Materials Engineering.

Transparent ceramics by: (Electronic resources)

Eco-friendly polymer nanocomposites = processing and properties / by: (Language materials, printed)

Nanoporous alumina = fabrication, structure, properties and applications / by: (Electronic resources)

Electrochemically engineered nanoporous materials = methods, properties and applications / by: (Electronic resources)

Eco-friendly polymer nanocomposites = chemistry and applications / by: (Electronic resources)

Temperature measurement during millisecond annealing = ripple pyrometry for flash lamp annealers / by: (Electronic resources)

Defects and impurities in silicon materials = an introduction to atomic-level silicon engineering / by: (Electronic resources)

Design and analysis of reinforced fiber composites by: (Electronic resources)

Fluid flow and heat transfer in rotating porous media by: (Electronic resources)

Materials for energy infrastructure by: (Electronic resources)

Nanomaterials in extreme environments = fundamentals and applications / by: (Electronic resources)

Active terahertz metamaterial for biomedical applications by: (Electronic resources)

Proceedings of the III Advanced Ceramics and Applications Conference by: (Electronic resources)

The automated design of materials far from equilibrium by: (Electronic resources)

Information science for materials discovery and design by: (Electronic resources)

Silica aerogel composites = novel fabrication methods / by: (Electronic resources)

Electromagnetic ultrasonic guided waves by: (Electronic resources)

Nanoclay reinforced polymer composites = natural fibre/nanoclay hybrid composites / by: (Electronic resources)

Carbon nanoparticles and nanostructures by: (Electronic resources)

Particulate composites = fundamentals and applications / by: (Electronic resources)

Advances in nanocomposites = modeling, characterization and applications / by: (Electronic resources)

Neural engineering = from advanced biomaterials to 3D fabrication techniques / by: (Electronic resources)

Electromechanically active polymers = a concise reference / by: (Electronic resources)

Refractive indices of solids by: (Electronic resources)

Nanoclay reinforced polymer composites = nanocomposites and bionanocomposites / by: (Electronic resources)

Rare metal technology 2016 = proceedings of a symposium sponsored by the Hydrometallurgy and Electrometallurgy Commitee and the Extraction & Processing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Rewas 2016 = towards materials resource sustainability : proceedings of a symposium sponsored by the Recycling and Environmental Technologies Committee, the Materials and Society Committee, the Extraction & Processing Division, and the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18 Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016) = sponsored by the Advanced Characterization, Testing, and Simulation Committee of the Structural Materials Division of the Minerals, Metals & Materials Society (TMS), held July 17-21, 2016 Omni William Penn Hotel, Pittsburgh, Pennsylvania, USA / by: (Electronic resources)

Friction stir welding and processing VII = proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) ; held during the TMS 2013 Annual Meeting & Exhibition San Antonio, Texas USA March 3-7, 2013 / by: (Electronic resources)

EPD Congress 2016 = proceedings of symposia sponsored by the Extraction & Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Magnesium technology 2016 = proceeding of a symposium sponsored by Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Advances in the science and engineering of casting solidification = an MPMD Symposium Honoring Doru Michael Stefanescu : proceedings of a symposium sponsored by the Materials Processing & Manufacturing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Florida, USA / by: (Electronic resources)

3D MS = proceedings of the 2nd International Congress on 3D Materials Science : held by June 29-July 2, 2014, L'Imperial Palace, Annecy, France / by: (Electronic resources)

TMS 2015 = 144th Annual Meeting & Exhibition : supplemental proceedings / by: (Electronic resources)

Shape casting = 5th International Symposium 2014 :: proceedings of a symposium sponsored by the Aluminum Committee of the Light Metals Division and the Solidification Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society), held during TMS 2014, 143rd Annual Meeting & Exhibition, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA / by: (Electronic resources)

Light metals 2014 = proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2014 Annual Meeting & Exhibition, February 16-20, 2014, San Diego, California, USA / by: (Electronic resources)

Ni-Co 2013 = proceedings of symposium sponsored by the TMS Extraction & Processing Division, TMS High Temperature Alloys Committee, and the Metallurgy and Materials Society of the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) : held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013 / by: (Electronic resources)

Magnesium technology 2013 = proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013 / by: (Electronic resources)

Light metals 2011 = proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA, February 27-March 3, 2011 / by: (Electronic resources)

The production and processing of inorganic materials by: (Electronic resources)

Shape casting = 6th International Symposium : proceedings of a symposium sponsored by the Aluminum Committee of the Light Metals Division and the Solidification Committee of the Materials Processing & Manufacturing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Friction stir welding and processing VIII = proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Light metals 2012 = proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2012 Annual Meeting & Exhibition, Orlando, Florida, USA, March 11-15, 2012 / by: (Electronic resources)

Energy technology 2016 = carbon dioxide management and other technologies : proceedings of the Energy Technologies and Carbon Dixoide Management Symposium, sponsored by the Energy Committee of the Extraction & Processing Division (EPD) and the Light Metals Division (LMD) of the Minerals, Metals & Materials Society (TMS) / by: (Electronic resources)

Magnesium technology 2015 = proceedings of a symposium sponsored by Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Rare metal technology 2015 = proceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Essential readings in light metals.. Volume 4,. Electrode technology for aluminum production by: (Electronic resources)

Magnesium technology 2012 = proceedings of symsposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) ; held during TMS 2012 Annual Meeting & Exhibition, Orlando, Flordia, USA, March 11-15, 2012 / by: (Electronic resources)

Diffusion in solids by: (Electronic resources)

Characterization of minerals, metals, and materials 2016 = proceedings of a symposium sponsored by the Materials Characterization Committee of the Extraction and Processing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

EPD Congress 2015 = proceedings of a symposia sponsored by the Extraction & Processing Division (EPD) of The Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

6th International Symposium on High-Temperature Metallurgical Processing = proceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Energy technology 2015 = carbon dioxide management and other technologies : proceedings of the Energy Technologies and Carbon Dioxide Management Symposium, sponsored by the Energy Committee of the Extraction & Processing Division (EPD) and the Light Metals Division (LMD) of the Minerals, Metals & Materials Society (TMS) / by: (Electronic resources)

Magnesium technology 2011 = proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA February 27-March 3, 2011 / by: (Electronic resources)

Essential readings in light metals.. Volume 3,. Cast shop for aluminum production by: (Electronic resources)

Celebrating the megascale = proceedings of the Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson : proceedings of a symposium sponsored by the Extraction and Processing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2014, 143rd Annual Meeting & Exhibition, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA / by: (Electronic resources)

TMS 2014 = 143rd Annual Meeting & Exhibition : Annual meeting supplemental proceedings / by: (Electronic resources)

Fatigue of materials III = advances and emergencies in understanding : proceedings of the third biennial symposium ; sponsored by The Minerals, Metals & Materials Society (TMS) and ASM International held during Materials Science & Technology 2014 (MS&T'14), October 12-16, 2014 in Pittsburgh, Pennsylvania / by: (Electronic resources)

Drying, roasting, and calcining of minerals = proceedings of a symposium sponsored by The Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Light metals 2015 = proceedings of the symposia sponsored by the TMS Alumnium Committee at the TMS 2015 Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Light metals 2016 = proceedings of the symposia sponsored by the Aluminum Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18 Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

TMS 2016 = 145th Annual Meeting & Exhibition : supplemental proceedings / by: (Electronic resources)

Proceedings of the 1st International Conference on 3D Materials Science = held July 8-12, 2012, Seven Springs Mountain Resort, Seven Springs, Pennsylvania, USA / by: (Electronic resources)

Composite materials = processing, applications, characterizations / by: (Electronic resources)

Phosphors, up conversion nano particles, quantum dots and their applications.. Volume 1 by: (Electronic resources)

Mechanics of composite and multi-functional materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 7 by: (Electronic resources)

Inorganic scintillators for detector systems = physical principles and crystal engineering / by: (Electronic resources)

Fillers for polymer applications by: (Electronic resources)

Charge-trapping non-volatile memories.. Volume 2,. Emerging materials and structures by: (Electronic resources)

Applications of process engineering principles in materials processing, energy and environmental technologies = an EPD symposium in honor of Professor Ramana G. Reddy / by: (Electronic resources)

Mechanical and creep behavior of advanced materials = a SMD symposium honoring Professor K. Linga Murty / by: (Electronic resources)

8th International Symposium on High-Temperature Metallurgical Processing by: (Electronic resources)

Characterization of minerals, metals, and materials 2017 by: (Electronic resources)

TMS 2017 = 146th Annual Meeting & Exhibition Supplemental Proceedings / by: (Electronic resources)

Light metals 2017 by: (Electronic resources)

Materials processing fundamentals 2017 by: (Electronic resources)

Proceedings of the 3rd Pan American Materials Congress by: (Electronic resources)

Friction stir welding and processing IX by: (Electronic resources)

Magnesium technology 2017 by: (Electronic resources)

Submicron porous materials by: (Electronic resources)

Basic thermochemistry in materials processing by: (Electronic resources)

Mixed convection in fluid superposed porous layers by: (Electronic resources)

Materials design and applications by: (Electronic resources)

Electro-chemo-mechanics of solids by: (Electronic resources)

Energy materials 2017 by: (Electronic resources)

Creep in ceramics by: (Electronic resources)

International Digital Imaging Correlation Society = proceedings of the first Annual Conference, 2016 / by: (Electronic resources)

Non-traditional micromachining processes = fundamentals and applications / by: (Electronic resources)

Deformation and fracture behaviour of polymer materials by: (Electronic resources)

Raw materials substitution sustainability by: (Electronic resources)

Ceramic membranes applied in separation processes by: (Electronic resources)

The political economy of Russian aluminium = between the dual state and global markets / by: (Electronic resources)

Electrochemistry for corrosion fundamentals by: (Electronic resources)

Carbon = the black, the gray and the transparent / by: (Electronic resources)

Materials processing fundamentals 2018 by: (Electronic resources)

Characterization of minerals, metals, and materials 2018 by: (Electronic resources)

9th International Symposium on High-Temperature Metallurgical processing by: (Electronic resources)

Magnesium technology 2018 by: (Electronic resources)

Metal-matrix composites innovations, advances and applications = an SMD Symposium in Honor of William C. Harrigan, Jr. / by: (Electronic resources)

Advanced high strength steel = processing and applications / by: (Electronic resources)

Shock and materials by: (Electronic resources)

Magnetostatic modelling of thin layers using the method of moments and its implementation in Octave/Matlab by: (Electronic resources)

Advanced functional materials = proceedings of Chinese Materials Conference 2017 / by: (Electronic resources)

Materials that move = smart materials, intelligent design / by: (Electronic resources)

Progress in materials science and engineering by: (Electronic resources)

Mechanical properties and working of metals and alloys by: (Electronic resources)

Fire retardancy behavior of polymer/clay nanocomposites by: (Electronic resources)

Handbook of sol-gel science and technology = processing, characterization and applications / by: (Electronic resources)

Advanced manufacturing and materials science = selected extended papers of ICAMMS 2018 / by: (Electronic resources)

Acetylene and its polymers = 150+ years of history / by: (Electronic resources)

Springer handbook of materials data by: (Electronic resources)

Cascade use in technologies 2018 = Internationale Konferenz zur Kaskadennutzung und Kreislaufwirtschaft - Oldenburg 2018 / by: (Electronic resources)

Advances in materials and metallurgy = select proceedings of ICEMMM 2018 / by: (Electronic resources)

Hot stamping of ultra high-strength steels = from a technological and business perspective / by: (Electronic resources)

Advances in manufacturing processes = select proceedings of ICEMMM 2018 / by: (Electronic resources)

Reliability of selective laser melted AlSi12 alloy for quasistatic and fatigue applications by: (Electronic resources)

Materials design and applications.. II by: (Electronic resources)

Die-attach materials for high temperature applications in microelectronics packaging = materials, processes, equipment, and reliability / by: (Electronic resources)

Shape casting = 7th International Symposium Celebrating Prof. John Campbell's 80th Birthday / by: (Electronic resources)

Advanced real time imaging II = cutting-edge techniques in materials science studies / by: (Electronic resources)

Materials processing fundamentals 2019 by: (Electronic resources)

Bio-based polymers and nanocomposites = preparation, processing, properties and performance / by: (Electronic resources)

Advances in thin films, nanostructured materials, and coatings = selected papers from the 2018 International Conference on "Nanomaterials: Applications & Properties" / by: (Electronic resources)

Friction stir welding and processing X by: (Electronic resources)

10th International Symposium on High-Temperature Metallurgical Processing by: (Electronic resources)

Magnesium technology 2019 by: (Electronic resources)

REWAS 2019 = manufacturing the circular materials economy / by: (Electronic resources)

Light metals 2019 by: (Electronic resources)

Spark plasma sintering of materials = advances in processing and applications / by: (Electronic resources)

Green materials engineering = an EPD Symposium in honor of Sergio Monteiro / by: (Electronic resources)

TMS 2019 148th annual meeting & exhibition supplemental proceedings by: (Electronic resources)

Characterization of minerals, metals, and materials 2019 by: (Electronic resources)

Self-healing nanotextured vascular engineering materials by: (Electronic resources)

Polypropylene handbook = morphology, blends and composites / by: (Electronic resources)

Highway engineering composite material and its application by: (Electronic resources)

Characterisation of turbulent duct flows = experiments and direct numerical simulations / by: (Electronic resources)

Sustainable lignin for carbon fibers = principles, techniques and applications / by: (Electronic resources)

Nanoelectronic materials = fundamentals and applications / by: (Electronic resources)

Functional textiles and clothing by: (Electronic resources)

Progress in engineering technology = automotive, energy generation, quality control and efficiency / by: (Electronic resources)

Structural materials = properties and selection / by: (Electronic resources)

Shape memory polymers, blends and composites = advances and applications / by: (Electronic resources)

Engineering design applications II = structures, materials and processes / by: (Electronic resources)

ICAF 2019 = structural integrity in the age of additive manufacturing : proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, June 2-7, 2019, Krakow, Poland / by: (Electronic resources)

iMEC-APCOMS 2019 = proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems / by: (Electronic resources)

Aerospace alloys by: (Electronic resources)

Advances in additive manufacturing and joining = proceedings of AIMTDR 2018 / by: (Electronic resources)

Plasticity, damage and fracture in advanced materials by: (Electronic resources)

Reference materials in measurement and technology = proceedings of the Third International Scientific Conference / by: (Electronic resources)

Advanced materials for defense = development, analysis and applications / by: (Electronic resources)

Energy Technology 2020 = recycling, carbon dioxide management, and other technologies / by: (Electronic resources)

Aquatic biopolymers = understanding their industrial significance and environmental implications / by: (Electronic resources)

Rare Metal Technology 2020 by: (Electronic resources)

11th International Symposium on High-Temperature Metallurgical Processing by: (Electronic resources)

Revolutionizing aircraft materials and processes by: (Electronic resources)

Integrated computational materials engineering (ICME) = advancing computational and experimental methods / by: (Electronic resources)

Proceedings of the 2nd International Conference on Microplastic Pollution in the Mediterranean Sea by: (Electronic resources)

Innovations and breakthroughs in the gold and silver industries = concepts, applications and future trends / by: (Electronic resources)

The world of materials by: (Electronic resources)

Introduction to refractories for iron- and steelmaking by: (Electronic resources)

Architecting robust co-design of materials, products, and Manufacturing Processes by: (Electronic resources)

Advances in Materials Processing = select proceedings of ICFMMP 2019 / by: (Electronic resources)

Biointerface engineering = prospects in medical diagnostics and drug delivery / by: (Electronic resources)

Environmental remediation through carbon based nano composites by: (Electronic resources)

Laser cladding of metals by: (Electronic resources)

Novel lanthanum zirconate-based thermal barrier coatings for energy applications by: (Electronic resources)

Phenolic polymers based composite materials by: (Electronic resources)

Multiscale solid mechanics = strength, durability, and dynamics / by: (Electronic resources)

Advances in mechanical processing and design = select proceedings of ICAMPD 2019 / by: (Electronic resources)

Structural health monitoring system for synthetic, hybrid and natural fiber composites by: (Electronic resources)

Tribological applications of composite materials by: (Electronic resources)

Materials research and applications = select papers from JCH8-2019 / by: (Electronic resources)

Graphene based biopolymer nanocomposites by: (Electronic resources)

High-performance ferrous alloys by: (Electronic resources)

Functional textiles and clothing 2020 by: (Electronic resources)

Machining and machinability of fiber reinforced polymer composites by: (Electronic resources)

Sustainable issues in infrastructure engineering = the official 2020 publication of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (Electronic resources)

Strength of materials by: (Electronic resources)

Contemporary nanomaterials in material engineering applications by: (Electronic resources)

Eco-friendly adhesives for wood and natural fiber composites = characterization, fabrication and applications / by: (Electronic resources)

Computational materials, chemistry, and biochemistry = from bold initiatives to the last mile : in honor of William A. Goddard's contributions to science and engineering.. Volume 2 / by: (Electronic resources)

Biocomposite materials = design and mechanical properties characterization / by: (Electronic resources)

Innovations in everyday engineering materials by: (Electronic resources)

Advances in hybrid conducting polymer technology by: (Electronic resources)

Collagen biografts for tunable drug delivery by: (Electronic resources)

Ammonothermal synthesis and crystal growth of nitrides = chemistry and technology / by: (Electronic resources)

Friction stir welding and processing XI by: (Electronic resources)

Materials with extreme wetting properties = methods and emerging industrial applications / by: (Electronic resources)

Ni-Co 2021 = the 5th International Symposium on Nickel and Cobalt / by: (Electronic resources)

Materials design and applications.. III by: (Electronic resources)

Electrospinning for advanced energy storage applications by: (Electronic resources)

Materials, design, and manufacturing for sustainable environment = select proceedings of ICMDMSE 2020 / by: (Electronic resources)

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020).. Volume II by: (Electronic resources)

Energy-sustainable advanced materials by: (Electronic resources)

Data technology in materials modelling by: (Electronic resources)

Artificial intelligence for materials science by: (Electronic resources)

Advances in manufacturing engineering and materials II = proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), 21-25 June, 2021, Novy Smokovec, Slovakia / by: (Electronic resources)

Fracture, fatigue, failure and damage evolution. = proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /. Volume 3 by: (Electronic resources)

Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020) by: (Electronic resources)

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020).. Volume I by: (Electronic resources)

Challenges in mechanics of time dependent materials. = proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /. Volume 2 by: (Electronic resources)

Carbide in special steel = formation mechanism and control technology / by: (Electronic resources)

Crosslinkable polyethylene based blends and nanocomposites by: (Electronic resources)

Electrochemical methods of nanostructure preparation by: (Electronic resources)

Graphene and nanoparticles hybrid nanocomposites = from preparation to applications / by: (Electronic resources)

Comprehensive utilization of magnesium slag by pidgeon process by: (Electronic resources)

Crosslinkable polyethylene = manufacture, properties, recycling, and applications / by: (Electronic resources)

Inert anodes for aluminum electrolysis by: (Electronic resources)

Handbook of engineering practice of materials and corrosion by: (Electronic resources)

Mold and core sands in metalcasting = chemistry and ecology : sustainable development / by: (Electronic resources)

Phase transformation in metals = mathematics, theory and practice / by: (Electronic resources)

CT scan generated material twins for composites manufacturing in Industry 4.0 by: (Electronic resources)

Handbook of advanced ceramics and composites = defense, security, aerospace and energy applications / by: (Electronic resources)

Self-healing and self-recovering hydrogels by: (Electronic resources)

Physical chemistry of metallurgical processes by: (Electronic resources)

Iron-based superconducting thin films by: (Electronic resources)

Structural materials = behavior, testing and evaluation / by: (Electronic resources)

Ten materials that shaped our world by: (Electronic resources)

Handbook of nanomaterials and nanocomposites for energy and environmental applications by: (Electronic resources)

Austenitic TRIP/TWIP steels and steel-zirconia composites = design of tough, transformation-strengthened composites and structures / by: (Electronic resources)

Platinum monolayer electrocatalysts by: (Electronic resources)

Fibers for technical textiles by: (Electronic resources)

Proceedings of the 4th International Symposium on Materials and Sustainable Development.. Volume 1,. Nano technology and advanced materials by: (Electronic resources)

Engineering of thermoplastic elastomer with graphene and other anisotropic nanofillers by: (Electronic resources)

Proceedings of the 4th International Symposium on Materials and Sustainable Development.. Volume 2,. Waste recycling and environment by: (Electronic resources)

Date palm fiber composites = processing, properties and applications / by: (Electronic resources)

An insight into metal based foams = processing, properties and applications / by: (Electronic resources)

Geopolymer and geopolymer matrix composites by: (Electronic resources)

Advances in sustainable polymers = synthesis, fabrication and characterization / by: (Electronic resources)

Revolution of perovskite = synthesis, properties and applications / by: (Electronic resources)

A virtual testing approach for honeycomb sandwich panel joints in aircraft interior by: (Electronic resources)

Advances in polymer processing 2020 = proceedings of the International Symposium on Plastics Technology / by: (Electronic resources)

High-entropy materials = theory, experiments, and applications / by: (Electronic resources)

Fundamentals of metal joining = processes, mechanism and performance / by: (Electronic resources)

Advanced mems/nems fabrication and sensors by: (Electronic resources)

Recent advances in manufacturing engineering and processes = proceedings of ICMEP 2021 / by: (Electronic resources)

Advancement in materials, manufacturing and energy engineering. = select proceedings of ICAMME 2021 /. Vol. I by: (Electronic resources)

Smelter grade alumina from bauxite = history, best practices, and future challenges / by: (Electronic resources)

REWAS 2022 = developing tomorrow's technical cycles.. (Volume I) / by: (Electronic resources)

Characterization of minerals, metals, and materials 2022 by: (Electronic resources)

Furnace tapping 2022 by: (Electronic resources)

12th International Symposium on High-Temperature Metallurgical Processing by: (Electronic resources)

COVID-19 pandemic = research and development activities from modeling to realization / by: (Electronic resources)

TMS 2022 151st annual meeting & exhibition = supplemental proceedings / by: (Electronic resources)

Metal-matrix composites = advances in processing, characterization, performance and analysis / by: (Electronic resources)

Nondestructive testing and evaluation of fiber-reinforced composite structures by: (Electronic resources)

Optical metamaterials by block copolymer self-assembly by: (Electronic resources)

Mechanics of materials = an introduction to engineering technology / by: (Electronic resources)

Insight into designing biocompatible magnesium alloys and composites = processing, mechanical and corrosion characteristics / by: (Electronic resources)

Modeling approaches to natural convection in porous media by: (Electronic resources)

Electro-chemo-mechanics of anodic porous alumina nano-honeycombs = self-ordered growth and actuation / by: (Electronic resources)

From creep damage mechanics to homogenization methods = a Liber Amicorum to celebrate the birthday of Nobutada Ohno / by: (Language materials, printed)

Furniture design by: (Language materials, printed)

Textile materials for lightweight constructions = technologies - methods - materials - properties / by: (Electronic resources)

Mechanics of composite and multifunctional materials. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 7 by: (Electronic resources)

Smart Intelligent Aircraft Structures (SARISTU) = proceedings of the Final Project Conference / by: (Electronic resources)

Challenges in mechanics of time dependent materials. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 2 by: (Electronic resources)

Advancement of optical methods in experimental mechanics. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 3 by: (Electronic resources)

Solid oxide fuel cell components = interfacial compatibility of SOFC glass seals / by: (Electronic resources)

Mechanothermodynamics by: (Electronic resources)

Nano and biotech based materials for energy building efficiency by: (Electronic resources)

Biomaterials and medical devices = a perspective from an emerging country / by: (Electronic resources)

Handbook of bioceramics and biocomposites by: (Electronic resources)

Peptide-mediated biomineralization by: (Electronic resources)

Corrosion control and surface finishing = environmentally friendly approaches / by: (Electronic resources)

Power systems grounding by: (Electronic resources)

Generalized continua as models for classical and advanced materials by: (Electronic resources)

Microstructure-property correlations for hard, superhard, and ultrahard materials by: (Electronic resources)

Surface modifications and growth of titanium dioxide for photo-electrochemical water splitting by: (Electronic resources)

Self-healing materials by: (Electronic resources)

Physics and mechanics of primary well cementing by: (Electronic resources)

Phosphors, up conversion nano particles, quantum dots and their applications.. Volume 2 by: (Electronic resources)

Electrochemistry and corrosion science by: (Electronic resources)

Handbook of maleic anhydride based materials = syntheses, properties and applications / by: (Electronic resources)

7th International Symposium on High-Temperature Metallurgical Processing = proceedings of a symposium sponsored by the Pyrometallurgy Committee of the Extraction and Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) held during TMS 2016 145th Annual Meeting & Exhibition, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

REWAS 2013 = enabling materials resource sustainability : proceesdings of the symposium, REWAS 2013: enabling materials resource sustaunability, sponsored by the EPD-LMD Recycling and Environmental Technology Committee and the TMS Materials and Society Committee; and the symposium, Battery Recycling, sponsored by the EMPMD Energy Conversion and Storage Committee and the EPD-LMD Recycling and Environmental Technology Committee ; held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, by: (Electronic resources)

Proceedings of the TMS Middle East = Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015) : held January 11-14, 2015, Doha, Qatar / by: (Electronic resources)

Engineering solutions for sustainability = materials and resources II : held at the TMS 2015 Annual Meeting, Orlando, Florida, USA, March 18-19, 2015 / by: (Electronic resources)

Large-scale production of paper-based Li-ion cells by: (Electronic resources)

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 9 by: (Electronic resources)

Material parameter identification and inverse problems in soft tissue biomechanics by: (Electronic resources)

Programming phase-field modeling by: (Electronic resources)

Materials, energy and environment engineering = select proceedings of ICACE 2015 / by: (Electronic resources)

Engineering applications of nanotechnology = from energy to drug delivery / by: (Electronic resources)

Models, simulation, and experimental issues in structural mechanics by: (Electronic resources)

Proceedings of the IV Advanced Ceramics and Applications Conference by: (Electronic resources)

Green biocomposites = design and applications / by: (Electronic resources)

Bending behavior of thermoplastic composite sheets = viscoelasticity and temperature dependency in the draping process / by: (Electronic resources)

Wave dynamics and composite mechanics for microstructured materials and metamaterials by: (Electronic resources)

Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) by: (Electronic resources)

Mechanics for materials and technologies by: (Electronic resources)

On the time and temperature dependent behaviour of laminated amorphous polymers subjected to low-velocity impact by: (Electronic resources)

Protection of materials and structures from the space environment = ICPMSE-11 / by: (Electronic resources)

Applied metallurgy and corrosion control = a handbook for the petrochemical industry / by: (Electronic resources)

Wood polymer nanocomposites = chemical modifications, properties and sustainable applications / by: (Electronic resources)

Advances in nanomaterials = fundamentals, properties and applications / by: (Electronic resources)

Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications = presented at the XXV International Materials Research Congress - Cancun 2016 / by: (Electronic resources)

Physical test methods for elastomers by: (Electronic resources)

Frontiers in materials processing, applications, research and technology = select proceedings of FiMPART 2015 / by: (Electronic resources)

Bionanocomposites for packaging applications by: (Electronic resources)

Ferroic functional materials = experiment, modeling and simulation / by: (Electronic resources)

Spin dynamics and damping in ferromagnetic thin films and nanostructures by: (Electronic resources)

Proceedings of the International Conference on Microplastic Pollution in the Mediterranean Sea by: (Electronic resources)

China's high-speed rail technology = an international perspective / by: (Electronic resources)

TMS 2018 147th Annual Meeting & Exhibition supplemental proceedings by: (Electronic resources)

Light Metals 2018 by: (Electronic resources)

Proceedings of the International Conference on Martensitic Transformations = Chicago / by: (Electronic resources)

Modeling, design, construction, and operation of power generators with solid oxide fuel cells = from single cell to complete power system / by: (Electronic resources)

Renewable and sustainable materials in green technology by: (Electronic resources)

The selected models of the mesostructure of composites = percolation, clusters, force fields / by: (Electronic resources)

Materials handbook = a concise desktop reference / by: (Electronic resources)

Powerful pulsed plasma generators = research and application / by: (Electronic resources)

3D printing and additive manufacturing technologies by: (Electronic resources)

Strengthening and Joining by Plastic Deformation = select papers from AIMTDR 2016 / by: (Electronic resources)

Pipeline steels for sour service by: (Electronic resources)

Advances and challenges in structural engineering = proceedings of the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 : the Official International Congress of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (Electronic resources)

Dynamic behavior of materials. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 1 by: (Electronic resources)

Nano-energetic materials by: (Electronic resources)

Vibration analysis of functionally graded piezoelectric actuators by: (Electronic resources)

Semiconducting metal oxides for gas sensing by: (Electronic resources)

Advances in materials, mechanical and industrial engineering = selected contributions from the First International Conference on Mechanical Engineering, Jadavpur University, Kolkata, India / by: (Electronic resources)

Handbook of nonlocal continuum mechanics for materials and structures by: (Electronic resources)

Advanced engineering for processes and technologies by: (Electronic resources)

Near net shape manufacturing processes by: (Electronic resources)

Anisotropic metal chalcogenide nanomaterials = synthesis, assembly, and applications / by: (Electronic resources)

Micro-electrical discharge machining processes = technologies and applications / by: (Electronic resources)

Innovation in materials science and engineering = proceedings of ICEMIT 2017.. Volume 2 / by: (Electronic resources)

Physics and techniques of ceramic and polymeric materials = proceedings of Chinese Materials Conference 2018 / by: (Electronic resources)

Handbook of ecomaterials by: (Electronic resources)

Willemite-based glass ceramic doped by different percentage of erbium oxide and sintered in temperature of 500-1100C = physical and optical properties / by: (Electronic resources)

Novel aspects of diamond = from growth to applications / by: (Electronic resources)

Handbook of mechanics of materials by: (Electronic resources)

High-entropy materials = a brief introduction / by: (Electronic resources)

Mechanical fatigue of metals = experimental and simulation perspectives / by: (Electronic resources)

Materials and manufacturing processes by: (Electronic resources)

Computational homogenization of heterogeneous materials with finite elements by: (Electronic resources)

Interface influence on moisture transport in building components = the wetting process / by: (Electronic resources)

Corrosion processes = sensing, monitoring, data analytics, prevention/protection, diagnosis/prognosis and maintenance strategies / by: (Electronic resources)

Emerging research in science and engineering based on advanced experimental and computational strategies by: (Electronic resources)

Mechanics of composite and multi-functional materials. = proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics /. Volume 5 by: (Electronic resources)

PbZn 2020 = 9th International Symposium on Lead and Zinc Processing / by: (Electronic resources)

Light metals 2020 by: (Electronic resources)

Thermophysical properties and measuring technique of Ge-Sb-Te alloys for phase change memory by: (Electronic resources)

Materials processing fundamentals 2020 by: (Electronic resources)

Green production of carbon nanomaterials in molten salts and applications by: (Electronic resources)

Advances in powder and ceramic materials science by: (Electronic resources)

Solid-state welding = friction and friction stir welding processes / by: (Electronic resources)

Advances in mechanical engineering = select proceedings of ICRIDME 2018 / by: (Electronic resources)

Vapor crystal growth and characterization = ZnSe and related II-VI compound semiconductors / by: (Electronic resources)

TMS 2020 149th Annual Meeting & Exhibition Supplemental proceedings by: (Electronic resources)

Pineapple leaf fibers = processing, properties and applications / by: (Electronic resources)

Surface engineering of modern materials by: (Electronic resources)

Wood & fire safety = proceedings of the 9th International Conference on Wood & Fire Safety 2020 / by: (Electronic resources)

RF power semiconductor generator application in heating and energy utilization by: (Electronic resources)

Molecular nanomagnets = fundamental understanding / by: (Electronic resources)

Deformation processes in TRIP/TWIP steels = in-situ characterization techniques / by: (Electronic resources)

Lignin = biosynthesis and transformation for industrial applications / by: (Electronic resources)

IRC-SET 2018 = proceedings of the 4th IRC Conference on Science, Engineering and Technology / by: (Electronic resources)

Surface engineering of graphene by: (Electronic resources)

Nanoengineering materials for biomedical uses by: (Electronic resources)

Electronic waste and printed circuit board recycling technologies by: (Electronic resources)

Graphene functionalization strategies = from synthesis to applications / by: (Electronic resources)

A practical guide to surface metrology by: (Electronic resources)

Advances in design, simulation and manufacturing III = proceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.. Volume 1,. Manufacturing and materials engineering / by: (Electronic resources)

Mechanics of metamaterials with negative parameters by: (Electronic resources)

Wooden facades and fire safety = effects of joint type on ignition behaviour / by: (Electronic resources)

Adaptronics - smart structures and materials by: (Electronic resources)

Bamboo fiber composites = processing, properties and applications / by: (Electronic resources)

Materials engineering--from ideas to practice = an EPD Symposium in honor of Jiann-Yang Hwang / by: (Electronic resources)

Intelligent quality assessment of railway switches and crossings by: (Electronic resources)

Handbook of spine technology by: (Electronic resources)

Dynamic behavior of materials. = proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /. Volume 1 by: (Electronic resources)

Mechanics of composite, hybrid and multifunctional materials. = proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /. Volume 6 by: (Electronic resources)

Advances in engineering materials = select proceedings of FLAME 2020 / by: (Electronic resources)

Cold spray additive manufacturing = from fundamentals to applications / by: (Electronic resources)

Classical and relativistic rational extended thermodynamics of gases by: (Electronic resources)

Advances in design, simulation and manufacturing IV = proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.. Volume 1,. Manufacturing and materials engineering / by: (Electronic resources)

Advances in design, simulation and manufacturing IV = proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.. Volume 2,. Mechanical and chemical engineering / by: (Electronic resources)

Limestone mining in India by: (Electronic resources)

Monodisperse highly ordered and polydisperse biobased solid foams by: (Electronic resources)

Analysis of glass panels subjected to blast load by: (Electronic resources)

Basic quantum mechanics by: (Electronic resources)

New approaches of geotechnical engineering = soil characterization, sustainable materials and numerical simulation : proceedings of the 6th GeoChina International Conference on Civil & Transportation Infrastructures : from Engineering to Smart & Green Life Cycle Solutions -- Nanchang, China, 2021 / by: (Electronic resources)

Advances in machining of composite materials = conventional and non-conventional processes / by: (Electronic resources)

Advances in materials processing and manufacturing applications = proceedings of iCADMA 2020 / by: (Electronic resources)

Advances in mechanical engineering = select proceedings of CAMSE 2020 / by: (Electronic resources)

Physics and chemistry of Te and HgTe-based ternary semiconductor melts by: (Electronic resources)

Thermal spray fundamentals = from powder to part / by: (Electronic resources)

6th International Conference on Adhesive Bonding 2021 = selected contributions of AB 2021 / by: (Electronic resources)

Handbook of laser micro- and nano-engineering by: (Electronic resources)

Bismuth-ferrite-based electrochemical supercapacitors by: (Electronic resources)

Advances in materials science and engineering = select proceedings of ICFMMP 2019 / by: (Electronic resources)

Additive manufacturing processes by: (Electronic resources)

Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials = ICE-SEAM 2019, 16-17 October 2019, Surakarta, Indonesia / by: (Electronic resources)

Progress in engineering technology II by: (Electronic resources)

Heatmetry = the science and practice of heat flux measurement / by: (Electronic resources)

Mechanical behavior and fracture of engineering materials by: (Electronic resources)

Superconductivity = from materials science to practical applications / by: (Electronic resources)

Resistive switching = oxide materials, mechanisms, devices and operations / by: (Electronic resources)

Advanced materials = an introduction to modern materials science / by: (Electronic resources)

Hydrometallurgy = fundamentals and applications / by: (Electronic resources)

Impact damages of braided composites by: (Electronic resources)

Local and nonlocal micromechanics of heterogeneous materials by: (Electronic resources)

High-performance composite structures = additive manufacturing and processing / by: (Electronic resources)

Mechanics of composite, hybrid and multifunctional materials, fracture, fatigue, failure and damage evolution. = proceedings of the 2021 Annual Conference on Experimental and Applied Mechanics /. Volume 3 by: (Electronic resources)

Theory and technology of roll stamping by: (Electronic resources)

Challenges in mechanics of time dependent materials, mechanics of biological systems and materials & micro-and nanomechanics. = proceedings of the 2021 Annual Conference & Exposition on Experimental and Applied Mechanics /. Volume 2 by: (Electronic resources)

Advances in mechanical and materials technology = select proceedings of EMSME 2020.. Volume 2 / by: (Electronic resources)

Advancement in materials, manufacturing and energy engineering. = select proceedings of ICAMME 2021 /. Vol. II by: (Electronic resources)

In situ characterization methodology for the design and analysis of composite pressure vessels by: (Electronic resources)

Topological states for new modes of information storage and transfer = a survey of the status of the discovery of the majorana modes in the solid state / by: (Electronic resources)

Lignocellulosic fibers = sustainable biomaterials for green composites / by: (Electronic resources)

Bio-fiber reinforced composite materials = mechanical, thermal and tribological properties / by: (Electronic resources)

Advances in nanocomposite materials for environmental and energy harvesting applications by: (Electronic resources)

Welding simulations using ABAQUS = a practical guide for engineers / by: (Electronic resources)

Essential readings in light metals.. Volume 1,. Alumina and bauxite by: (Electronic resources)

Advances in molten slags, fluxes, and salts = proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016 : sponsored by Extraction & Processing Division and Materials Processing and Manufacturing Division of The Minerals, Metals & Materials Society (TMS) ; held May 22-25, 2016, Seattle Grand Hyatt, Seattle, Washington, USA / by: (Electronic resources)

Essential readings in light metals.. Volume 2,. Aluminum reduction technology by: (Electronic resources)

PRICM 8 = proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing : sponsored by The Chinese Society for Metals (CSM), The Japan Institute of Metals (JIM), The Korean Institute of Metals and Materials (KIM), Materials Australia (MA), and the Minerals, Metals & Materials Society (TMS) ; held August 4-9, 2013, at the Hilton Waikoloa Village in Waikoloa, Hawaii, USA / by: (Electronic resources)

Energy Materials 2014 = conference proceedings : November 4-6, 2014, Xi'an, Shaanxi Province, China / by: (Electronic resources)

HSLA steels 2015, microalloying 2015 & offshore engineering steels 2015 = conference proceedings, held November 11-13th, 2015, Hangzhou, Zhejiang Province, China / by: (Electronic resources)

Advancement in materials processing technology = select proceedings of AMPT 2020 / by: (Electronic resources)

Hydrogen in engineering metallic materials = from atomic-level interactions to mechanical properties / by: (Electronic resources)

Silicon sensors and actuators = the feynman roadmap / by: (Electronic resources)

Advances in manufacturing III.. Volume 4,. Measurement and control systems: research and technology innovations, Industry 4.0 by: (Electronic resources)

Proceedings of the 7th International Conference on Nanomanufacturing (nanoMan2021) by: (Electronic resources)

Advances in mechanical engineering and material science = select proceedings of ICAMEMS-2022 / by: (Electronic resources)

Recent trends in design, materials and manufacturing = selected proceedings of ICRADMM 2020 / by: (Electronic resources)

Advanced nanomaterials by: (Electronic resources)

Materials design and applications IV by: (Electronic resources)

Green-based nanocomposite materials and applications by: (Electronic resources)

Multifunctional epoxy resins = self-healing, thermally and electrically conductive resins / by: (Electronic resources)

Materials, design and manufacturing for sustainable environment = select proceedings of ICMDMSE 2022 / by: (Electronic resources)

Probability-based multi-objective optimization for material selection by: (Electronic resources)

Proceedings of the Munich Symposium on Lightweight Design 2021 = Tagungsband zum Münchner Leichtbauseminar 2021 / by: (Electronic resources)

Modern hydroforming technology by: (Electronic resources)

Advances in functional and smart materials = select proceedings of ICFMMP 2021 / by: (Electronic resources)

Sustainable chemical, mineral and material processing = select proceedings of 74th Annual Session of Indian Institute of Chemical Engineers (CHEMCON-2021) / by: (Electronic resources)

Minimum quantity lubrication machining = process analysis and analytical modeling / by: (Electronic resources)

Road planning - freeways and country roads by: (Electronic resources)

Emerging trends in mechanical and industrial engineering = select proceedings of ICETMIE 2022 / by: (Electronic resources)

Structural integrity and monitoring for composite materials by: (Electronic resources)

Physicochemical aspects of metal-organic frameworks = a new class of coordinative materials / by: (Electronic resources)

Advancements in materials science and technology led by women by: (Electronic resources)

Resource recovery and recycling from waste metal dust by: (Electronic resources)

Thin films = processes and characterization techniques / by: (Electronic resources)

Key basic scientific problems on near-space vehicles by: (Electronic resources)

Metal micro-droplet based 3D printing technology by: (Electronic resources)

Springer handbook of advanced catalyst characterization by: (Electronic resources)

Chemical engineering principles and applications by: (Electronic resources)

Advances in design, simulation and manufacturing VI. = proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6-9, 2023, High Tatras, Slovak Republic /. Volume 2,. Mechanical and materials engineering by: (Electronic resources)

Progress in engineering technology V by: (Electronic resources)

Epoxidised natural rubber = properties & applications / by: (Electronic resources)

Additive manufacturing = design, processes and applications / by: (Electronic resources)

Recent advances in materials and manufacturing technology = select proceedings of ICAMMT 2022 / by: (Electronic resources)

Engineered stability = the history of composite materials in the 19th and 20th Centuries / by: (Electronic resources)

Proceedings of the 8th International Conference on Mechanical, Automotive and Materials Engineering = CMAME 2022, 16-18 December, Hanoi, Vietnam / by: (Electronic resources)

Proceedings of the International Symposium on Lightweight and Sustainable Polymeric Materials (LSPM23) by: (Electronic resources)

Proceedings of the 3rd International Conference on Microplastic Pollution in the Mediterranean Sea by: (Electronic resources)

Progress in continuum mechanics by: (Electronic resources)

Proceedings of the 28th International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2022 = ICEC28-ICMC 2022, Hangzhou, China / by: (Electronic resources)

Vanadium-based nanomaterials for electrochemical energy storage by: (Electronic resources)

Materialising the future = a learning path to understand, develop and apply emerging materials and technologies / by: (Electronic resources)

Solutions manual to accompany Transport phenomena in materials processing by: (Electronic resources)

CFD modeling and simulation in materials processing 2016 = proceedings of a symposium sponsored by the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th annual meeting & exhibition, Februrary 14-18, Downton Nashville, Tennessee Music City Center / by: (Electronic resources)

Light metals 2013 = proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA March 3-7, 2013 / by: (Electronic resources)

Manufacturing automotive components from sustainable natural fiber composites by: (Electronic resources)

Fiberglass science and technology = chemistry, characterization, processing, modeling, application, and sustainability / by: (Electronic resources)

Practical approach to 3D weaving by: (Electronic resources)

Textile and fashion education internationalization = a promising discipline from Southeast Asia / by: (Electronic resources)

Electron microscopy in science and engineering by: (Electronic resources)

Advanced materials and engineering technologies by: (Electronic resources)

Characterization of nanomaterials in liquid disperse systems by: (Electronic resources)

Carbon composite catalysts = preparation, structural and morphological property and applications / by: (Electronic resources)

Materials, structures and manufacturing for aircraft by: (Electronic resources)

Precision forging technology and equipment for aluminum alloy by: (Electronic resources)

Hydrogen assisted direct reduction of iron oxides by: (Electronic resources)

Advances in manufacturing III.. Volume 1,. Mechanical engineering: research and technology innovations, Industry 4.0 by: (Electronic resources)

Additive, subtractive, and hybrid technologies = recent innovations in manufacturing / by: (Electronic resources)

Mechanism-based assessment of structural and functional behavior of sustainable cottonid by: (Electronic resources)

Electron beam wire deposition technology and its application by: (Electronic resources)

Advances in design, simulation and manufacturing V = proceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland.. Volume 1,. Manufacturing and materials engineering / by: (Electronic resources)

Recent advances in materials and modern manufacturing = select proceedings of ICAMMM 2021 / by: (Electronic resources)

Advanced transdisciplinary engineering and technology by: (Electronic resources)

2021 International Conference on Development and Application of Carbon Nanomaterials in Energetic Materials by: (Electronic resources)

Advanced engineering of materials through lasers by: (Electronic resources)

Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia by: (Electronic resources)

Novel lights sources beyond free electron lasers by: (Electronic resources)

Flexible OLEDs = fundamental and novel practical technologies / by: (Electronic resources)

Future landscape of structural materials in India by: (Electronic resources)

Reference materials in measurement and technology = proceedings of the fourth International Scientific Conference / by: (Electronic resources)

Chitin and chitosan = science and engineering / by: (Electronic resources)

Flexible metal forming technologies = principles, process and equipment / by: (Electronic resources)

Premetered coating methods = attractiveness and limitations / by: (Electronic resources)

Solid state engineering physics by: (Electronic resources)

Fire hazards of electrical cables by: (Electronic resources)

Theory and practice of thermal transient testing of electronic components by: (Electronic resources)

Advanced manufacturing processes IV = selected papers from the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), September 6-9, 2022, Odessa, Ukraine / by: (Electronic resources)

Advances in mechanical and energy technology = select proceedings of ICMET 2021 / by: (Electronic resources)

Design and modeling of mechanical systems - V = proceedings of the 9th Conference on Design and Modeling of Mechanical Systems, CMSM'2021, December 20-22, 2021, Hammamet, Tunisia / by: (Electronic resources)

Proceedings of the 7th International Corrosion Prevention Symposium for Research Scholars = CORSYM 2021, November 2021 / by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of ERCAM 2021 / by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of ICOME 2021 / by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of CAMSE 2021 / by: (Electronic resources)

Slag-steel reaction and control of inclusions in Al deoxidized special steel by: (Electronic resources)

Recent trends in product design and intelligent manufacturing systems = select proceedings of IPDIMS 2021 / by: (Electronic resources)

Reinforced concrete = basic theory and standards / by: (Electronic resources)

Recent developments in mechanics and design = select proceedings of INCOME 2021 / by: (Electronic resources)

Friction stir welding and processing XII by: (Electronic resources)

Fiber reinforced polymeric materials and sustainable structures by: (Electronic resources)

Proceedings of the 2nd International Conference on Water Energy Food and Sustainability (ICoWEFS 2022) by: (Electronic resources)

Crystallographic texture and group representations by: (Electronic resources)

Recent advances in manufacturing engineering and processes = proceedings of ICMEP 2022 / by: (Electronic resources)

Manufacturing control of textile materials = operational computerized non-contact methods / by: (Electronic resources)

Proceedings of International Conference on Intelligent Manufacturing and Automation = ICIMA 2022 / by: (Electronic resources)

A two-dimensional piezoresistivity model for anisotropic materials and its application in self-sensing of carbon fiber reinforced plastics by: (Electronic resources)

Springer handbook of wood science and technology by: (Electronic resources)

Applications of high energy radiations = synthesis and processing of polymeric materials / by: (Electronic resources)

Advances in geoengineering, geotechnologies, and geoenvironment for earth systems and sustainable georesources management = proceedings of the 1st Conference on Georesources, Geomaterials, Geotechnologies and Geoenvironment (4GEO), Porto, 2019 / by: (Electronic resources)

Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering = ICAMME 2022, 9-10 August, Kuala Lumpur, Malaysia / by: (Electronic resources)

Advances in additive manufacturing and metal joining = proceedings of AIMTDR 2021 / by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of ICRAMERD 2022 / by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of FLAME 2022 / by: (Electronic resources)

Dissimilar metal joining by: (Electronic resources)

Multifunctional boron-nitride composites = preparation, properties and applications / by: (Electronic resources)

Electroslag remelting towards clean steel by: (Electronic resources)

Polymer 3D printing and 3D copying technology by: (Electronic resources)

Advancement of science and technology = materials and energy / by: (Electronic resources)

Modern optimization techniques for advanced machining = heuristic and metaheuristic techniques / by: (Electronic resources)

Recent advances in intelligent manufacturing = select proceedings of ICAME 2022 / by: (Electronic resources)

Advances in mechanics of materials for environmental and civil engineering by: (Electronic resources)

Emerging trends in materials research and manufacturing processes by: (Electronic resources)

Engineering design applications V = structures, materials and processes / by: (Electronic resources)

Thin-walled composite protective structures for crashworthiness applications = recent advances and future developments / by: (Electronic resources)

Semiconducting metal oxides for gas sensing by: (Electronic resources)

Proceedings of the 3rd annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).. Volume 1,. Advanced materials and manufacturing technologies by: (Electronic resources)

Nanomaterials based printed strain sensor for wearable health monitoring applications by: (Electronic resources)

Recycled polymer blends and composites = processing, properties, and applications / by: (Electronic resources)

Proceedings of the 6th Asia Pacific Conference on Manufacturing Systems and 4th International Manufacturing Engineering Conference = APCOMS-IMEC 2022, Surakarta, Indonesia / by: (Electronic resources)

Selected papers from ICIR EUROINVENT - 2023 = International Conference on Innovative Research / by: (Electronic resources)

Engineering design applications IV = structures, materials and processes / by: (Electronic resources)