東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Contact stresses of meshing gear tee...

Hsieh, Chih-Ming.

FindBook

Google Book

Amazon

博客來

Contact stresses of meshing gear teeth use of automatic incremental finite element techniques.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Contact stresses of meshing gear teeth use of automatic incremental finite element techniques./
作者:	Hsieh, Chih-Ming.
面頁冊數:	144 p.
附註:	Source: Dissertation Abstracts International, Volume: 51-11, Section: B, page: 5538.
Contained By:	Dissertation Abstracts International51-11B.
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9108618

Contact stresses of meshing gear teeth use of automatic incremental finite element techniques.
Hsieh, Chih-Ming.

Contact stresses of meshing gear teeth use of automatic incremental finite element techniques. - 144 p.

Source: Dissertation Abstracts International, Volume: 51-11, Section: B, page: 5538.

Thesis (Ph.D.)--University of Cincinnati, 1990.

This item must not be sold to any third party vendors.

The accuracy and the applicability range of finite element stress models of spur gear teeth are determined. The results show the single-tooth model is quite accurate, and thus to be preferred, for most conditions.Subjects--Topical Terms:

649730
Mechanical engineering.

Contact stresses of meshing gear teeth use of automatic incremental finite element techniques.
LDR:02479nmm a2200313 4500 001 2059999
005 20150822105426.5
008 170521s1990 ||||||||||||||||| ||eng d
035 $a (MiAaPQ)AAI9108618
035 $a AAI9108618
040 $a MiAaPQ $c MiAaPQ
100 1 $a Hsieh, Chih-Ming. $3 3174139
245 1 0 $a Contact stresses of meshing gear teeth use of automatic incremental finite element techniques.
300 $a 144 p.
500 $a Source: Dissertation Abstracts International, Volume: 51-11, Section: B, page: 5538.
500 $a Adviser: Ronald L. Huston.
502 $a Thesis (Ph.D.)--University of Cincinnati, 1990.
506 $a This item must not be sold to any third party vendors.
506 $a This item must not be added to any third party search indexes.
520 $a The accuracy and the applicability range of finite element stress models of spur gear teeth are determined. The results show the single-tooth model is quite accurate, and thus to be preferred, for most conditions.
520 $a Contact stresses in meshing spur gear teeth are examined using the single-tooth model. The analysis is based on incremental finite element procedures which simultaneously determines the stresses and the contact region between the meshing teeth. The teeth themselves are modelled by two-dimensional plane strain elements. Friction effects are included with the friction forces assumed to obey Coulomb's law. The computational effort is reduced by treating the friction forces as known external tangential forces. The analysis also assumes that the displacements are small and that the tooth materials are linearly elastic. The analysis procedure is validated by comparing its results, for two contacting elastic semi-cylinders, with classical results obtained from the Hertz method. Excellent agreement is obtained. The results of meshing spur gear teeth demonstrate the practicality of using the finite element method for gear contact stress calculations.
520 $a Finally, fillet stresses of straight bevel gear teeth, whose contact force distributions are statically indeterminate, are presented. The possibility of using the incremental finite element techniques for three-dimensional gear contact problems is discussed.
590 $a School code: 0045.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Mechanics. $3 525881
690 $a 0548
690 $a 0346
710 2 $a University of Cincinnati. $3 960309
773 0 $t Dissertation Abstracts International $g 51-11B.
790 $a 0045
791 $a Ph.D.
792 $a 1990
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9108618