東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Structural Optimization of 3D Printe...

Leben, Linda M.

FindBook

Google Book

Amazon

博客來

Structural Optimization of 3D Printed Designs With Spatially-Varying Material Properties.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Structural Optimization of 3D Printed Designs With Spatially-Varying Material Properties./
作者:	Leben, Linda M.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2018,
面頁冊數:	61 p.
附註:	Source: Masters Abstracts International, Volume: 58-01.
Contained By:	Masters Abstracts International58-01(E).
標題:	Aerospace engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10828535
ISBN:	9780438177369

Structural Optimization of 3D Printed Designs With Spatially-Varying Material Properties.
Leben, Linda M.

Structural Optimization of 3D Printed Designs With Spatially-Varying Material Properties. - Ann Arbor : ProQuest Dissertations & Theses, 2018 - 61 p.

Source: Masters Abstracts International, Volume: 58-01.

Thesis (Master's)--University of Washington, 2018.

Design with conventional, homogeneous materials has historically been limited to finding ideal geometry to fit a given engineering purpose. These designs are driven by necessary geometric discontinuities which cause high strain energy gradients when subjected to mechanical loads, and thus are more likely to fail in these regions. However, new advancements in 3D printing enable manufacturing a solid part with varying material properties; this research seeks to establish techniques for finding optimal designs that use this new technology for the greatest structural benefit. A sequential quadratic programming optimization algorithm was used to find an optimal distribution of Young's modulus that minimize strain energy gradients, as calculated using finite element analysis. This design method has been applied to the case of a thin plate with a circular hole, and has been proven to successfully reduce strain energy gradients and therefore stress concentrations. The resulting optimal design has been 3D printed using applicable technology and the computational model has been validated with experiments. Proposed investigations for future research includes studying the effect of heterogeneous material properties on failure and reliability, and improving applicability to physical systems. Enabling design engineers to customize material properties around geometric discontinuities will provide greater flexibility in reducing stress concentrations without modifying geometry or adding additional mass.

ISBN: 9780438177369Subjects--Topical Terms:

1002622
Aerospace engineering.

Structural Optimization of 3D Printed Designs With Spatially-Varying Material Properties.
LDR:02483nmm a2200313 4500 001 2202003
005 20190503113354.5
008 201008s2018 ||||||||||||||||| ||eng d
020 $a 9780438177369
035 $a (MiAaPQ)AAI10828535
035 $a (MiAaPQ)washington:18862
035 $a AAI10828535
040 $a MiAaPQ $c MiAaPQ
100 1 $a Leben, Linda M. $3 3428758
245 1 0 $a Structural Optimization of 3D Printed Designs With Spatially-Varying Material Properties.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2018
300 $a 61 p.
500 $a Source: Masters Abstracts International, Volume: 58-01.
500 $a Adviser: Anthony M. Waas.
502 $a Thesis (Master's)--University of Washington, 2018.
520 $a Design with conventional, homogeneous materials has historically been limited to finding ideal geometry to fit a given engineering purpose. These designs are driven by necessary geometric discontinuities which cause high strain energy gradients when subjected to mechanical loads, and thus are more likely to fail in these regions. However, new advancements in 3D printing enable manufacturing a solid part with varying material properties; this research seeks to establish techniques for finding optimal designs that use this new technology for the greatest structural benefit. A sequential quadratic programming optimization algorithm was used to find an optimal distribution of Young's modulus that minimize strain energy gradients, as calculated using finite element analysis. This design method has been applied to the case of a thin plate with a circular hole, and has been proven to successfully reduce strain energy gradients and therefore stress concentrations. The resulting optimal design has been 3D printed using applicable technology and the computational model has been validated with experiments. Proposed investigations for future research includes studying the effect of heterogeneous material properties on failure and reliability, and improving applicability to physical systems. Enabling design engineers to customize material properties around geometric discontinuities will provide greater flexibility in reducing stress concentrations without modifying geometry or adding additional mass.
590 $a School code: 0250.
650 4 $a Aerospace engineering. $3 1002622
650 4 $a Mechanics. $3 525881
650 4 $a Mechanical engineering. $3 649730
690 $a 0538
690 $a 0346
690 $a 0548
710 2 $a University of Washington. $b Aeronautics and Astronautics. $3 2093881
773 0 $t Masters Abstracts International $g 58-01(E).
790 $a 0250
791 $a Master's
792 $a 2018
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10828535