Plastics Technology.

Impact of preservative treatments and fungal exposure on phenolic fiber reinforced polymer (FRP) composite material utilized in wood reinforcement. by: (書目-語言資料,印刷品)

Studies of novel chemical and physical properties for nanoscale conjugated polymers. by: (書目-語言資料,印刷品)

Hydrophobic and hydrophilic control in polyphosphazene materials. by: (書目-語言資料,印刷品)

Nonlinearly viscoelastic response of glassy polymers. by: (書目-電子資源)

Investigation of shear-induced migration of filler particles in molding flows. by: (書目-電子資源)

Durability of wood-plastic composites exposed to freeze-thaw cycling. by: (書目-電子資源)

Accelerated weathering performance of natural fiber plastic composites and its effect on the efficacy of the maleated anhydride coupling agents. by: (書目-電子資源)

Failure studies on rubber and rubber composites. by: (書目-電子資源)

A smart material from oligomers and polymers. by: (書目-電子資源)

Design and validation of melt valves in polymer processing, 2003--2004. by: (書目-電子資源)

On the molecular anisotropy of liquid crystalline and flexible polymer systems. by: (書目-電子資源)

Fundamentals of structuring during mixing and deformation of rubber compounds studied by real time sensing techniques. by: (書目-電子資源)

Interplay of martensitic phase transformation and plastic slip in polycrystals. by: (書目-語言資料,印刷品)

Conversion of woody biomass to polyhydroxybutyrate. by: (書目-電子資源)

Cosolvent effects in polymer-solvent systems. by: (書目-語言資料,印刷品)

Formation and growth of polyelectrolyte-surfactant complexes: An in-depth structural and thermodynamic investigation. by: (書目-語言資料,印刷品)

Role of nucleation and growth in two-phase microstructure formation. by: (書目-語言資料,印刷品)

Melt compounding and characterizations of polymer alumina nanocomposites. by: (書目-電子資源)

Fabrication of ceramic material with nanoscale features via soft lithography. by: (書目-電子資源)

Temperature dependence of polymer photovoltaic devices. by: (書目-電子資源)

Study of phase separation in blends of semi-flexible and flexible coil polymers. by: (書目-語言資料,印刷品)

Semi-crystalline polymer blends: Thermodynamics, morphology, and toughness enhancement. by: (書目-語言資料,印刷品)

Experimental and theoretical studies of reactive extrusion process in twin screw extruders: Formation of polycaprolactam and block copolymers. by: (書目-語言資料,印刷品)

In-line-measurement of the polymer melting behavior in single screw extruders. by: (書目-語言資料,印刷品)

The rheological behavior of carbon nanofiber-reinforced thermoplastic composites. by: (書目-語言資料,印刷品)

Nanomechanics and the viscoelastic behavior of carbon nanotube-reinforced polymers. by: (書目-語言資料,印刷品)

Simulation of mixing in single screw extrusion using the boundary integral method. by: (書目-語言資料,印刷品)

Investigation of transient flow and element analysis in modular intermeshing co-rotating twin screw extruders. by: (書目-語言資料,印刷品)

Investigation into the dynamic behavior of an injection molding non-return value. by: (書目-語言資料,印刷品)

Development of a computer model to evaluate the ability of plastics to act as functional barriers. by: (書目-語言資料,印刷品)

Single-walled carbon nanotube bucky paper/epoxy composites: Molecular dynamics simulation and process development. by: (書目-語言資料,印刷品)

Polysiloxanes for flame retardant applications. by: (書目-語言資料,印刷品)

Aspects of environmental degradation and fracture in polymer films and fibers. by: (書目-語言資料,印刷品)

Well-aligned 3-dimensional self-assembly in block copolymers and their nanotechnological applications. by: (書目-語言資料,印刷品)

Design of biodegradable aliphatic aromatic polyester films for agricultural applications using response surface methodology. by: (書目-語言資料,印刷品)

Biodegradable blends of poly (lactic acid) (PLA) / polyhydroxybutrate (PHB) copolymer and its effects on rheological, thermal and mechanical properties. by: (書目-語言資料,印刷品)

The use of plastic in utilitarian and functional design objects. by: (書目-語言資料,印刷品)

Electrical doping of organic molecular semiconductors. by: (書目-電子資源)

Fuzzy logic optimization of injection molding of liquid silicone rubber. by: (書目-電子資源)

Extension of sterolithography mold life using gas-assisted injection molding. by: (書目-電子資源)

Oxygen transport as a structure probe for amorphous polymeric systems. by: (書目-電子資源)

Structure-property relationships in semicrystalline copolymers and ionomers. by: (書目-電子資源)

The study of polymers in geometrically confined states by the thermal analysis, the spectroscopic study, and the morphological investigation. by: (書目-電子資源)

Three-dimensional finite element analysis of viscoelastic flow. by: (書目-電子資源)

In-situ X-ray characterization of polymer processing: Melt spinning of IPP. by: (書目-電子資源)

High numerical aperture injection-molded miniature objective for fiber-optic confocal reflectance microscopy. by: (書目-電子資源)

Photoluminescent polymer materials with built-in deformation and temperature sensors. by: (書目-電子資源)

Aplicacion del analisis de imagenes a la determinacion de la orientacion de fibra larga de vidrio en diferentes condiciones de proceso. by: (書目-電子資源)

PVDF-based semicrystalline-amorphous blends: Phase behavior and thermomechanical properties. by: (書目-電子資源)

Template assisted assembly of nanofibers. by: (書目-電子資源)

Multivariate process analysis for the prediction of injection molded part quality. by: (書目-電子資源)

Nanoscale composites assembled on electrospun fibrous membranes. by: (書目-電子資源)

Dynamic mechanical and thermal analysis of aligned vapor grown carbon nanofibers reinforced polyethylene. by: (書目-電子資源)

Process optimization and evaluation for a medical device application. by: (書目-電子資源)

Gate design guidelines for injection molding of thermoplastic elastomers. by: (書目-電子資源)

A study of high temperature structural foams of select engineering resins. by: (書目-電子資源)

Fire-safe polymers and polymer composites. by: (書目-電子資源)

Friction and wear properties of PET nanocomposites: The role of matrix morphology, nanoparticles and interface. by: (書目-電子資源)

Synthesis and characterization of functionalized methacrylates for coatings and biomedical applications. by: (書目-電子資源)

Morphology of ternary polymer blends containing a block copolymer as compatibilizing agent. by: (書目-電子資源)

Freeze-thawing of polyester/e-glass as an evaluation of an ASTM international test standard proposal. by: (書目-語言資料,印刷品)

Plastics Without Petroleum History and Politics of 'Green' Plastics in the United States. by: (書目-電子資源)

Development and characterization of ordered, highly oriented, composite laminates using supercritical carbon dioxide. by: (書目-語言資料,印刷品)

Development of high-performance diamine-based polybenzoxazines. by: (書目-語言資料,印刷品)

Photochemical Crosslinking Reactions in Polymers. by: (書目-語言資料,印刷品)

Tribology of polymeric coatings for aggressive bearing applications. by: (書目-語言資料,印刷品)

Scheduling optimization of manufacturing systems with no-wait constraints. by: (書目-語言資料,印刷品)

A reconfigurable tactile display based on polymer MEMS technology. by: (書目-語言資料,印刷品)

Polyvinyl alcohol size recovery and reuse via vacuum flash evaporation. by: (書目-電子資源)

Polymeric membranes for super critical carbon dioxide separations. by: (書目-電子資源)

Assembly, cross-linking and encapsulation using functionalized nanoparticles at liquid interfaces. by: (書目-電子資源)

Anionic synthesis of narrow molecular weight distribution poly(methyl methacrylate), poly(n-butyl acrylate), and poly(methyl methacrylate)-poly(n-butyl acrylate) block copolymers at elevated temperatures. by: (書目-電子資源)

Formation and thermodynamics of heteropolymers with adjustable monomer sequence distribution. by: (書目-電子資源)

In-mold transient measurements of thermal diffusivity for foams and filled materials using injection molded cylinders. by: (書目-語言資料,印刷品)

Investigation of internal water cooling on gas bubble behavior in the gas-assisted injection molding process. by: (書目-語言資料,印刷品)

Synthesis and characterization of polybutadiene-polyaniline core-shell microparticles. by: (書目-語言資料,印刷品)

Characteristics of poly(hydroxybutyrate-co-valerate) (PHBV) blends containing precipitated and ground calcium carbonates. by: (書目-語言資料,印刷品)

A new strategy to control the molecular weights and compositions of PHAS produced by Alcaligenes eutrophus (ATCC 17699) by the addition of poly(ethylene glycol) to the cultivation media. by: (書目-語言資料,印刷品)

Parylene for MEMS applications. by: (書目-語言資料,印刷品)

Bonding glass to metal with plastic for ultra stability. by: (書目-語言資料,印刷品)

Epoxy resin systems for light-emitting diode. by: (書目-語言資料,印刷品)

Optical applications of two-photon and microexplosion lithography. by: (書目-語言資料,印刷品)

Nonlinear rheology and strain recovery of short chain branched polyolefin elastomers and thermoplastic olefin blends. by: (書目-語言資料,印刷品)

In-line monitoring of melting and compounding phenomena of linear low density polyethylene (LLDPE) and polyvinyl chloride (PVC) compounds in an intermeshing counter-rotating twin-screw extruder by ultrasound waves. by: (書目-語言資料,印刷品)

Investigating the interfacial dynamics of thin films. by: (書目-語言資料,印刷品)

Evaluation of biodegradable and electrically conductive polymers based on polylactide and polypyrrole. by: (書目-語言資料,印刷品)

A study of the factors effecting layer thickness uniformity and layer breakup in microlayered coextruded films. by: (書目-語言資料,印刷品)

Development of environmentally-friendly plasticized poly (vinyl chloride)-based flooring formulations. by: (書目-語言資料,印刷品)

A study of the effect of plasticizers on compounding, processing, aging and mechanical properties of poly(vinyl chloride). by: (書目-語言資料,印刷品)

Permeation of hydrocarbons through HDPE and f-HDPE geomembranes. by: (書目-語言資料,印刷品)

Validation of a program that simulates flow in an extrusion die. by: (書目-語言資料,印刷品)

Birefringence and residual stresses in molded articles of amorphous polymers. by: (書目-語言資料,印刷品)

Nanoparticle reinforced core materials for sandwich construction: Investigation of mechanical and fracture behavior. by: (書目-語言資料,印刷品)

An electrostatic sieve feed system applied to the selective laser sintering process. by: (書目-語言資料,印刷品)

Analysis of plastics manufacturing processes for low production quantities. by: (書目-語言資料,印刷品)

An investigation of poly(lactic acid) and PEO-PPO-PEO block copolymer blends as biomaterials. by: (書目-語言資料,印刷品)

Rheological characterization of dispersion and interaction effects in supercritical carbon dioxide processed polymer-clay nanocomposites. by: (書目-語言資料,印刷品)

The toughening mechanisms in epoxy-silica nanocomposites and hybrid epoxy-silica-rubber nanocomposites. by: (書目-語言資料,印刷品)

Chemical modification of starch and preparation of starch-based nanocomposites. by: (書目-語言資料,印刷品)

Miscibility, morphology and biocompatibility studies of novel hemodialysis membranes with enhanced anti-oxidant and anti-inflammatory properties . by: (書目-語言資料,印刷品)

High barrier multilayer packaging by the coextrusion method: The effect of nanocomposites and biodegradable polymers on flexible film properties. by: (書目-語言資料,印刷品)

Studies on polycarbonate-modified epoxies. by: (書目-語言資料,印刷品)

Synthesis and applications of electrically conducting polymer nanocomposites. by: (書目-電子資源)

Initial stages of adhesion of Enterococcus faecalis responsible for biofilm formation on medical devices: Quantification of bacterial adhesion and measurement of cell-surface interaction forces. by: (書目-電子資源)

Experimental and theoretical investigations of polymerization-induced phase separation in modified epoxy composite materials and photonic crystals. by: (書目-電子資源)

Biostability of polyurethane elastomers: Pacemaker leads, effect of fatigue, and novel antioxidant stabilizers. by: (書目-電子資源)

MULTILAYER FILM COEXTRUSION OF MOLTEN POLYMERS. by: (書目-電子資源)

Interfacial stability analysis of multilayer viscoelastic fluids and its application to coextrusion processes. by: (書目-電子資源)

Draw resonance instability in coextrusion fiber spinning. by: (書目-電子資源)

Microlayer morphology via polymer melt processing. by: (書目-電子資源)

Analysis and design of annular dies for mono- and multi-layer polymer flows. by: (書目-電子資源)

Polymer-polymer adhesion in melt-processed multilayered structures. by: (書目-電子資源)

FEEDBLOCK DESIGN AND LABORATORY COEXTRUSION. by: (書目-電子資源)

Multilayer co-extrusion of biodegradable thermoplastics to study the effect of interfacial slip at polymer walls. by: (書目-電子資源)

Synthesis and properties of rubber-clay nanocomposites. by: (書目-電子資源)

Shear-induced crystallization of model polymers. by: (書目-電子資源)

Modeling and simulation of film blowing process. by: (書目-電子資源)

Rheology and morphology of a polypropylene/ethylene copolymer blend under channel flow. by: (書目-電子資源)

Modeling of molecular healing for micro-laser welding of plastics with diffractive optical elements as spatial modulators. by: (書目-電子資源)

Effect of recycling on material properties of polyethylene terephthalate at various recycling ratios and recycling generations. by: (書目-電子資源)

Promotion of adhesion between polymers and metals. by: (書目-電子資源)

Online flow rate estimation in injection molding. by: (書目-電子資源)

Single-wall carbon nanotube-polymer nanocomposites: Fabrication, processing, morphology, and properties. by: (書目-電子資源)

Rheology, processing, structure formation and mechanical properties of a medical-grade thermoplastic polyurethane and its suspensions. by: (書目-電子資源)

Effect of self-generated mechanical field on spatiotemporal growth of polymer single crystals, hedrites, and spherulites during isothermal crystallization. by: (書目-電子資源)

Analysis of constitutive equations of entangled polymers using flow birefringence in a time-dependent, axisymmetric flow. by: (書目-電子資源)

System modeling and material characterization for the design of nonimaging waveguide illumination systems. by: (書目-電子資源)

The effects of electron beam-cured coatings on polymer substrates. by: (書目-電子資源)

Clay-tethered thermoplastic polyurethane nanocomposites by bulk polymerization methods. by: (書目-電子資源)

Nickel salicylaldiminato catalysts for olefin polymerization in organic and aqueous media. by: (書目-電子資源)

Micromachined plastic millimeter-wave radar components. by: (書目-電子資源)

Synthesis, structure and properties of polymer nanocomposites. by: (書目-電子資源)

Rheology, phase transition, and morphology of ABA-type and ABC-type triblock copolymers. by: (書目-電子資源)

Characterization and control of exfoliation in melt-processed nanocomposites of polypropylene and clay. by: (書目-電子資源)

From synthesis to processing: Links between polymerization mechanism, molecular weight distribution, rheological behavior, and extrusion. by: (書目-電子資源)

TEMPO-mediated "living" free radical polymerization of styrene. by: (書目-電子資源)

Spinodal decomposition of liquid crystalline mixtures. by: (書目-電子資源)

Phase equilibrium and phase separation dynamics in polymer dispersed liquid crystals. by: (書目-電子資源)

Morphology and phase behavior of poly(ethylene oxide) blends: Crystallization from melt. by: (書目-電子資源)

In situ characterization of polymer blend mixing. by: (書目-電子資源)

Production of poly(3-hydroxyalkanoates) by extreme halophilic bacteria (Halogeometricum borinquense, Haloferax mediterranei). by: (書目-電子資源)

An all fiber-reinforced-polymer-composite bridge: Design, analysis, fabrication, full-scale experimental structural validation, construction and erection. by: (書目-電子資源)

Plastic product design case study. by: (書目-電子資源)

PLA/nanoclay cast film composites using various polymer-clay concentrates. by: (書目-電子資源)

Injection molding control: From process to quality. by: (書目-電子資源)

An evaluation of foamed plastics lumber produced from scrap business machine housings (recycling). by: (書目-電子資源)

TEXTBOOK OF PLASTICS MOLD ENGINEERING. by: (書目-電子資源)

Vibration damping of polyurethane composites. by: (書目-電子資源)

Metallocene catalyst patent trends. by: (書目-電子資源)

The phase structure and phase behavior of polymer blends undergoing simple shear flow. by: (書目-電子資源)

Ripening mechanisms in binary polymer blends. by: (書目-電子資源)

Design of nanocomposite polymer coatings for MEMS applications. by: (書目-電子資源)

Acoustical characterization and parameter optimization of polymeric noise control materials. by: (書目-電子資源)

A microstructural model for flow-induced crystallization with applications to the simulation of polymer processes. by: (書目-電子資源)

Structure and properties of three-dimensional woven and woven/braided composites. by: (書目-電子資源)

A mechanics approach to the study of pressure sensitive adhesives and human skin for transdermal drug delivery applications. by: (書目-電子資源)

Two-component co-injection and transfer molding and gas-assisted injection molding of polymers: Simulation and experiment. by: (書目-電子資源)

Short screw designs for the MuCell process. by: (書目-電子資源)

Rheological strategies for efficient purging in injection molding. by: (書目-電子資源)

Mechanical behavior and performance of injection molded semi-crystalline polymers. by: (書目-電子資源)

Corrosion inhibition for an aluminum substrate bonded with an electrically conductive adhesive. by: (書目-電子資源)

Solid-shape energy fuels from recyclable municipal solid waste and plastics. by: (書目-語言資料,印刷品)

The study of ionic liquids and carbon nanotubes to reduce friction and wear in PS, PC and PMMA. by: (書目-語言資料,印刷品)