東華大學圖書館 |

Two Enabling Developments for Computational Contact Mechanics.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Two Enabling Developments for Computational Contact Mechanics./
作者:	Chauda, Gaurav.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2021,
面頁冊數:	156 p.
附註:	Source: Dissertations Abstracts International, Volume: 83-03, Section: B.
Contained By:	Dissertations Abstracts International83-03B.
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28719730
ISBN:	9798538169085

Two Enabling Developments for Computational Contact Mechanics.
Chauda, Gaurav.

Two Enabling Developments for Computational Contact Mechanics. - Ann Arbor : ProQuest Dissertations & Theses, 2021 - 156 p.

Source: Dissertations Abstracts International, Volume: 83-03, Section: B.

Thesis (Ph.D.Eng.)--Michigan State University, 2021.

This item is not available from ProQuest Dissertations & Theses.

Two approaches for computational contact mechanics are explored to provide an accurate and robust numerical simulation of frictional contact. First, a novel quasi-static contact algorithm (Method of First Violation) is developed, which provides a solution over the load history that is admissible in the sense that all equality and inequality constraints are satisfied at each load step and every point between load steps. The central idea of this algorithm is to calculate each load increment to be exactly which is necessary to cause the first nodal inequality constraint to be violated. At the end ofthat load increment, the status of the associated node is switched to a different status (such as from contact to non-contact) where the inequality constraint is replaced with an equality constraint, and a new inequality constraint is introduced. Importantly, the constraints of the previous and the new node status are simultaneously satisfiedat that point in the loading cycle.The Method of First Violation (MFV) algorithm is illustrated using a compliance formulation for degrees of freedom on the surface of a half-plane loaded by a rigid indenter with friction. The compliance formulation permits considering only the degrees of freedom in the vicinity of contact, therefore extremely fine surface discretization is possible using only a modest number of degrees of freedom. Because this contact problem has been well studied using analytic techniques and because of the extremely fine mesh resolution, it is possible to perform a critical comparison with analytical solutions.An added benefit of this algorithm is its greatly improved robustness. This indenter/half-plane discretization was also used to test MFV where friction was represented by a two-parameter (static and kinematic) model. Though such problems are notoriously ill-conditioned, the MFV remained robust. It was also used to explore a problem involving the Dahl friction model.Second, a compliance matrix formulation is derived for a two-dimensional elastic disk and for a hole in an infinite elastic plane. The circular disk/hole surface is discretized finely with a uniform distribution of nodes and a set of basis functions for traction are defined so that each basis function has a value of 1 in the vicinity of the corresponding node and a value of zero elsewhere. The surface displacement field associated with each traction basis function is obtained through a laborious derivation involving Fourier series and terms of the Michell's Airy stress function. The compliance matrix is constructed using the calculated displacement fields evaluated at each node. Fortunately, one may restrict attention to only the tractions and displacements in the vicinity of contact because all surface tractions outside that region are zero so the resulting compliance matrix is of tractable size. This semianalytical formulation provides a direct construction of a compliance matrix with an extremely fine surface discretization, easy implementation of friction models, andaccommodation of elastic coupling.The Method of First Violation and the compliance formulation of two-dimensional circular bodies are implemented together to numerically simulate multiple contact problems. Five different geometries are designed using cylinders, holes, and half-plane, where two contacting bodies are pressed against each other and then sheared cyclically for four cycles. Surface tractions, stick ratios, steady-state dissipation, and error in surface tractions are calculated using Goodman decoupling and full decoupling approximations. The results are compared with calculations employing full elastic coupling to assess the qualitative and quantitative ramifications of the decoupling assumptions. The surface tractions calculated using Goodman decoupling show qualitative similarity with those of full elastic coupling but showed some severe errors in predicting the dissipation. The full decoupling approximation simulations predictions are significantly different from the predictions of full coupling calculations. However, they are no worse than the Goodman decoupling approximations in predicting dissipation.This ability to introduce extremely fine mesh resolution in a contact region with a robust contact algorithm allows us to explore many contact characteristics through numerical simulation, which were previously intractable.

ISBN: 9798538169085Subjects--Topical Terms:

649730
Mechanical engineering.
Subjects--Index Terms:

Contact algorithm

Two Enabling Developments for Computational Contact Mechanics.
LDR:05748nmm a2200409 4500 001 2347185
005 20220719070525.5
008 241004s2021 ||||||||||||||||| ||eng d
020 $a 9798538169085
035 $a (MiAaPQ)AAI28719730
035 $a AAI28719730
040 $a MiAaPQ $c MiAaPQ
100 1 $a Chauda, Gaurav. $0 (orcid)0000-0002-4304-4869 $3 3686400
245 1 0 $a Two Enabling Developments for Computational Contact Mechanics.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2021
300 $a 156 p.
500 $a Source: Dissertations Abstracts International, Volume: 83-03, Section: B.
500 $a Advisor: Segalman, Daniel J.
502 $a Thesis (Ph.D.Eng.)--Michigan State University, 2021.
506 $a This item is not available from ProQuest Dissertations & Theses.
506 $a This item must not be sold to any third party vendors.
506 $a This item must not be sold to any third party vendors.
520 $a Two approaches for computational contact mechanics are explored to provide an accurate and robust numerical simulation of frictional contact. First, a novel quasi-static contact algorithm (Method of First Violation) is developed, which provides a solution over the load history that is admissible in the sense that all equality and inequality constraints are satisfied at each load step and every point between load steps. The central idea of this algorithm is to calculate each load increment to be exactly which is necessary to cause the first nodal inequality constraint to be violated. At the end ofthat load increment, the status of the associated node is switched to a different status (such as from contact to non-contact) where the inequality constraint is replaced with an equality constraint, and a new inequality constraint is introduced. Importantly, the constraints of the previous and the new node status are simultaneously satisfiedat that point in the loading cycle.The Method of First Violation (MFV) algorithm is illustrated using a compliance formulation for degrees of freedom on the surface of a half-plane loaded by a rigid indenter with friction. The compliance formulation permits considering only the degrees of freedom in the vicinity of contact, therefore extremely fine surface discretization is possible using only a modest number of degrees of freedom. Because this contact problem has been well studied using analytic techniques and because of the extremely fine mesh resolution, it is possible to perform a critical comparison with analytical solutions.An added benefit of this algorithm is its greatly improved robustness. This indenter/half-plane discretization was also used to test MFV where friction was represented by a two-parameter (static and kinematic) model. Though such problems are notoriously ill-conditioned, the MFV remained robust. It was also used to explore a problem involving the Dahl friction model.Second, a compliance matrix formulation is derived for a two-dimensional elastic disk and for a hole in an infinite elastic plane. The circular disk/hole surface is discretized finely with a uniform distribution of nodes and a set of basis functions for traction are defined so that each basis function has a value of 1 in the vicinity of the corresponding node and a value of zero elsewhere. The surface displacement field associated with each traction basis function is obtained through a laborious derivation involving Fourier series and terms of the Michell's Airy stress function. The compliance matrix is constructed using the calculated displacement fields evaluated at each node. Fortunately, one may restrict attention to only the tractions and displacements in the vicinity of contact because all surface tractions outside that region are zero so the resulting compliance matrix is of tractable size. This semianalytical formulation provides a direct construction of a compliance matrix with an extremely fine surface discretization, easy implementation of friction models, andaccommodation of elastic coupling.The Method of First Violation and the compliance formulation of two-dimensional circular bodies are implemented together to numerically simulate multiple contact problems. Five different geometries are designed using cylinders, holes, and half-plane, where two contacting bodies are pressed against each other and then sheared cyclically for four cycles. Surface tractions, stick ratios, steady-state dissipation, and error in surface tractions are calculated using Goodman decoupling and full decoupling approximations. The results are compared with calculations employing full elastic coupling to assess the qualitative and quantitative ramifications of the decoupling assumptions. The surface tractions calculated using Goodman decoupling show qualitative similarity with those of full elastic coupling but showed some severe errors in predicting the dissipation. The full decoupling approximation simulations predictions are significantly different from the predictions of full coupling calculations. However, they are no worse than the Goodman decoupling approximations in predicting dissipation.This ability to introduce extremely fine mesh resolution in a contact region with a robust contact algorithm allows us to explore many contact characteristics through numerical simulation, which were previously intractable.
590 $a School code: 0128.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Mechanics. $3 525881
650 4 $a Computer science. $3 523869
653 $a Contact algorithm
653 $a Contact mechanics
653 $a Elastic coupling
653 $a Elasticity
653 $a Friction
653 $a Two-dimensional discretization
690 $a 0548
690 $a 0346
690 $a 0984
710 2 $a Michigan State University. $b Mechanical Engineering - Doctor of Philosophy. $3 2106417
773 0 $t Dissertations Abstracts International $g 83-03B.
790 $a 0128
791 $a Ph.D.Eng.
792 $a 2021
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28719730