東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Finite Strain Micromorphic Elasticit...

Shahabi, Farhad.

FindBook

Google Book

Amazon

博客來

Finite Strain Micromorphic Elasticity, Elastoplasticity, and Dynamics for Multiscale Finite Element Analysis.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Finite Strain Micromorphic Elasticity, Elastoplasticity, and Dynamics for Multiscale Finite Element Analysis./
作者:	Shahabi, Farhad.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	202 p.
附註:	Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.
Contained By:	Dissertation Abstracts International78-10B(E).
標題:	Mechanics. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10271180
ISBN:	9781369785623

Finite Strain Micromorphic Elasticity, Elastoplasticity, and Dynamics for Multiscale Finite Element Analysis.
Shahabi, Farhad.

Finite Strain Micromorphic Elasticity, Elastoplasticity, and Dynamics for Multiscale Finite Element Analysis. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 202 p.

Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.

Thesis (Ph.D.)--University of Colorado at Boulder, 2017.

This study stands as an attempt to consider the micro-structure of materials in a continuum framework by the aid of micromorphic continuum theory in the sense of Eringen. Since classical continuum mechanics do not account for the micro-structural characteristics of materials, they cannot be used to address the macroscopic mechanical response of all micro-structured materials. In the "representative volume element (RVE)" based methods, classical continuum mechanics may be applied to analyze mechanical deformation and stresses of materials at the relevant micro-structural length-scale (such as grains of a polycrystalline metal, or sand, or metal matrix composite, etc), but when applying standard homogenization methods, such lower length scale effects get smeared out at the continuum scale. The micromorphic continuum theory provides the ability to incorporate the micro-structural effects into the macroscopic mechanical behavior. Therefore, the micromorphic continuum is a tool for a higher resolution multi-scale material modeling through capturing the material's micro-structural physics via bridging to the direct numerical simulations (DNS) at the lower length scale. In the micromorphic continuum theory of Eringen, the fundamental assumption is that the material is made of "micro-elements" in such a way that the classical continuum mechanics balance equations and thermodynamics are valid within a micro-element. Note that micro-elements represent the material's micro-structure in a micromorphic continuum. The micro-element deformation with respect to the centroid of a macroscopic continuum point is governed by an independent micro-deformation tensor chi which adds 9 additional degrees of freedom to the continuum model. The micromorphic additional degrees of freedom represent micro-stretch, micro-shear, and micro-rotation of the micro-elements. The macroscopic deformation (macro-element deformation) in the micromorphic continuum is handled through the deformation gradient tensor F. If the hypothesis of micromorphic continuum works, in a multi-scale modeling framework, assuming proper constitutive models can be formulated, and material parameters calibrated, micromorphic continuum theory may fill the gap between the RVE-micro-structural-length-scale models and the macroscopic continuum scale. The advantage of using micromorphic continuum is that it provides a chance of linking the macroscopic model to the lower length scale simulations (DNS) and reducing the computational cost by switching from DNS to the macro-scale finite element analysis or other numerical methods at the continuum scale. The linking is done through defining the overlap coupling region between the lower length scale analysis and micromorphic continuum to calibrate the material parameters and the micromorphic continuum model degrees of freedom. Therefore, in the framework of multi-scale modeling, micromorphic continuum can be used as a filter on top of the DNS simulations to capture underlying length scale and better inform the macroscopic model. This is done through the direct linking of the micromorphic continuum micro-elements to the material's micro-structure. The focus of this research is mainly on discussing the macroscopic mechanical behavior of micro-structured materials from the perspective of micromorphic continuum. This is done via developing a three dimensional finite strain finite element model for micromorphic elasticity, elastoplasticity and dynamics.

ISBN: 9781369785623Subjects--Topical Terms:

525881
Mechanics.

Finite Strain Micromorphic Elasticity, Elastoplasticity, and Dynamics for Multiscale Finite Element Analysis.
LDR:04487nmm a2200301 4500 001 2154319
005 20180330125240.5
008 190424s2017 ||||||||||||||||| ||eng d
020 $a 9781369785623
035 $a (MiAaPQ)AAI10271180
035 $a (MiAaPQ)colorado:14829
035 $a AAI10271180
040 $a MiAaPQ $c MiAaPQ
100 1 $a Shahabi, Farhad. $3 3342045
245 1 0 $a Finite Strain Micromorphic Elasticity, Elastoplasticity, and Dynamics for Multiscale Finite Element Analysis.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 202 p.
500 $a Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.
500 $a Adviser: Richard A. Regueiro.
502 $a Thesis (Ph.D.)--University of Colorado at Boulder, 2017.
520 $a This study stands as an attempt to consider the micro-structure of materials in a continuum framework by the aid of micromorphic continuum theory in the sense of Eringen. Since classical continuum mechanics do not account for the micro-structural characteristics of materials, they cannot be used to address the macroscopic mechanical response of all micro-structured materials. In the "representative volume element (RVE)" based methods, classical continuum mechanics may be applied to analyze mechanical deformation and stresses of materials at the relevant micro-structural length-scale (such as grains of a polycrystalline metal, or sand, or metal matrix composite, etc), but when applying standard homogenization methods, such lower length scale effects get smeared out at the continuum scale. The micromorphic continuum theory provides the ability to incorporate the micro-structural effects into the macroscopic mechanical behavior. Therefore, the micromorphic continuum is a tool for a higher resolution multi-scale material modeling through capturing the material's micro-structural physics via bridging to the direct numerical simulations (DNS) at the lower length scale. In the micromorphic continuum theory of Eringen, the fundamental assumption is that the material is made of "micro-elements" in such a way that the classical continuum mechanics balance equations and thermodynamics are valid within a micro-element. Note that micro-elements represent the material's micro-structure in a micromorphic continuum. The micro-element deformation with respect to the centroid of a macroscopic continuum point is governed by an independent micro-deformation tensor chi which adds 9 additional degrees of freedom to the continuum model. The micromorphic additional degrees of freedom represent micro-stretch, micro-shear, and micro-rotation of the micro-elements. The macroscopic deformation (macro-element deformation) in the micromorphic continuum is handled through the deformation gradient tensor F. If the hypothesis of micromorphic continuum works, in a multi-scale modeling framework, assuming proper constitutive models can be formulated, and material parameters calibrated, micromorphic continuum theory may fill the gap between the RVE-micro-structural-length-scale models and the macroscopic continuum scale. The advantage of using micromorphic continuum is that it provides a chance of linking the macroscopic model to the lower length scale simulations (DNS) and reducing the computational cost by switching from DNS to the macro-scale finite element analysis or other numerical methods at the continuum scale. The linking is done through defining the overlap coupling region between the lower length scale analysis and micromorphic continuum to calibrate the material parameters and the micromorphic continuum model degrees of freedom. Therefore, in the framework of multi-scale modeling, micromorphic continuum can be used as a filter on top of the DNS simulations to capture underlying length scale and better inform the macroscopic model. This is done through the direct linking of the micromorphic continuum micro-elements to the material's micro-structure. The focus of this research is mainly on discussing the macroscopic mechanical behavior of micro-structured materials from the perspective of micromorphic continuum. This is done via developing a three dimensional finite strain finite element model for micromorphic elasticity, elastoplasticity and dynamics.
590 $a School code: 0051.
650 4 $a Mechanics. $3 525881
650 4 $a Mechanical engineering. $3 649730
690 $a 0346
690 $a 0548
710 2 $a University of Colorado at Boulder. $b Civil Engineering. $3 1021890
773 0 $t Dissertation Abstracts International $g 78-10B(E).
790 $a 0051
791 $a Ph.D.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10271180