Engineering, Metallurgy.
Overview
| Works: | 168 works in 0 publications in 0 languages | |
|---|---|---|
Titles
Oxidation behavior of nickel-base superalloys and High Strength Low Alloy (HSLA) steels at elevated temperatures.
by:
(Language materials, printed)
Realistic micromechanical modeling and simulation of two-phase heterogeneous materials.
by:
(Language materials, printed)
THREE-DIMENSIONAL HEAT FLOW IN THE DIRECT CHILL CASTING OF NON-FERROUS METALS.
by:
(Electronic resources)
Generalized sheet transition conditions for metafilm and its applications.
by:
(Electronic resources)
Phase-field models of microstructure evolution in a system with elastic inhomogeneity and defects.
by:
(Electronic resources)
Effects of metallurgical and environmental variables on the performance of alloy 718 for heat exchanger applications.
by:
(Electronic resources)
Ordered titanium dioxide nanotubular arrays: Synthesis, characterization and photoelectrochemical behavior.
by:
(Language materials, printed)
Preparation of rare earth (europium(3+), terbium(3+), thulium(3+), and ytterbium(3+)) doped yttrium oxide luminescent ceramics by the use of reverse micelles.
by:
(Language materials, printed)
Thermal plasma synthesis of titanium carbide-aluminum (titanium) nanocomposite powders.
by:
(Language materials, printed)
EFFECT OF ELECTRON-IRRADIATION ON THE STRENGTH OF IRON SINGLE CRYSTALS.
by:
(Language materials, printed)
Plasticity in copper thin films: An experimental investigation of the effect of microstructure.
by:
(Electronic resources)
Macrosegregation and sedimentation in liquid phase sintering: Specific studies in the nickel-tungsten system and iron-copper system.
by:
(Electronic resources)
Development and evaluation of P/M processing techniques to improve and control the mechanical properties of metal injection molded parts.
by:
(Electronic resources)
Measurement of dislocation velocities and mobile dislocation densities as a function of strain and strain rate in cadmium single crystals.
by:
(Electronic resources)
An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water.
by:
(Electronic resources)
Materials, design, and modeling for bipolar/end plates in polymer electrolyte membrane fuel cells.
by:
(Electronic resources)
Phase diagram, thermal stability, and high temperature oxidation of the ternary copper-nickel-iron system.
by:
(Electronic resources)
Characterization of tool wear and weld optimization in the friction-stir welding of cast aluminum 359 + 20% silicon carbide metal-matrix composite.
by:
(Electronic resources)
A thermodynamic and experimental study of the titanium-aluminium-vanadium (Ti-Al-V) ternary system.
by:
(Electronic resources)
Thermodynamic modeling and experimental investigation of the aluminum-iron-magnesium-silicon quaternary alloy system.
by:
(Electronic resources)
Thermodynamic and kinetic study on intermetallic compounds palladium-indium and tripalladium-indium: Bulk and thin film cases.
by:
(Electronic resources)
Thermodynamic modeling and experimental investigation of the molybdenum-silicon-boron-titanium quaternary system.
by:
(Electronic resources)
The influence of aluminum and carbon on the abrasion resistance of high manganese steels.
by:
(Language materials, printed)
AN EXPERIMENTAL STUDY OF THE STRENGTHENING MECHANISM AND FRACTURE BEHAVIOR OF SPHEROIDIZED CARBON STEELS.
by:
(Language materials, printed)
Precipitation in solution-treated aluminum-4wt%copper under cyclic strain.
by:
(Electronic resources)
Tensile deformation, toughness and crack propagation studies of alloy 617.
by:
(Electronic resources)
Microstructural modeling of heterogeneous failure modes in martensitic steels.
by:
(Electronic resources)
Fatigue behavior and encrustation characteristics of nanocrystalline metals.
by:
(Electronic resources)
On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming.
by:
(Electronic resources)
Contributions a la caracterisation et a l'amelioration de l'usinabilite de pieces d'acier elaborees par metallurgie des poudres.
by:
(Electronic resources)
Temporal evolution of the microstructures of aluminum(scandium, zirconium) alloys and their influences on mechanical properties.
by:
(Language materials, printed)
THE PHASE TRANSFORMATION IN COBALT BY ELECTRON TRANSMISSION MICROSCOPY.
by:
(Language materials, printed)
Stress induced phase transformation in nickel-titanium shape memory alloys.
by:
(Language materials, printed)
Process modeling of fine-blanking using thermo-mechanical coupling method.
by:
(Language materials, printed)
An integrated analysis and design method for metal forming processes.
by:
(Language materials, printed)
Atomic-scale open-volume regions in metallic glass structure and their relation to kinetic, flow and fracture processes in a zirconium-titanium-nickel-copper-beryllium bulk metallic glass.
by:
(Language materials, printed)
X-ray and neutron diffraction studies of syntactic metal foams and metal matrix composites.
by:
(Language materials, printed)
Novel applications of the sulfur dioxide/oxygen gas mixture system: Leaching of copper concentrates in ammoniacal solutions and remediation of contaminated sediments.
by:
(Language materials, printed)
Control of particle characteristics in the production of fine powder by grinding.
by:
(Language materials, printed)
Hydrodynamic modeling of solid-liquid flows in large-scale hydrocyclones.
by:
(Language materials, printed)
Modelling of 75- and 250-mm hydrocyclones and exploration of novel designs using computational fluid dynamics.
by:
(Language materials, printed)
Molecular dynamics study of microstructural evolution in alloys subjected to severe plastic deformation.
by:
(Language materials, printed)
Dynamic mechanical behavior and high pressure phase stability of a zirconium-based bulk metallic glass and its composite with tungsten.
by:
(Language materials, printed)
Incorporating external and internal weld-line defects into ductility predictions for AA5182 and AA5754 tailor-welded blanks.
by:
(Language materials, printed)
A study on the role of grain boundary engineering in promoting high-cycle fatigue resistance and improving reliability in nickel base superalloys for propulsion systems.
by:
(Language materials, printed)
Effect of microstructure on high-temperature mechanical behavior of nickel-base superalloys for turbine disc applications.
by:
(Language materials, printed)
Improving the formability limits of lightweight metal alloy sheet using advanced processes: Finite element modeling and experimental validation .
by:
(Language materials, printed)
Prediction and elimination of galling in forming galvanized advanced high strength steels (AHSS).
by:
(Language materials, printed)
Optimisation des conditions de deliantage de pieces d'acier inoxydable 316L pour des applications biomedicales.
by:
(Language materials, printed)
Initial solidification phenomena: Factors affecting heat transfer in strip casting.
by:
(Language materials, printed)
Synthesis, selective laser sintering and post-processing of metal and ceramic composites.
by:
(Language materials, printed)
Selective laser sintering of alumina and alumina-zinc borosilicate glass composites using monoclinic hydrogen borate as a binder.
by:
(Language materials, printed)
Thermal modeling of advanced manufacturing technologies: Grinding, laser drilling, and solid freeform fabrication.
by:
(Language materials, printed)
Direct selective laser sintering of high performance metals: Machine design, process development and process control.
by:
(Language materials, printed)
Liquid phase sintering of functionally graded tungsten carbide-cobalt composites.
by:
(Language materials, printed)
Domain structure investigations in multiferroic Heusler ferromagnetic shape memory alloys.
by:
(Language materials, printed)
Constitutive modeling of slip, twinning, and untwinning in AZ31B magnesium.
by:
(Language materials, printed)
Measurement and analysis of applied power, forces and material response in friction stir welding of aluminum alloy 6061.
by:
(Language materials, printed)
Chemical vapor deposition of transition metal diborides from borohydride precursors.
by:
(Language materials, printed)
Atomistic study of the deformation mechanisms during nanoindentation.
by:
(Language materials, printed)
Microstructure-sensitive extreme value probabilities of fatigue in advanced engineering alloys.
by:
(Language materials, printed)
Interaction of the friction stir welding tool and work-piece as influenced by process parameters.
by:
(Language materials, printed)
Perpendicular magnetic anisotropy materials for reduced current switching devices.
by:
(Language materials, printed)
Exploring the mechanisms of passivity on iron: Experimental methods for characterizing and developing models to describe nano-oxide growth.
by:
(Language materials, printed)
From functional properties to micro/nano-structures: A TEM study of titanium nickel (X) shape memory alloys.
by:
(Language materials, printed)
Transport processes in liquid baths and gas/liquid interfaces due to impinging gas and plasma jets.
by:
(Language materials, printed)
Synthesis and characterization of transition metal oxide nanotubes for photoelectrochemical hydrogen generation.
by:
(Language materials, printed)
An alternative to chromates for corrosion protection for aluminum alloys .
by:
(Language materials, printed)
Effects of joint preparation angle of single-vee butt welds on the tensile strength of ASTM A36 carbon steel.
by:
(Language materials, printed)
Processing, Microstructures and Properties of a Dual Phase Precipitation-Hardening PM Stainless Steel.
by:
(Language materials, printed)
Numerical simulation of directional solidification of binary alloys with high thermal gradients.
by:
(Language materials, printed)
Synthesis of designed materials by laser-based direct metal deposition technique: Experimental and theoretical approaches.
by:
(Electronic resources)
Surface hardening of titanium alloys by gas phase nitridation under kinetic control.
by:
(Electronic resources)
Processing, structure, and properties of in situ formed metallic glass matrix composites.
by:
(Electronic resources)
Crystallization of sodium chloride from a concentrated calcium chloride-potassium chloride-sodium chloride solution in a CMSMPR crystallizer: Observation of crystal size distribution and model validation.
by:
(Electronic resources)
Finite element simulation of machining a nickel-based superalloy: Inconel 718.
by:
(Electronic resources)
Deformation effects related to pin-tool geometry during friction-stir welding of aluminum alloy 6061.
by:
(Electronic resources)
Using multi-layered roll bonding and reaction annealing to process gamma-titanium aluminide sheet material.
by:
(Electronic resources)
X-RAY DIFFRACTION TECHNIQUE FOR THE STUDY OF BI-METALLIC, TWO-PHASE, DIFFUSION ZONE, WITH APPLICATION TO COPPER - SILVER ALLOY SYSTEM.
by:
(Electronic resources)
Lime-alumina-silica ceramic processing incorporating wollastonite (CaO.SiO(2)).
by:
(Electronic resources)
The influence of spray deposition processing on the microstructure and mechanical behavior of aluminum-copper-magnesium-silver alloys.
by:
(Electronic resources)
Auger photoelectron coincidence spectroscopy study of silver(100) and palladium-silver alloys.
by:
(Electronic resources)
Investigation of the ductile-to-brittle transition in single-crystal body-centered-cubic metals with three-dimensional dislocation dynamics.
by:
(Electronic resources)
Solid oxide membrane process for the direct reduction of magnesium from magnesium oxide.
by:
(Electronic resources)
Study of hydrogen permeation and diffusion in steels: Predictive model for determination of desorbed hydrogen concentration.
by:
(Electronic resources)
Fatigue damage evolution study with non-destructive magnetic properties measurement method using scanning SQUID microscopy.
by:
(Electronic resources)
Use of alloy 800H for applications in hydrogen generation using nuclear power.
by:
(Electronic resources)
Design of energy absorbing materials and composite structures based on porous shape memory alloys (SE).
by:
(Electronic resources)
Microstructure-mechanical property relationships in transient liquid phase bonded nickel-based superalloys and iron-based ODS alloys.
by:
(Electronic resources)
Modeling of concrete cracking due to corrosion of embedded reinforcement.
by:
(Electronic resources)
INFLUENCE OF MATERIAL PARAMETERS ON THE TENSILE INSTABILITY OF SHEET STEEL.
by:
(Electronic resources)
Synthesis and characterization of metal-polyaniline thin films and membranes.
by:
(Electronic resources)
Ash morphology and metals distribution during combustion of de-inking sludge.
by:
(Electronic resources)
Surface modification of ceramic and metallic alloy substrates by laser raster-scanning.
by:
(Electronic resources)
The dynamics and kinetics of alkane adsorption on platinum(111), palladium(111), and nickel(111).
by:
(Electronic resources)
X-ray microdiffraction studies of mechanical behavior and electromigration in thin film structures.
by:
(Electronic resources)
Structural characterization, biomechanical properties, and potentiodynamic polarization behavior of nickel-titanium orthodontic wire alloys.
by:
(Electronic resources)
Evaluation of the superplastic potential in commercial aluminum alloys through equal-channel angular pressing.
by:
(Electronic resources)
Computer modeling of coating thickness, heat transfer and thermal residual stress in spray deposition processes.
by:
(Electronic resources)
Nanomechanical/nanotribological characterization of thin film materials for magnetic recording.
by:
(Electronic resources)
Numerical simulation of microstructural evolution of inhomogeneous elastic media.
by:
(Electronic resources)
Evolution of microstructure and rheological behavior of alloys in the semisolid state.
by:
(Electronic resources)
The effect of processing on the mechanical and fatigue properties of semi-solid formed A357 aluminum.
by:
(Electronic resources)
Microstructural and superplastic characteristics of friction stir processed aluminum alloys.
by:
(Electronic resources)
Observation and modeling of heterogeneous microstructural evolution in tin-lead solder.
by:
(Electronic resources)
Simulation of metal transfer and weld pool development in gas metal arc welding of thin sheet metals.
by:
(Electronic resources)
Processing and characterization of phase boundaries in ceramic and metallic materials.
by:
(Electronic resources)
Textures, microstructures, anisotropy and formability of aluminum-manganese-magnesium and aluminum-magnesium alloys.
by:
(Electronic resources)
Transient plasticity and microstructural evolution of a commercial AZ31 magnesium alloy at elevated temperatures.
by:
(Electronic resources)
Modeling of microstructure property relationships in titanium-aluminum-vanadium.
by:
(Electronic resources)
Phase, microstructure, and chemistry of aluminum copper iron chromium and aluminum copper iron quasicrystalline wear coatings produced via physical vapor deposition.
by:
(Electronic resources)
Characterization of 6111-like aluminum alloys using electrochemical techniques and electron microscopy.
by:
(Electronic resources)
A novel seeding methodology for determining the detectability and effects of inclusions in titanium castings.
by:
(Electronic resources)
Diffusion and reactions between copper and lead-indium alloys: A theoretical and experimental study.
by:
(Electronic resources)
Iron-zinc reaction kinetics of hot-dip galvanized interstitial free steels.
by:
(Electronic resources)
The formation of copper(x) tin(y) intermetallic compounds in controlled collapse chip connection (C4).
by:
(Electronic resources)
Magnetic and structural characterization of high anisotropy cobalt-rich alloys: Thin films and patterns.
by:
(Electronic resources)
In-situ processing of aluminum nitride particle reinforced aluminum alloy composites.
by:
(Electronic resources)
Processing and high temperature deformation of zinc-22%aluminum eutectoid containing nanoscale dispersion particles.
by:
(Electronic resources)
Kinetics of transformation of deformation processed gold-matrix composite.
by:
(Electronic resources)
Metallurgical investigation of silver-copper-tin lead-free solder with the addition of gold.
by:
(Electronic resources)
The role of soldering process variables on properties of lead-free solder joints.
by:
(Electronic resources)
Show more
Fewer
Subjects