東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Microfabricated Bulk Piezoelectric T...

Barham, Oliver M.

FindBook

Google Book

Amazon

博客來

Microfabricated Bulk Piezoelectric Transformers.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Microfabricated Bulk Piezoelectric Transformers./
作者:	Barham, Oliver M.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	109 p.
附註:	Source: Dissertation Abstracts International, Volume: 79-02(E), Section: B.
Contained By:	Dissertation Abstracts International79-02B(E).
標題:	Mechanics. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10615552
ISBN:	9780355297553

Microfabricated Bulk Piezoelectric Transformers.
Barham, Oliver M.

Microfabricated Bulk Piezoelectric Transformers. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 109 p.

Source: Dissertation Abstracts International, Volume: 79-02(E), Section: B.

Thesis (Ph.D.)--University of Maryland, College Park, 2017.

Piezoelectric voltage transformers (PTs) can be used to transform an input voltage into a different, required output voltage needed in electronic and electro- mechanical systems, among other varied uses. On the macro scale, they have been commercialized in electronics powering consumer laptop liquid crystal displays, and compete with an older, more prevalent technology, inductive electromagnetic volt- age transformers (EMTs). The present work investigates PTs on smaller size scales that are currently in the academic research sphere, with an eye towards applications including micro-robotics and other small-scale electronic and electromechanical sys- tems. PTs and EMTs are compared on the basis of power and energy density, with PTs trending towards higher values of power and energy density, comparatively, indicating their suitability for small-scale systems. Among PT topologies, bulk disc-type PTs, operating in their fundamental radial extension mode, and free-free beam PTs, operating in their fundamental length extensional mode, are good can- didates for microfabrication and are considered here. Analytical modeling based on the Extended Hamilton Method is used to predict device performance and integrate mechanical tethering as a boundary condition. This model differs from previous PT models in that the electric enthalpy is used to derive constituent equations of motion with Hamilton's Method, and therefore this approach is also more generally applica- ble to other piezoelectric systems outside of the present work. Prototype devices are microfabricated using a two mask process consisting of traditional photolithography combined with micropowder blasting, and are tested with various output electri- cal loads. 4mm diameter tethered disc PTs on the order of .002cm.

ISBN: 9780355297553Subjects--Topical Terms:

525881
Mechanics.

Microfabricated Bulk Piezoelectric Transformers.
LDR:03936nmm a2200349 4500 001 2154371
005 20180330125241.5
008 190424s2017 ||||||||||||||||| ||eng d
020 $a 9780355297553
035 $a (MiAaPQ)AAI10615552
035 $a (MiAaPQ)umd:18351
035 $a AAI10615552
040 $a MiAaPQ $c MiAaPQ
100 1 $a Barham, Oliver M. $3 3342097
245 1 0 $a Microfabricated Bulk Piezoelectric Transformers.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 109 p.
500 $a Source: Dissertation Abstracts International, Volume: 79-02(E), Section: B.
500 $a Adviser: Don L. DeVoe.
502 $a Thesis (Ph.D.)--University of Maryland, College Park, 2017.
520 $a Piezoelectric voltage transformers (PTs) can be used to transform an input voltage into a different, required output voltage needed in electronic and electro- mechanical systems, among other varied uses. On the macro scale, they have been commercialized in electronics powering consumer laptop liquid crystal displays, and compete with an older, more prevalent technology, inductive electromagnetic volt- age transformers (EMTs). The present work investigates PTs on smaller size scales that are currently in the academic research sphere, with an eye towards applications including micro-robotics and other small-scale electronic and electromechanical sys- tems. PTs and EMTs are compared on the basis of power and energy density, with PTs trending towards higher values of power and energy density, comparatively, indicating their suitability for small-scale systems. Among PT topologies, bulk disc-type PTs, operating in their fundamental radial extension mode, and free-free beam PTs, operating in their fundamental length extensional mode, are good can- didates for microfabrication and are considered here. Analytical modeling based on the Extended Hamilton Method is used to predict device performance and integrate mechanical tethering as a boundary condition. This model differs from previous PT models in that the electric enthalpy is used to derive constituent equations of motion with Hamilton's Method, and therefore this approach is also more generally applica- ble to other piezoelectric systems outside of the present work. Prototype devices are microfabricated using a two mask process consisting of traditional photolithography combined with micropowder blasting, and are tested with various output electri- cal loads. 4mm diameter tethered disc PTs on the order of .002cm.
520 $a 3 , two orders smaller than the bulk PT literature, had the followingperformance: a prototype with electrode area ratio (input area / output area) = 1 had peak gain of 2.3 (+/- 0.1), efficiency of 33 (+/- 0.1)% and output power density of 51.3 (+/- 4.0)W cm.
520 $a -3 (for output power of80 (+/- 6)mW) at 1M? load, for an input voltage range of 3V-6V (+/- one standard deviation). The gain results are similar to those of several much larger bulk devices in the literature, but the efficiencies of the present devices are lower. Rectangular topology, free-free beam devices were also microfabricated across 3 or- ders of scale by volume, with the smallest device on the order of .00002cm.
520 $a 3 . These devices exhibited higher quality factorsand efficiencies, in some cases, compared to circular devices, but lower peak gain (by roughly 1/2 ). Limitations of the microfab- rication process are determined, and future work is proposed. Overall, the devices fabricated in the present work show promise for integration into small-scale engi- neered systems, but improvements can be made in efficiency, and potentially voltage gain, depending on the application.
590 $a School code: 0117.
650 4 $a Mechanics. $3 525881
650 4 $a Materials science. $3 543314
650 4 $a Electrical engineering. $3 649834
690 $a 0346
690 $a 0794
690 $a 0544
710 2 $a University of Maryland, College Park. $b Mechanical Engineering. $3 1018396
773 0 $t Dissertation Abstracts International $g 79-02B(E).
790 $a 0117
791 $a Ph.D.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10615552