東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Transport processes in liquid baths ...

Qian, Feng.

Linked to FindBook

Google Book

Amazon

博客來

Transport processes in liquid baths and gas/liquid interfaces due to impinging gas and plasma jets.

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Transport processes in liquid baths and gas/liquid interfaces due to impinging gas and plasma jets./
Author:	Qian, Feng.
Description:	193 p.
Notes:	Source: Dissertation Abstracts International, Volume: 57-03, Section: B, page: 2106.
Contained By:	Dissertation Abstracts International57-03B.
Subject:	Engineering, Mechanical. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9620808

Transport processes in liquid baths and gas/liquid interfaces due to impinging gas and plasma jets.
Qian, Feng.

Transport processes in liquid baths and gas/liquid interfaces due to impinging gas and plasma jets. - 193 p.

Source: Dissertation Abstracts International, Volume: 57-03, Section: B, page: 2106.

Thesis (Ph.D.)--Drexel University, 1996.

Impinging gas or plasma jets on molten metal are commonly encountered in such processes as BOF (Basic Oxygen Furnace) and electric arc furnace steelmaking. Understanding the mechanism of transport phenomena, such as heat and mass transfer associated with the oxygen jet (in the BOF) impinging on molten metal and the arc jet (in the electric arc furnace), is important for process optimization. The interface shape is important because it determines the interaction of the metal bath with the surroundings.Subjects--Topical Terms:

783786
Engineering, Mechanical.

Transport processes in liquid baths and gas/liquid interfaces due to impinging gas and plasma jets.
LDR:02893nam 2200277 4500 001 1399213
005 20110928091658.5
008 130515s1996 ||||||||||||||||| ||eng d
035 $a (UMI)AAI9620808
035 $a AAI9620808
040 $a UMI $c UMI
100 1 $a Qian, Feng. $3 1678158
245 1 0 $a Transport processes in liquid baths and gas/liquid interfaces due to impinging gas and plasma jets.
300 $a 193 p.
500 $a Source: Dissertation Abstracts International, Volume: 57-03, Section: B, page: 2106.
502 $a Thesis (Ph.D.)--Drexel University, 1996.
520 $a Impinging gas or plasma jets on molten metal are commonly encountered in such processes as BOF (Basic Oxygen Furnace) and electric arc furnace steelmaking. Understanding the mechanism of transport phenomena, such as heat and mass transfer associated with the oxygen jet (in the BOF) impinging on molten metal and the arc jet (in the electric arc furnace), is important for process optimization. The interface shape is important because it determines the interaction of the metal bath with the surroundings.
520 $a Using a physical model consisting of water and air, the liquid surface deformed by the impinging gas jet was characterized in the experiments. A computational model was also developed to predict interface deformation, the flow field in the gas jet, and the shear driven flow field in the liquid bath. To simulate the slag/metal layers as found in the BOF and the electric arc furnace, water/corn oil and water/kerosene combinations were used in the physical modeling studies. The influence of physical properties of the two liquids on the interface shape and flow fields was studied under various impinging jet conditions. An existing phenomenological model for the penetration depth was extended for small jet exit height to jet diameter ratios.
520 $a Heat transfer from a liquid bath due to an impinging gas jet has also been investigated. Both numerical calculations and experiments were utilized to characterize the heat transfer from impinging jet on a liquid bath. Air jets with liquid baths of silicone oil, liquid metal (Amalloy-203) and water were modeled. The thermal behavior of the bath was characterized as function of jet characteristics and bath liquid properties.
520 $a A numerical model was also developed to characterize transport processes for impinging arc jets on solid metal surfaces. The heat transfer from the arc to the metal surface was calculated. Computational results were obtained for varying arc current magnitudes and anode-cathode distance. Shorter arc length is shown to be more efficient for transferring heat to the anode.
590 $a School code: 0065.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Metallurgy. $3 1023648
690 $a 0548
690 $a 0743
710 2 $a Drexel University. $3 1018434
773 0 $t Dissertation Abstracts International $g 57-03B.
790 $a 0065
791 $a Ph.D.
792 $a 1996
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9620808