending of X-Braced Frames and Conical Shells /
by:
(Language materials, printed)
Polymer Engineering Science and Viscoelasticity = An Introduction /
by:
(Language materials, printed)
Structures Under Crash and Impact = Continuum Mechanics, Discretization and Experimental Characterization /
by:
(Language materials, printed)
Quantum Transport = Modelling, Analysis and Asymptotics - Lectures given at the C.I.M.E. Summer School held in Cetraro, Italy September 11-16, 2006 /
by:
(Language materials, printed)
Physics of Asymmetric Continuum: Extreme and Fracture Processes = Earthquake Rotation and Soliton Waves /
by:
(Language materials, printed)
Introduction to classical mechanics : = with problems and solutions /
by:
(Language materials, printed)
IUTAM Symposium on Modelling Nanomaterials and Nanosystems = proceedings of the IUTAM symposium held in Aalborg, Denmark, 19-22 May 2008 /
by:
(Language materials, printed)
Structural synthesis of parallel robots. = Translational topologies with two and three degrees of freedom /. Part 2
by:
(Language materials, printed)
Computational mechanics = Proceedings of "International Symposium on Computational Mechanics", July 30-August 1, 2007, Beijing, China /
by:
(Language materials, printed)
Image correlation for shape, motion and deformation measurements = basic concepts, theory and applications /
by:
(Language materials, printed)
Mechanics of non-holonomic systems = a new class of control systems /
by:
(Language materials, printed)
Mechanics of microstructured solids = cellular materials, fibre reinforced solids and soft tissues /
by:
(Language materials, printed)
Numerics of unilateral contacts and friction = modeling and numerical time integration in non-smooth dynamics /
by:
(Language materials, printed)
David Hilbert's lectures on the foundations of physics, 1915-1927 = relativity, quantum theory and epistemology /
by:
(Language materials, printed)
Mechanical systems, classical models.. Volume II,. Mechanics of discrete and continuous systems
by:
(Language materials, printed)
Advanced materials and technologies for micro/nano-devices, sensors and actuators
by:
(Language materials, printed)
Semiclassical approach to mesoscopic systems = classical trajectory correlations and wave interference /
by:
(Electronic resources)
Computational methods to study the structure and dynamics of biomolecules and biomolecular processes = from bioinformatics to molecular quantum mechanics /
by:
(Electronic resources)
Elasticity for geotechnicians = a modern exposition of Kelvin, Boussinesq, Flamant, Cerruti, Melan, and Mindlin problems /
by:
(Electronic resources)
Structural synthesis of parallel robots.. Part 5,. Basic overconstrained topologies with Schonflies motions
by:
(Electronic resources)
Dynamics of underactuated multibody systems = modeling, control and optimal design /
by:
(Electronic resources)
Spectral Finite Element Method = Wave Propagation, Diagnostics and Control in Anisotropic and Inhomogeneous Structures /
by:
(Language materials, printed)
Iutam symposium on scaling in solid mechanics = proceedings of the Iutam symposium held in Cardiff, UK, 25-29 June, 2007 /
by:
(Language materials, printed)
Geometric mechanics and symmetry : = from finite to infinite dimensions /
by:
(Language materials, printed)
The sine-Gordon model and its applications = from Pendula and Josephson junctions to gravity and high-energy Physics /
by:
(Electronic resources)
Similarity and symmetry methods = applications in elasticity and mechanics of materials /
by:
(Electronic resources)
EU leadership in energy and environmental governance = global and local challenges and responses /
by:
(Electronic resources)
Theoretical physics = mechanics of particles, rigid and elastic bodies, flu
by:
(Language materials, printed)
Elements of Newtonian mechanics : = including nonlinear dynamics /
by:
(Language materials, printed)
The Rational Spirit in Modern Continuum Mechanics = Essays and Papers Dedicated to the Memory of Clifford Ambrose Truesdell III /
by:
(Language materials, printed)
An Introduction to Differential Geometry with Applications to Elasticity
by:
(Language materials, printed)
Engineering Damage Mechanics = Ductile, Creep, Fatigue and Brittle Failures /
by:
(Language materials, printed)
Mechanical Modelling and Computational Issues in Civil Engineering
by:
(Language materials, printed)
Gravity, Black Holes, and the Very Early Universe = An Introduction to General Relativity and Cosmology /
by:
(Language materials, printed)
Stability and Convergence of Mechanical Systems with Unilateral Constraints
by:
(Language materials, printed)
Advanced Materials and Structures for Extreme Operating Conditions
by:
(Language materials, printed)
Russian models from the mechanisms collection of bauman university
by:
(Language materials, printed)
IUTAM Symposium on theoretical, computational and modelling aspects of inelastic media = proceedings of the IUTAM Symposium held at Cape Town, South Africa, January 14-18, 2008 /
by:
(Language materials, printed)
Mathematical methods for mechanics = a handbook with MATLAB experiments /
by:
(Language materials, printed)
Mechanics of microstructured solids 2 = cellular materials, fibre reinforced solids and soft tissues /
by:
(Language materials, printed)
Advances in mathematical modeling and experimental methods for materials and structures = the Jacob Aboudi volume /
by:
(Language materials, printed)
New directions in mathematical fluid mechanics = the Alexander V. Kazhikhov memorial volume /
by:
(Language materials, printed)
Classical mechanics = systems of particles and hamiltonian dynamics /
by:
(Language materials, printed)
Development and application of the finite element method based on MATLAB
by:
(Language materials, printed)
Materials with complex behaviour = modelling, simulation, testing, and applications /
by:
(Language materials, printed)
Constrained deformation of materials = devices, heterogeneous structures and thermo-mechanical modeling /
by:
(Language materials, printed)
Tractable models of solid mechanics = formulation, analysis and interpretation /
by:
(Electronic resources)
IUTAM symposium on nonlinear stochastic dynamics and control = proceedings of the IUTAM Symposium held in Hangzhou, China, May 10-14, 2010 /
by:
(Electronic resources)
Dynamic behavior of materials. = proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics /. Volume 1
by:
(Electronic resources)
MEMS and nanotechnology. = proceedings of the 2010 annual conference on experimental and applied mechanics /. Volume 2
by:
(Electronic resources)
Structural synthesis of parallel robots.. Part 4,. Other topologies with two and three degrees of freedom
by:
(Electronic resources)
A concise introduction to mechanics of rigid bodies = multidisciplinary engineering /
by:
(Electronic resources)
Continuum damage mechanics = a continuum mechanics approach to the analysis of damage and fracture /
by:
(Electronic resources)
Mechanical behaviour of materials.. Volume 1,. Micro- and macroscopic constitutive behaviour
by:
(Electronic resources)
Numerical analysis of vibrations of structures under moving inertial load
by:
(Electronic resources)
The theory of the top.. Volume III,. Perturbations. Astronomical and geophysical applications
by:
(Electronic resources)
Proceedings of International Conference on Advances in Tribology and Engineering Systems = ICATES 2013 /
by:
(Electronic resources)
Gradually-varied flow profiles in open channels = analytical solutions by using Gaussian hypergeometric function /
by:
(Electronic resources)
The theory of the top. = Technical applications of the theory of the top. Volume IV :
by:
(Electronic resources)
Collective dynamics from bacteria to crowds = an excursion through modeling, analysis and simulation /
by:
(Electronic resources)
Classical mechanics illustrated by modern physics : = 42 problems with solutions /
by:
(Language materials, printed)
Continuum mechanics through the eighteenth and nineteenth centuries = historical perspectives from John Bernoulli (1727) to Ernst Hellinger (1914) /
by:
(Electronic resources)
Efficient implementation of high-order accurate numerical methods on unstructured grids
by:
(Electronic resources)
Principles of astrophysics = using gravity and stellar physics to explore the cosmos /
by:
(Electronic resources)
An introduction to Riemannian geometry = with applications to mechanics and relativity /
by:
(Electronic resources)
The interaction between flexible plates and fluid in two-dimensional flow
by:
(Electronic resources)
Mathematical and computational analyses of cracking formation = fracture morphology and its evolution in engineering materials and structures /
by:
(Electronic resources)
Handbook of damage mechanics = nano to macro scale for materials and structures /
by:
(Electronic resources)
Friction material composites = copper-/metal-free material design perspective /
by:
(Electronic resources)
Tensor algebra and tensor analysis for engineers = with applications to continuum mechanics /
by:
(Electronic resources)
Structural vibration = a uniform accurate solution of laminated beams, plates and shells with general boundary conditions /
by:
(Electronic resources)
Elementary mechanics using Python = a modern course combining analytical and numerical techniques /
by:
(Electronic resources)
Elementary mechanics using Matlab = a modern course combining analytical and numerical techniques /
by:
(Language materials, printed)
Continuum mechanics using Mathematica = fundamentals, methods, and applications /
by:
(Electronic resources)
Developments in mathematical and conceptual physics = concepts and applications for engineers /
by:
(Electronic resources)
Trends in nanoscale mechanics = mechanics of carbon nanotubes, graphene, nanocomposites and molecular dynamics /
by:
(Electronic resources)
Strength of materials and theory of elasticity in 19th century Italy = a brief account of the history of mechanics of solids and structures /
by:
(Electronic resources)
Acoustic, electromagnetic, neutron emissions from fracture and earthquakes
by:
(Electronic resources)
Investigations on microstructure and mechanical properties of the Cu/Pb-free solder joint interfaces
by:
(Electronic resources)
Gravitation, inertia and weightlessness = centrifugal and gyroscopic effects of the n-body system's interaction energy /
by:
(Electronic resources)
Mechanics IUTAM USNC/TAM = a history of people, events, and communities /
by:
(Electronic resources)
Design of a Dynamic Seal to Enable Movement of a Film or Filament Through a Pressurized Space While Maintaining a Desired Pressure.
by:
(Electronic resources)
Effects of fiber type and manufacturing process on the mechanical properties of natural fiber composite fiberboard.
by:
(Electronic resources)
Thermal Assessment of a Latent-Heat Energy Storage Module During Melting and Freezing for Solar Energy Applications.
by:
(Electronic resources)
Characterization of ceramic/glass composite seals for solid oxide fuel cells.
by:
(Electronic resources)
Modal identification of linear time periodic systems with applications to Continuous-Scan Laser Doppler Vibrometry.
by:
(Electronic resources)
Classical mechanics = including an introduction to the theory of elasticity /
by:
(Electronic resources)
Emergence of the quantum from the classical = mathematical aspects of quantum processes /
by:
(Electronic resources)
Studies into Computational Intelligence Approaches for the Identification of Complex Nonlinear Systems.
by:
(Electronic resources)
Efficient Adjacency Queries and Dynamic Refinement for Meshfree Methods with Applications to Explicit Fracture Modeling.
by:
(Electronic resources)
Hybrid Photomechanical Analyses of Finite Isotropic and Orthotropic Composite Structures Containing Various Geometric Discontinuities.
by:
(Electronic resources)
PIEZOELECTRIC LAMINATES FOR TORSIONAL AND BENDING MODAL CONTROL: THEORY AND EXPERIMENT.
by:
(Electronic resources)
THEORY OF ACOUSTOPLASTICITY AND ULTRASONIC MEASUREMENTS OF RESIDUAL STRESSES.
by:
(Electronic resources)
Cracks in vanishingly thin inhomogeneities and the associated energy release rates.
by:
(Electronic resources)
Computational Modelling of Progressive Damage in Viscoelastic-Viscoplastic Composite Materials.
by:
(Electronic resources)
Proceedings of the 8th International Conference on Fracture, Fatigue and Wear = FFW 2020, August 26-27 2020 /
by:
(Electronic resources)
Non-equilibrium evaporation and condensation processes = analytical solutions /
by:
(Electronic resources)
Phase behavior of two-dimensional water confined in graphene nanocapillaries
by:
(Electronic resources)
Rational and applied mechanics.. Volume 1,. Complete general course for students of engineering
by:
(Electronic resources)
Contact and Tribology of Surfaces with Engineered Topography and Multilayer Coatings.
by:
(Electronic resources)
Anisotropic Thermal Properties of Nanostructured Magnetic, Carbon and Hybrid Magnetic - Carbon Materials.
by:
(Electronic resources)
Multi-scale Modeling of Polymer Thin Films towards Predicting Thermomechanical Behaviors of Nanomaterials under Nanoconfinement.
by:
(Electronic resources)
Stability Behavior of Pultruded Glass-Fiber Reinforced Polymer I-sections Subject to Flexure.
by:
(Electronic resources)
Structural Optimization of 3D Printed Designs With Spatially-Varying Material Properties.
by:
(Electronic resources)
A Finite Element Method for Modeling Surface Growth and Resorption of Deformable Bodies with Applications to Cell Migration.
by:
(Electronic resources)
Mechanics, waves and thermodynamics : = an example-based approach /
by:
(Language materials, printed)
Mechanical Characterization of Nanoporous Thin Films by Nanoindentation and Laser-induced Surface Acoustic Waves.
by:
(Electronic resources)
Contact stresses of meshing gear teeth use of automatic incremental finite element techniques.
by:
(Electronic resources)
Identifying the Unique Ground Motion Signatures of Supershear Earthquakes: Theory and Experiments.
by:
(Electronic resources)
Variational and 2D Finite Element Formulations for Size-dependent Elasticity and Piezoelectricity.
by:
(Electronic resources)
Algorithmic Improvements to Sweeping and Multi-Sweeping Volume Mesh Generation.
by:
(Electronic resources)
Fabrication, Characterization, And Deformation of 3D Structural Meta-Materials.
by:
(Electronic resources)
Mechanical characterization and modeling of three-dimensional carbon nanotube structures.
by:
(Electronic resources)
Adaptive Spline-based Finite Element Method with Application to Phase-field Models of Biomembranes.
by:
(Electronic resources)
Lateral dynamics of an axially translating medium: A theoretical and experimental study on the effects of guiding components.
by:
(Electronic resources)
Shape Memory Alloy Modeling and Applications to Porous and Composite Structures.
by:
(Electronic resources)
Mechanical behavior and deformation mechanism in light metals at different strain rates.
by:
(Electronic resources)
A new type of Tuned Liquid Damper and its effectiveness in enhancing seismic performance: Numerical characterization, experimental validation, parametric analysis and life-cycle based design.
by:
(Electronic resources)
Damage detection and characterization of fiber-reinforced composites using ultrasonics.
by:
(Electronic resources)
A probabilistic model for failure of polycrystaline silicon MEMS structures.
by:
(Electronic resources)
Multiple Grid Multiple Time-Scale (MGMT) Simulations in Linear Structural Dynamics.
by:
(Electronic resources)
Time and frequency domain finite element analysis of vibratory drum interaction with layered earthwork.
by:
(Electronic resources)
Fully electronic method of measuring post-release gap and gradient/residual stress of a mems cantilever.
by:
(Electronic resources)
Far-field evolution of turbulence-emitted internal waves and reynolds number effects on a localized stratified turbulent flow.
by:
(Electronic resources)
Rate and Microstructure Effects on the Dynamics of Carbon Nanotube Foams.
by:
(Electronic resources)
Surface Damage in Micro-Architected Materials for High Heat Flux Applications.
by:
(Electronic resources)
A dislocation-based multiscale modeling of plasticity and controlling mechanisms.
by:
(Electronic resources)
Asymptotic and numerical analysis of fluid-structure interactions at different Reynolds numbers.
by:
(Electronic resources)
Problems in classical and quantum mechanics = extracting the underlying concepts /
by:
(Electronic resources)
Thermo-mechanical Stability and Strengthening Mechanisms of Ti/Ni Multilayer Thin Films.
by:
(Electronic resources)
Online Parameter Estimation and Adaptive Control of Magnetic Wire Actuators.
by:
(Electronic resources)
A Comprehensive Strategy for the Assessment of Stability Conditions in Porous Media at Varying Levels of Water Saturation.
by:
(Electronic resources)
Advances in efficient adaptive simulations of articulated multibody systems.
by:
(Electronic resources)
On the coupled evolution of oceanic internal waves and quasi-geostrophic flow.
by:
(Electronic resources)
Enabling efficient vertical takeoff/landing and forward flight of unmanned aerial vehicles: Design and control of tandem wing-tip mounted rotor mechanisms.
by:
(Electronic resources)
Measuring Colloidal Charges in Low Polar Media from Statistics of Particle Trajectories.
by:
(Electronic resources)
Experimental, Analytical and Numerical Analyses of Orthotropic Materials and Biomechanics Application.
by:
(Electronic resources)
Response of steel and composite beams subjected to combined shear and fire loading.
by:
(Electronic resources)
Static and dynamic behavior of carbon fiber reinforced aluminum (CARALL) laminates.
by:
(Electronic resources)
Mechanical Behavior of Al-SiC Nanolaminate Composites Using Micro-Scale Testing Methods.
by:
(Electronic resources)
Continuum modeling using granular micromechanics approach: Method development and applications.
by:
(Electronic resources)
Understanding Local-Scale Fault Interaction Through Seismological Observation and Numerical Earthquake Simulation.
by:
(Electronic resources)
Molecular Dynamics Simulations of Interfaces in Thin Films and Rapid Solidification.
by:
(Electronic resources)
Manufacturing and Characterization of Temperature-Stable, Novel, Viscoelastic Polyurea Based Foams for Impact Management.
by:
(Electronic resources)
Free-vibrational analysis of rotating beam-like structures: A dynamic finite element approach.
by:
(Electronic resources)
Energy dissipation mechanisms in microcantilever oscillators with applications to the detection of small forces.
by:
(Electronic resources)
Investigation on dielectrophoretic assembly of nanostructures and its application on chemical sensors.
by:
(Electronic resources)
Inclusion Based Boundary Element Method for Modeling and Simulation of Composite Materials.
by:
(Electronic resources)
Colloidal particles at fluid interfaces: Adsorption, assembly, and mechanics.
by:
(Electronic resources)
Sound reception mechanism analysis of a Cuvier's beaked whale (Ziphius cavirostris).
by:
(Electronic resources)
Analytical modeling of a novel microdisk resonator for liquid-phase sensing: an all-shear interaction device (ASID).
by:
(Electronic resources)
Characterization of a Pneumatic Strain Energy Accumulator: Efficiency and First Principles Models with Uncertainty Analysis.
by:
(Electronic resources)
Analytical and experimental studies of thermoelectric devices and materials.
by:
(Electronic resources)
Electromagnetic and Mechanical Perturbations of Photonic Crystal Slab Sensors.
by:
(Electronic resources)
Finite Strain Micromorphic Elasticity, Elastoplasticity, and Dynamics for Multiscale Finite Element Analysis.
by:
(Electronic resources)
Effective properties of magneto-electro-elastic two-dimensional cellular solids.
by:
(Electronic resources)
Parametric Opto-Mechanical Performance Analysis of Mounted Lenses Under Thermal Loading.
by:
(Electronic resources)
Wave Propagation Analysis and Inverse Modeling to Identify Fluid-Solid Interfaces and Moving-Source Functions.
by:
(Electronic resources)
Nonlinear Dispersive Elastic Waves in Solids: Exact, Approximate, and Numerical Solutions.
by:
(Electronic resources)
Finite element simulation of nanoindentation in lamellar bone composites.
by:
(Electronic resources)
Selected Methods for Field-Controlled Reconfiguration of Soft-Matter Electrical Contacts.
by:
(Electronic resources)
Analytical and Computational Modeling of Mechanical Waves in Microscale Granular Crystals: Nonlinearity and Rotational Dynamics.
by:
(Electronic resources)
Generation, Analysis and Characterization of Anisotropic Engineered Meta Materials.
by:
(Electronic resources)
Stabilized variational formulation for direct solution of inverse problems in heat conduction and elasticity with discontinuities.
by:
(Electronic resources)
Design, fabrication, and performance characterization of multifunctional structures to harvest solar energy for flapping wing aerial vehicles.
by:
(Electronic resources)
A High-Order Computational Framework for Simulating Flows around Rotating and Moving Objects.
by:
(Electronic resources)
Bounding volume hierarchy and non-uniform rational B-splines for contact enforcement in large deformation finite element analysis of sheet metal forming.
by:
(Electronic resources)
Modeling heat and mass transfer in reacting gas-solid flow using particle-resolved direct numerical simulation.
by:
(Electronic resources)
A Coupled Viscoelastic and Damage Approach for Solids with Applications to Ice and Asphalt.
by:
(Electronic resources)
Understanding the Mechanics of Tissue Growth in Engineered Scaffolds: Case of Cartilage Tissue.
by:
(Electronic resources)
Composite Beam Theory with Material Nonlinearities and Progressive Damage.
by:
(Electronic resources)
Effects of Time-Varying Mesh Stiffness, and its Modifications, on Planetary Gear Dynamics.
by:
(Electronic resources)
Hydrodynamic Simulations of Ejecta Production From Shocked Metallic Surfaces.
by:
(Electronic resources)
Nonlinear Time-varying Dynamic Modeling of Vehicle Driveline Systems with Emphasis on Hypoid Gear Excitation and Response.
by:
(Electronic resources)
Vibration and Sound Radiation Analysis of Vehicle Powertrain Systems with Right-Angle Geared Drive.
by:
(Electronic resources)
Dynamic methods for characterization of mechanical properties of nanomaterials.
by:
(Electronic resources)
Modern mathematics and mechanics = fundamentals, problems and challenges /
by:
(Electronic resources)
Adhesion Characteristics and Swelling Response of Stimuli-Responsive Hydrogels.
by:
(Electronic resources)
Experimental and Computational Investigation of the Conformal Vortex Generator.
by:
(Electronic resources)
Rheology, Mechanics and Transport in Granular Materials: A Versatile Computational Framework.
by:
(Electronic resources)
Study of Dynamics and Nanoscale Heat Transfer of Head Disk Interface in Hard Disk Drives.
by:
(Electronic resources)
Peridynamic Modeling and Impact Testing of Dynamic Damage, Fracture, and Failure Process in Fiber-Reinforced Composite Materials.
by:
(Electronic resources)
Reinventing the Wheel: Stress Analysis, Stability, and Optimization of the Bicycle Wheel.
by:
(Electronic resources)
Genetic search methods for multicriterion optimal design of viscoelastically damped structures.
by:
(Electronic resources)
Mesoscale Modeling of Defects and Phase Transformations in Crystalline Materials.
by:
(Electronic resources)
Nonlinear Response of Electronic Assemblies under Multiaxial Vibration Excitation.
by:
(Electronic resources)
Energy Materials: Modeling, Design and Applications of Electrowetting, Thermoelectric and Superconducting Materials.
by:
(Electronic resources)
Level-Set-XFEM-Density Topology Optimization of Active Structures: Methods and Applications = = Level-Set-XFEM-Dichte Topologieoptimierung von Aktiven Strukturen: Methoden und Anwendungen.
by:
(Electronic resources)
Computational and Experimental Characterization of the Behaviors of Anisotropic Quasi-Brittle Materials: Shale and Textile Composites.
by:
(Electronic resources)
Multi-Physics Computational Framework For Coupled Electric, Magnetic and Mechanical Systems Using Wavelet Transformation Based Multi Time Scaling (WATMUS).
by:
(Electronic resources)
Die Werke von Johann I und Nicolaus II Bernoulli.. Bd. 2,. Mathematik II /
by:
(Language materials, printed)
Recent advances in computational mechanics and simulations.. Volume-II,. Nano to macro
by:
(Electronic resources)
Multiscale biomechanics and tribology of inorganic and organic systems = in memory of Professor Sergey Psakhie /
by:
(Electronic resources)
Materials and strength of gas turbine parts.. Volume 1,. Materials, properties, damage, deformation and fracture models
by:
(Electronic resources)
Stability of Highly Nonlinear Structures: Snapping Shells and Elastogranular Columns.
by:
(Electronic resources)
Stochastic Dynamics and Wavelets Techniques for System Response Analysis and Diagnostics: Diverse Applications in Structural and Biomedical Engineering.
by:
(Electronic resources)
Interpolation of Rigid-body Motion and Galerkin Methods for Flexible Multibody Dynamics.
by:
(Electronic resources)
Rational and applied mechanics.. Volume 2,. Special problems and applications
by:
(Electronic resources)
Loon Copter: Modeling, Implementation, and Stability Control of a Fully-featured Aquatic-aerial Quadcopter.
by:
(Electronic resources)
Manufacture-structure-performance relationships for filament-wound composite shells.
by:
(Electronic resources)
The Power of Synchrophasors: Electric Grid Monitoring, Control and Optimization.
by:
(Electronic resources)
Design of Vibration Class Laboratory Assignments: Focusing on Broader Applicat.
by:
(Electronic resources)
Multiscale Modeling and Microuidic Study of Particle-Laden Emulsions and Foams.
by:
(Electronic resources)
Weighting Matrices and Model Order Determination in Stochastic System Identification for Civil Infrastructure Systems.
by:
(Electronic resources)
Capturing Rate-Dependent Shear Localization Using a Traction Balance Mixed Zone Closure Model and a Shear Band Insertion Mechanism.
by:
(Electronic resources)
Constitutive Modeling and Fracture Mechanics of a Self-Healing Hydrogel with Chemical and Physical Cross-Links.
by:
(Electronic resources)
Mechanisms of Longitudinal Depression Formation in Steel Continuous Casting.
by:
(Electronic resources)
Atomistically-Informed Finite Element Simulations of Phase Transformations and Fracture in Materials.
by:
(Electronic resources)
Damage Mechanics of Graphene Nanoribbons (GNRs) under Electric Current Induced Wind Forces.
by:
(Electronic resources)
Nondestructive Approach for Defect Detection in Hard Armor Protective Inserts.
by:
(Electronic resources)
Design of Metallic Nanocomposites for High-Strength, Plasticity and Fracture Resistance.
by:
(Electronic resources)
Computational Design, Simulation of Meshing, and Stress Analysis of Strain Wave Gear Drives.
by:
(Electronic resources)
Vibration-Based Damage Imaging in Structures Using High-Speed Camera with Digital Image Correlation.
by:
(Electronic resources)
Statistical Analysis and Constitutive Modeling of Crystal Plasticity Using Dislocation Dynamics Simulation Database.
by:
(Electronic resources)
Thermal and Elastic Properties of Perovskite Oxides from First Principles.
by:
(Electronic resources)
Novel Techniques for Control and Transduction of Solid-State Spin Qubits.
by:
(Electronic resources)
A New Definition and Classification of Antibody Complementarity Determining Regions: Unsupervised Learning of Protein Backbone Conformations Informs Antibody Structural Bioinformatics and Design.
by:
(Electronic resources)
Probabilistic Analysis of Aircraft Maneuvers Using Multi-Fidelity Aerodynamics Databases and Uncertainty Quantification.
by:
(Electronic resources)
The Role of Ligaments in Murine Osteoarthritic Models: Markers and Mechanics.
by:
(Electronic resources)
Additive Manufacturing of an Intervertebral Disc Repair Patch to Treat Spinal Herniation.
by:
(Electronic resources)
Internal and External Oblique Muscle Asymmetry in Sprinters and Sprint Hurdlers: a Cross-Sectional Study.
by:
(Electronic resources)
Mechanical Behavior and Characterization of SLS Processed PA-11 for PA-11/Silica Nanocomposites.
by:
(Electronic resources)
Nanomechanical Measurements of thin Crystalline Perovskite Oxide Membranes.
by:
(Electronic resources)
A Novel Diffuse-Interface Model and Numerical Methods for Compressible Turbulent Two-Phase Flows and Scalar Transport.
by:
(Electronic resources)
Structural Characterization of Iii-Nitride Semiconductors: Defect Control and Strain Management.
by:
(Electronic resources)
Numerical Investigation of Hyporheic Flows Induced by Gravel Bars and Sand Dunes.
by:
(Electronic resources)
Implementation of Ultra-High Performance Concrete in Long-Span Precast Pretensioned Structural Elements for Buildings.
by:
(Electronic resources)
Experiment-Based Simulations for Heterogeneous Hierarchical Materials: Application to Metal Additive Manufacturing.
by:
(Electronic resources)
Kinetics of Detwinning and Grain Boundary Structural Transformation in Chemical Vapor Deposited Nickel.
by:
(Electronic resources)
NONLINEAR RESPONSE AND NOISE TRANSMISSION OF DOUBLE WALL SANDWICH PANELS.
by:
(Electronic resources)
Mechanically Mediated Fatigue Failure in Articular Cartilage: Experimental, Theoretical, and Computational Models.
by:
(Electronic resources)
Deep Learning in Engineering Mechanics: Wave Propagation and Dynamics Implementations.
by:
(Electronic resources)
Analytical and Experimental Evaluation of the Effect of Knots on Rolling Shear Properties of Cross-Laminated Timber (CLT).
by:
(Electronic resources)
Graphene as a Tool to Investigate Topological Defects and Strongly Correlated Materials.
by:
(Electronic resources)
Parametric Study of An Electric Propulsion, Nuclear Thermal Reactor, Space Vehicle System.
by:
(Electronic resources)
Substructure based modeling of nickel single crystals cycled at low plastic strain amplitudes.
by:
(Electronic resources)
Testing of a New Composite Framing System for Vertical Evacuation Structures.
by:
(Electronic resources)
Hierarchical material models with microstructure for nonlinear analysis of progressive damage in laminated composite structures.
by:
(Electronic resources)
The Relationship Between Structure and Interaction in Noble Metal Phosphine Complexes.
by:
(Electronic resources)
Interactions of Organic Fluorophores with Plasmonic Surface Lattice Resonances.
by:
(Electronic resources)
Accelerating the Materials-By-Design Approach for Hairy Nanoparticle Assemblies Using Coarse-Grained Molecular Dynamics Simulations.
by:
(Electronic resources)
A First-Principles Investigation of Refractory Alloy Systems United by a Common Computational Framework.
by:
(Electronic resources)
Jumping Silicon Microrobots with Electrostatic Inchworm Motors and Energy Storing Substrate Springs.
by:
(Electronic resources)
An Investigation into the Sensitivity of Differential Ratings of Perceived Exertion (dRpe) as a Tool to Measure Internal Training Load in Team Sport Players.
by:
(Electronic resources)
Continuum Mechanical Models for Design and Characterization of Soft Robots.
by:
(Electronic resources)
Study of In-Plane Mechanical Behavior of Bio-Inspired Hierarchical Honeycombs.
by:
(Electronic resources)
Finite Element Studies of Orthogonal Machining of Aluminum Alloy A2024-T351.
by:
(Electronic resources)
Uncertainty Quantification and Risk Analysis of Earthquake Soil Structure Interacting System.
by:
(Electronic resources)
Leveraging Biomimicry and Additive Manufacturing to Improve Load Transfer in Brittle Materials.
by:
(Electronic resources)
Evaluation of scientific sources in mechanics = Heiberg's Prolegomena to the works of Archimedes and Hellinger's Encyclopedia article on continuum mechanics /
by:
(Electronic resources)
Engineering pedagogy = a collection of articles in honor of Prof. Amitabha Ghosh /
by:
(Electronic resources)
Material Failure Simulation with Random Microstructure Using Lattice Particle Method and Neural Network.
by:
(Electronic resources)
Plate Shear Buckling: Mechanics and Enhancements Using Low-Frequency Sinusoids.
by:
(Electronic resources)
Micromorphic Continuum Model: Granular Materials to Designed Granular Metamaterials.
by:
(Electronic resources)
Leveraging Polymer-water Interactions for Damage Detection in Polymer Composites.
by:
(Electronic resources)
Modeling Lifetime Performance of Ceramic Matrix Composites with Reduced Order Homogenization Multiscale Methods.
by:
(Electronic resources)
Active-passive hybrid structural control: An enhanced active constrained layer damping treatment with edge elements.
by:
(Electronic resources)
Mesoscale Structural and Mechanical Simulations of Cross-Linked Carbon Nanotube Materials.
by:
(Electronic resources)
Parametric Design and Experimental Validation of Conjugate Stress Sensors for Structural Health Monitoring.
by:
(Electronic resources)
Ultrasonic Locating and Tracking of Small Particles for Biomedical Applications.
by:
(Electronic resources)
Long-Time Behavior of the International Trade Equation and Average Gromov Hyperbolicity.
by:
(Electronic resources)
Nano-Mechanical Testing of Colloidal Nanostructures and Self-Assembled Films.
by:
(Electronic resources)
Design, Fabrication and Integration of Large-scale Stretchable Strain Sensor Networks.
by:
(Electronic resources)
Improving the Sensitivity and Analytical Power of Electrically Detected Magnetic Resonance Through Hardware and Software.
by:
(Electronic resources)
Toughening of Boron Carbide Composites with Hierarchical Microstructuring.
by:
(Electronic resources)
Transition Metal-Mediated Selective Functionalizations of Bio-Derived Building Blocks.
by:
(Electronic resources)
Aerogel-Based Plasters for Renovation of Buildings in Sweden: Identification of Possibilities, Information Deficiencies and Challenges.
by:
(Electronic resources)
APPLICATIONS OF INTEGRAL EQUATIONS WITH STRONG SINGULARITIES IN FRACTURE MECHANICS (FINITE-PART, THREE-DIMENSIONAL, CRACK).
by:
(Electronic resources)
Prediction of Tensile Behaviors of L-Ded 316 Stainless Steel Parts Using Machine Learning.
by:
(Electronic resources)
Affective Dramaturgies in Contemporary Dance Leaky Encounters and Turbulent Spectating.
by:
(Electronic resources)
Functionality of ti Surfaces: Tribocorrosion of Titanium Samples Anodized and Biomodified = = Funcionalidade de Superficies de ti: Tribocorrosao de Amostras de Titanio Anodizadas e Biomodificadas .
by:
(Electronic resources)
Modelling of an Impact Resistant Navigation System for Gun Projectiles Based on Low Cost Mems Sensors = = Dusuk Maliyetli Mems Sensorlu Top Mermileri Icin Darbe Dayanimli Navigasyon Sistemi Modellemesi.
by:
(Electronic resources)
Multi-Mode Quasi-Static Loading and Interface Reduction to Model Joint Nonlinearity.
by:
(Electronic resources)
Virtual Part Qualification with Thermal, Mechanical, and Microstructural Modeling of Additive Manufacturing.
by:
(Electronic resources)
Engineering Better Treatments for Diabetes: From Next-Gen Insulin Drugs to Autonomous Insulin Delivery.
by:
(Electronic resources)
Out of Many, One: Distilling the Physics of Behavior Across Scales for an Animal Without a Brain.
by:
(Electronic resources)
Solar Torque and Dissipation Dynamics for Tumbling Bodies: Theory and Observations.
by:
(Electronic resources)
Stress Corrosion Cracking of Austenitic Stainless Steel Rebar in Simulated Concrete Pore Solution Influenced by Strain-Induced Martensitic Transformation.
by:
(Electronic resources)
Laser Based Powder Bed Fusion of Plain Carbon and Low-Alloy Steels: Microstructure and Processability.
by:
(Electronic resources)
PLASTIC FLOW AND FRACTURE BEHAVIOR OF DUCTILE MATERIALS INCORPORATING VOID NUCLEATION, GROWTH, AND INTERACTION.
by:
(Electronic resources)
Functionality Through Multistability: From Deployable Structures to Soft Robots.
by:
(Electronic resources)
Phosphorus and Oxygen Dynamics between Fall and Spring Turnover Events in a Small Canadian Shield Lake.
by:
(Electronic resources)
Investigation of Under-Actuated Reconfigurable Structures Under Manipulation Environments.
by:
(Electronic resources)
Bioinspired Surgical Needle Insertion Mechanics in Soft Tissues for Percutaneous Procedures.
by:
(Electronic resources)
On the Poromechanics of Anisotropic Elastoplastic Geomaterials with Compressible Grains.
by:
(Electronic resources)
Modern Programming Models for Gpu-Accelerated Heterogeneous Supercomputers: Computational Fluid Dynamics and in Situ Data Compression.
by:
(Electronic resources)
Colloidal Physics Modeling of Biomolecular Behavior to Enable Cell Building.
by:
(Electronic resources)
Projection-Based Model Order Reduction for Model Predictive Control of a Descending Aircraft.
by:
(Electronic resources)
Molecular Modeling of Mechanically Reliable Hybrid Organosilicate Materials.
by:
(Electronic resources)
Data-Driven and Physics-Constrained Uncertainty Quantification for Turbulence Models.
by:
(Electronic resources)
A Predictive Simulation Framework for Buoyancy-Driven Natural Ventilation in Office Buildings.
by:
(Electronic resources)
A Lagrangian-Eulerian Simulation Method for Viscoelastic Flows Applied to Adhesive Joining.
by:
(Electronic resources)
Investigating Microstructural Effects on Hall-Petch Relationship of Mg-4Al Alloy
by:
(Electronic resources)
Crisis Transmitting Effects Detection and Early Warning Systems Development for China's Financial Markets.
by:
(Electronic resources)
Design and Characterization of Anisotropic Foams from Lignocellulosic Biomass.
by:
(Electronic resources)
Bilayer Chitosan/zein Based Nanofibers for Antimicrobial Wound Dressing Application = = Antimikrobiyal yara ortusu uygulamalarina yonelik cift tabakali kitosan/zein temelli nanoelyaflar.
by:
(Electronic resources)
Transient Dynamic Analysis of Modified Hopkinson Pressure Bar System for High Strain Rate Tensile Testing.
by:
(Electronic resources)
An Over-Actuated Multi-Rotor Aerial Platform and Iterative Learning Control Applications.
by:
(Electronic resources)
Improving Rock Pillar Stability Guidelines Through Detailed Numerical Investigation.
by:
(Electronic resources)
An Experimental Study towards Underwater Propulsion System Using Structure Borne Traveling Waves.
by:
(Electronic resources)
Data-Driven Modeling of Multiaxial Fatigue of Structures in Frequency Domain.
by:
(Electronic resources)
The Effects of Bioinspired Infill Designs and Density on the Compressive Strength of Parts Produced by Additive Manufacturing via Fused Deposition Modeling.
by:
(Electronic resources)
Design, Synthesis, and Optimization of Additively Manufactured Functional Ceramics and Its Composites.
by:
(Electronic resources)
Seismic Demands in Reinforced Concrete Wall Buildings with Coupling slabs = = Demandas Sismicas en Edificios de Muros de Hormigon Armado Con Losas de Acoplamiento.
by:
(Electronic resources)
Rapid Stochastic Response Estimation of Dynamic Nonlinear Structures : = Innovative Frameworks and Applications.
by:
(Electronic resources)
Precision Maritime Landing of Autonomous Multirotor Aircraft with Real-time Kinematic GNSS.
by:
(Electronic resources)
Deformation Mechanisms and Load Distribution in Multi-Phase Engineering Materials.
by:
(Electronic resources)
Dislocation Dynamics in Chemically and Microstructurally Complex Metallic Materials.
by:
(Electronic resources)
Buckling of Spherical Shells with Large Axisymmetric Imperfection and Application in Soft Robotics.
by:
(Electronic resources)
The Dynamic Interplay between Submesoscales and Boundary Layer Turbulence.
by:
(Electronic resources)
Design and Optimization of Shaft Bracket of Drum Brake for Heavy Duty Vehicle = = Agir Hizmet Araclari Icin Kampanali Fren Mil Braketi Tasarimi ve Optimizasyonu.
by:
(Electronic resources)
The Effect of Deformation Rate on the Damage Tolerances of Nomex Honeycomb Cored Composite Sandwiches = = Nomex bal Petegi Dolgulu Kompozit Sandviclerde Deformasyon Hizinin Hasar Toleransina Etkisi.
by:
(Electronic resources)
Structural Behavior of Hybrid Fiber Reinforced Concrete Panels Under Blast Loads = = Hibrit Fiberli Beton Panellerin Patlama Yuku Altinda Yapisal Davranislari.
by:
(Electronic resources)
A Practical Finite Element Model of TSADWA Type Semi-Rigid Connections for Push-Over Analysis of Steel Frames in SAP2000 = = Celik Cercevelerin SAP2000'de Itme Analizi Icin Uakgck Tipi Yari Rijit Baglantilarin Pratik bir Sonlu Eleman Modeli.
by:
(Electronic resources)
Experimental Study of Sheet Pile Retaining Walls with Granulated Rubber Reinforced Backfill = = Granul Kaucuk Takviyeli Dolguya Sahip Palplans Istinat Duvarlarinin Deneysel Calismasi.
by:
(Electronic resources)
Aerodynamic Performance of a Biologically Inspired Hybrid Plasma-Mechanical Flow Control and Sensing Device.
by:
(Electronic resources)
Imagination-Augmented Deep Reinforcement Learning for Robotic Applications.
by:
(Electronic resources)
Development of Self-Healing Sustainable Concrete Using Recycled Materials.
by:
(Electronic resources)
Graphite Doped PAN Nanofiber Mats Infused Polymer Composite Pipeliners : = Experimental Diffusion Characterization.
by:
(Electronic resources)
The Repeatability of Additively Manufactured 17% Chromium - 4% Nickel Precipitation Hardened Stainless Steel : = Component Qualification Methodology.
by:
(Electronic resources)
Erosion Control of Steep Open Channels Using Articulated Concrete Blocks.
by:
(Electronic resources)
Managed Aquifer Recharge with Marginal Water for Irrigation and Contaminant Attenuation.
by:
(Electronic resources)
Development of Methods for Surface Modification of Semiconductor Photocatalysts and Biopolymers for Applications in Water Treatment and 3D Printing.
by:
(Electronic resources)
Aspects of the Bed Geometry and Flow in Meandering Streams at Incipient and Later Stages.
by:
(Electronic resources)
Simulations of Coastal Currents, Transport and Population Connectivity of Blue Mussel (Mytilus Edulis) in the Gulf of Maine.
by:
(Electronic resources)
Wind Sensing and Rejection for Agile Fixed-Wing Unmanned Aerial Vehicles.
by:
(Electronic resources)
Enhancing Performance of Gravity Driven Membranes for Water Purification in Small Rural Communities.
by:
(Electronic resources)
Reliability Analysis of Overhead Transmission Line Multilayered Stranded Conductor/Clamp Assemblies for Fretting Fatigue Failure.
by:
(Electronic resources)
Review of Innovative Rehabilitation Techniques for Reinforced Concrete Buildings.
by:
(Electronic resources)
Investigation of Ultra-Thin Dielectrics on Coupled Capacitive and Inductive Effects in Laterally Conducting Power Device Packaging.
by:
(Electronic resources)
Petroleum geomechanics characterization using coupled numerical modeling and soft computing.
by:
(Electronic resources)
Integrated Modelling and Testing of Engineering Structures : = A Validation Approach for Multi-Physics Simulations.
by:
(Electronic resources)
How Curved Creases Enhance the Stiffness and Enable Shape Morphing of Thin-Sheet Structures.
by:
(Electronic resources)
The Determinants for Continuance Intention in Mobile Fitness Apps Adopting a Gamification Approach.
by:
(Electronic resources)
Quasi-Static Crushing Behavior of Nomex® Honeycomb Filled Thin-Walled Aluminum Tubes = = Nomex® Balpetegi̇ ILe Doldurulmus INce Duvarli Alumi̇nyum Tupleri̇n Yari Stati̇k Ezi̇lme Davranislari .
by:
(Electronic resources)
Towards Certification by Analysis : = Large-Eddy Simulations of Commercial Aircraft Across the Flight Envelope.
by:
(Electronic resources)
Complex Games and Game Design as a Vehicle for Technical & Critical Learning.
by:
(Electronic resources)
Quantification of Reynolds-Averaged-Navier-Stokes Model Structural Hypothesis Uncertainty in Transitional Boundary Layer and Airfoil Flows.
by:
(Electronic resources)
Supporting the Design of Automated Guided Vehicle Systems in Internal Logistics.
by:
(Electronic resources)
Design and Validation of an Open-Source 3D Printable Bioreactor System for Ex Vivo Bone Culture.
by:
(Electronic resources)
Design and Development of a Low-Cost, Long-Range Tractor Vtol Uav for Payload Deliveries.
by:
(Electronic resources)
Design and Development of Six-Component Platform Type Wind Tunnel Balance Incorporating Optical Fibre and Strain Gauge Sensors.
by:
(Electronic resources)
Digital Shaping : = Meshless Computational Methods for Form Generation in Architectural Design.
by:
(Electronic resources)
Applying Machine Learning Algorithms in the Design and Manufacturing Process of Bioinspired Architectured Materials.
by:
(Electronic resources)
Teaching Mathematics for Conceptual Understanding : = An Examination of Elementary and Secondary Teacher Candidates.
by:
(Electronic resources)
Fabrication and Characterization of DNA Templated Electronic Nanomaterials and Their Directed Placement by Self-Assembly of Block Copolymers.
by:
(Electronic resources)
Reformulated Vortex Particle Method and Meshless Large Eddy Simulation of Multirotor Aircraft.
by:
(Electronic resources)
An Evaluation of Coaching and Training Practices in Mixed Martial Arts : = A Mixed Methods Approach.
by:
(Electronic resources)
Permanent Magnets and Electromechanical Control Systems for Spectroscopy and Low Field Communication.
by:
(Electronic resources)
Synchronization in Coupled Opto-Thermal Silicon Mems Limit Cycle Oscillators.
by:
(Electronic resources)
Effects of Polymer Rheology on Meltblowing Fiber Formation Process and Fiber Diameter Distribution.
by:
(Electronic resources)
Atomistic Simulation Studies of Thin Film Growth and Plastic Deformation in Metals and Metal/Ceramic Nanostructures.
by:
(Electronic resources)
FE Analysis of the Drop-weight Impact on 3D Orthogonal Woven Fabric Reinforced Composite.
by:
(Electronic resources)
Computational Modeling and Design of Mechanical Metamaterials : = A Machine Learning Approach.
by:
(Electronic resources)
Computational Method for Aerodynamic and Aeromechanical Analysis of Offshore Wind Turbines.
by:
(Electronic resources)
Clustering Approaches for Faster Nonlinear Projection-Based Model Order Reduction.
by:
(Electronic resources)
Simpler, Faster, and Softer : = Towards Broad Application of Laser Speckle Imaging in Art Conservation and Soft Matter.
by:
(Electronic resources)
Feature Recognition and Strength Estimation of Chain Links Using 3D Inspection Data for Mooring Integrity Assessment.
by:
(Electronic resources)
Surface Deformation Constraints on Slow Fault Slip Behaviour During Shallow Continental Seismic Swarms.
by:
(Electronic resources)
Propeller Design and Optimization Using a Robust Genetic Algorithm and a Computationally Efficient Solver.
by:
(Electronic resources)
Development of Thermoplastic Composite External Reinforcing of Concrete Decking System.
by:
(Electronic resources)
Exploring Structure-Function Relationships in Knee Cartilage and Meniscus Using Medical Imaging and Soft Tissue Biomechanics Techniques.
by:
(Electronic resources)
Error Analysis and Characterization of Piezoresistive Array Touch Sensors = = Piezodirencli Sira Dizilimli Dokunma Algilayicilarinin Hata Analizi ve Karakterizasyonu.
by:
(Electronic resources)
Elektronik Atiklardan Degerli Metal Geri Kazanimi = = The Recycling of Precious Metals from Elecronic Waste.
by:
(Electronic resources)
Synthesis and Characterization of Carbon Sequestering Calcium Carbonate Cement.
by:
(Electronic resources)
New Developments on the Bending Resistance in Composite Slabs with Steel Deck Under Fire.
by:
(Electronic resources)
Development of three-dimensional spherical discontinuous deformation analysis for granular materials.
by:
(Electronic resources)
Enabling Energy Efficiency in Connected and Automated Vehicles Through Predictive Control Techniques.
by:
(Electronic resources)
Application of the Machine Learning Tools in the Integrity Management of Pipelines Containing Dent-Gouges and Corrosions.
by:
(Electronic resources)
The Neurophysiological Correlates of Choice on Engagement, Motivation, and Motor Skill Learning.
by:
(Electronic resources)
A Reproducing Kernel Particle Method Framework for Modeling Failure of Structures Subjected to Blast Loadings.
by:
(Electronic resources)
On the Inherently Nonlinear Dynamics of Unilateral Contact in Elastic Structures.
by:
(Electronic resources)
The Miniaturization of Vision-Based Tactile Sensor : = Design, Fabrication and Robotic Applications.
by:
(Electronic resources)
Algebraic equations of linear elasticity = novel force-based methods for solid mechanics with MATLAB® /
by:
(Electronic resources)
The fundamentals of newtonian mechanics = for an introductory approach to modern physics /
by:
(Electronic resources)
Spacetime geometry of relativity : = extending Pythagorean Theorem /
by:
(Language materials, printed)
The Tensile Behavior, Fracture, and Power Harvesting Potential of Nickel-Manganese-Gallium Magnetic Shape Memory Alloys.
by:
(Electronic resources)
Addressing Stiffness-Induced Challenges in Modeling and Identification for Rigid-Body Systems With Friction and Impacts.
by:
(Electronic resources)
Behavior of RC Beam-Column Connections Strengthened with Externally Bonded FRP Composites.
by:
(Electronic resources)
Flow Physics of Radiatively Heated Particle-Laden Channel Flow and Simulation Methods for Shock-Driven Problems in Materials with Strength /
by:
(Electronic resources)
Direct Numerical Simulations of Wave-Current Interactions Over Bumpy Walls /
by:
(Electronic resources)
A Discrete Adjoint Framework for Turbulent Hypersonic Flows in Thermochemical Nonequilibrium /
by:
(Electronic resources)
Study of Wall-Bounded Turbulent Heat Transfer and Flow Dynamics at Transcritical Conditions /
by:
(Electronic resources)
Deep Learning Algorithms for Computational Mechanics on Irregular Geometries /
by:
(Electronic resources)
Computation of Wall-Bounded Flows Using a New Universal Velocity Profile /
by:
(Electronic resources)
Shape and shape changes in mechanics = the mechanical and thermal gradient theories /
by:
(Electronic resources)
Classical mechanics = from particles to continua and regularity to chaos /
by:
(Electronic resources)
Predicting Fatigue Indicator Parameters in Additively Manufactured IN625 Using Genetic Programming for Symbolic Regression.
by:
(Electronic resources)
Fatigue Crack Growth, Creep-Fatigue Crack Growth and Creep Crack Growth Behavior of Inconel® 740H at Elevated Temperature.
by:
(Electronic resources)
A Holistic Study on Flow and Thermal Characteristics of Non- Stochastic Strut-Based and Surface-Based Lattice Structures for Gas Turbine Engines.
by:
(Electronic resources)
Electro-Chemo-Mechanics of Solids : = Application to All-Solid-State Batteries, Polyelectrolyte Gels, and Actuators.
by:
(Electronic resources)
The Association of Tissue Architecture Changes & Metabolic Heterogeneity in Epithelial Cancer Cells = = L'association des Modifications de L'architecture Tissulaire Et de L'heterogeneite Metabolique Dans Les Cellules Epitheliales Cancereuses.
by:
(Electronic resources)
Continuum Dislocation Dynamics Modeling of Mesoscale Crystal Plasticity at Finite Deformation.
by:
(Electronic resources)
Surface Chemistry Control of 2D Nanomaterial Morphologies, Optoelecronic Responses, and Physicochemical Properties.
by:
(Electronic resources)
"A Crash of Worlds" : = How Red Dead Redemption II Creates a World Where Players Experience Empathy through Character Performance.
by:
(Electronic resources)
Poly(Lactic Acid) Block Copolymers : = Synthesis, Characterization, and Structure-Property Relationships = Polymilchsaure-Blockcopolymere.
by:
(Electronic resources)
Mechanics and Mechanisms of Fracture for an Eastern Spruce Subject to Transverse Loading Using Acoustic Emission.
by:
(Electronic resources)
Finite Element Analysis of Reinforced Concrete Slab-column Connections for Seismic Performance Investigation.
by:
(Electronic resources)
3D Printing Assisted Development of Bioinspired Structure and Device for Advanced Engineering.
by:
(Electronic resources)
Dimensionality Reduction of Embedded Boundary Models for Nonlinear Fluid-Structure Interaction.
by:
(Electronic resources)
Development, Mechanical Behaviour and Impact Resistance of Sustainable Steel Fibre-Reinforced Dry Ultra-High Performance Concrete (DUHPC).
by:
(Electronic resources)
Delamination and Fatigue Analysis of Silicon Solar Cells Using Finite Element Method.
by:
(Electronic resources)
3D in Situ Chemical Synthesis: Additive Manufacturing of Functional Polymeric Materials Via Vat Photo-Polymerization.
by:
(Electronic resources)
A Study of Nonlinear Deformations and Defects in the Actuation of Soft Membranes, Rupture Dynamics, and Mesoscale Plasticity.
by:
(Electronic resources)
Advances in Discrete Optimization: From Truss Design Optimization to Quantum Computing Optimization.
by:
(Electronic resources)
Investigation of Gas Metal Arc Welding as a Potential Method for Additive Manufacturing of Magnesium Alloys.
by:
(Electronic resources)
A Comprehensive Study of Guaranteed Minimum Maturity Benefit and Guaranteed Minimum Death Benefit Under Regime-Switching Models.
by:
(Electronic resources)
Shaking table scale model tests of nonlinear soil-pile-superstructure interaction in soft clay /
by:
(Electronic resources)
Understanding Video Game Developer Intention Versus Outcome as it Pertains to Audience Experience with Game Narrative.
by:
(Electronic resources)
The Characterization of Haliotis Rufescens (Red Abalone): Mesolayer Growth.
by:
(Electronic resources)
The Investigation of Haliotis Rufescens (Red Abalone): Mesolayer Growth & Mechanical Behavior.
by:
(Electronic resources)
Characterization of the Widescale Reversible Sliding Mechanism in California Red Abalone Nacre Structure.
by:
(Electronic resources)
Turbulence Model Development for Hypersonic Shock Wave Boundary Layer Interactions.
by:
(Electronic resources)
Development, Experimental Validation, and Progressive Failure Modeling of an Ultra-Thin High Stiffness Deployable Composite Boom for In-Space Applications.
by:
(Electronic resources)
Flow Past a Cylinder: Development of a Surface-Mounted Flow Separation Sensor and Lock-in of Vortex Shedding from a Cylinder Undergoing Prescribed Motions.
by:
(Electronic resources)
Efficient Sequential Sampling for Neural Network-Based Surrogate Modeling.
by:
(Electronic resources)
Experimental and Computational Investigation of the Progression of Damage in 3d Orthogonal Composites.
by:
(Electronic resources)
Fundamental Evaluation of Non-Wood Fibers to Enhance Their Utilization in the Pulp and Paper Industry.
by:
(Electronic resources)
Effect of Asthma-Copd Overlap Compared to Copd on Cardiopulmonary Exercise Test Outcomes: Insights from the CanCold Study.
by:
(Electronic resources)
The Study of the Effect of Microcontrations in the Separation of Blood Cells: Soft Lithography and Micromilling.
by:
(Electronic resources)
Aluminum Scandium Nitride (AlScN) Films for Microelectromechanical Systems (MEMS).
by:
(Electronic resources)
Manipulating Game Design Elements to Explore the Influence of Difficulty on Videogame Experiences.
by:
(Electronic resources)
The Suitability of Biochar From Non-Lignocellulosic Feedstocks as Potential Bio-Based Reinforcing Fillers in Rubber Composites.
by:
(Electronic resources)
Seismic Assessment of Low-Rise Existing Infilled Steel Frames Under Earthquake Sequences Using Machine Learning-based Fragility Analysis.
by:
(Electronic resources)
Knitted Architecture and Wind: Designing Loosely Fitted Architectural Textiles for Interaction with Wind.
by:
(Electronic resources)
Global and Local Sensitivity-Based Design of Robust Precision Motion Controllers.
by:
(Electronic resources)
Optimal Motion Strategies with Logic-Based Constraints for Ocean Vehicles.
by:
(Electronic resources)
Quantifying Salt Marsh Resilience to Anthropogenic Disturbance and Climate Change: An Integrated Field and Numerical Investigation.
by:
(Electronic resources)
Multiscale Structural Optimization for Applications in Thermal Stability and Actuation.
by:
(Electronic resources)
Full-Scale Mechanistic and Performance Investigation of a Flexible Pavement with a Stabilized Foundation.
by:
(Electronic resources)
Attitude Determination and Control Hardware Testing and System Level Testing for Maritime Monitoring MicroSatellite.
by:
(Electronic resources)
On the Applications of Signed Distance Fields to Spacecraft Trajectory Design and Station Keeping.
by:
(Electronic resources)
Engineered Damping: From Mitigating Impacts Through Hierarchical Structured Materials to Enhancing Actuation Forces via Non-Hermitian Metamaterials.
by:
(Electronic resources)
Numerical Modeling of Wave-and Current-Supported Turbidity Currents Over Erodible Bed.
by:
(Electronic resources)
Impact of Pyrolyzed Soybean Hull Filler Interactions on High Density Polyethylene and Nylon-6 Composites.
by:
(Electronic resources)
Enhanced Computational Homogenization and Phase-Field Fracture Approaches for Polymer Nano-Composites = = Erweiterte numerische Homogenisierungsund Phasenfeld-Bruch-Ansatze furPolymer-Nanokomposite.
by:
(Electronic resources)
Fiber Optic Fabry-Perot Interferometric Sensor for Temperature and Strain Measurement.
by:
(Electronic resources)
Natural Ionic Liquids and Their Incorporation Into Quasi-solid Polymer Electrolytes and Supercapacitors.
by:
(Electronic resources)
Exploring Advanced Topological Metamaterials for Elastic Wave Manipulation.
by:
(Electronic resources)
Show more
Fewer
Subjects