東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Exploration of the Lean Limit in a S...

Bello, Steven Dal.

FindBook

Google Book

Amazon

博客來

Exploration of the Lean Limit in a Split-Cycle Engine.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Exploration of the Lean Limit in a Split-Cycle Engine./
作者:	Bello, Steven Dal.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2019,
面頁冊數:	121 p.
附註:	Source: Masters Abstracts International, Volume: 80-09.
Contained By:	Masters Abstracts International80-09.
標題:	Automotive engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13428328
ISBN:	9780438893382

Exploration of the Lean Limit in a Split-Cycle Engine.
Bello, Steven Dal.

Exploration of the Lean Limit in a Split-Cycle Engine. - Ann Arbor : ProQuest Dissertations & Theses, 2019 - 121 p.

Source: Masters Abstracts International, Volume: 80-09.

Thesis (M.A.Sc.)--University of Windsor (Canada), 2019.

This item must not be sold to any third party vendors.

With increasing focus on efficiency and reduction of greenhouse gases, combustion processes need to be improve. Whether through use of alternative fuel or alternative combustion cycles, improvements to the combustion process are desired. Natural gas composed primarily of methane is an alternative fuel for internal combustion engines that has a potential to meet these goals. It has a high octane number, reduced CO2 output and lower emissions than other gases. Natural gas has a low laminar flame speed, making its implementation in internal combustion engines challenging. A split-cycle engine has been constructed at the University of Windsor to address issues typical of natural gas combustion. The architecture promotes intense turbulence leading to improved burn rates. Testing on the split-cycle has shown burn durations under 30°CA, amongst the fastest for natural gas engines presented in literature. This work will address two issues with the split-cycle engine, the high lean limit of operation and the low loads achieved by the engine. The lean limit of operation is extended using a dual coil ignition strategy, increasing energy input to the kernel, thereby increasing stability. Secondly, it has been shown that early exhaust valve closure results in excessive combustion products being in-cylinder, resulting in 15-25% charge dilution. A change in exhaust valve timing is shown to effect the lean limit of operation. Low loads are attempted to be addressed with a change of valve timing. The valve timing change results in improved combustion parameters yet poorer indicated output. This cause of this issue is determined using a mass balance analysis which shows that the mass ow rate through the system is partially dependent on the mass transfer from the crossover passage, which should be optimized for the best performance for this type of engine. A new parameter that is used to characterize split-cycle engine performance, the mass compressed ratio, is defined in this work.

ISBN: 9780438893382Subjects--Topical Terms:

2181195
Automotive engineering.
Subjects--Index Terms:

Combustion

Exploration of the Lean Limit in a Split-Cycle Engine.
LDR:03203nmm a2200397 4500 001 2267768
005 20200821052159.5
008 220629s2019 ||||||||||||||||| ||eng d
020 $a 9780438893382
035 $a (MiAaPQ)AAI13428328
035 $a (MiAaPQ)uwindsor:12012
035 $a AAI13428328
040 $a MiAaPQ $c MiAaPQ
100 1 $a Bello, Steven Dal. $3 3545029
245 1 0 $a Exploration of the Lean Limit in a Split-Cycle Engine.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 121 p.
500 $a Source: Masters Abstracts International, Volume: 80-09.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Sobiesiak, Andrzej.
502 $a Thesis (M.A.Sc.)--University of Windsor (Canada), 2019.
506 $a This item must not be sold to any third party vendors.
520 $a With increasing focus on efficiency and reduction of greenhouse gases, combustion processes need to be improve. Whether through use of alternative fuel or alternative combustion cycles, improvements to the combustion process are desired. Natural gas composed primarily of methane is an alternative fuel for internal combustion engines that has a potential to meet these goals. It has a high octane number, reduced CO2 output and lower emissions than other gases. Natural gas has a low laminar flame speed, making its implementation in internal combustion engines challenging. A split-cycle engine has been constructed at the University of Windsor to address issues typical of natural gas combustion. The architecture promotes intense turbulence leading to improved burn rates. Testing on the split-cycle has shown burn durations under 30°CA, amongst the fastest for natural gas engines presented in literature. This work will address two issues with the split-cycle engine, the high lean limit of operation and the low loads achieved by the engine. The lean limit of operation is extended using a dual coil ignition strategy, increasing energy input to the kernel, thereby increasing stability. Secondly, it has been shown that early exhaust valve closure results in excessive combustion products being in-cylinder, resulting in 15-25% charge dilution. A change in exhaust valve timing is shown to effect the lean limit of operation. Low loads are attempted to be addressed with a change of valve timing. The valve timing change results in improved combustion parameters yet poorer indicated output. This cause of this issue is determined using a mass balance analysis which shows that the mass ow rate through the system is partially dependent on the mass transfer from the crossover passage, which should be optimized for the best performance for this type of engine. A new parameter that is used to characterize split-cycle engine performance, the mass compressed ratio, is defined in this work.
590 $a School code: 0115.
650 4 $a Automotive engineering. $3 2181195
650 4 $a Mechanical engineering. $3 649730
653 $a Combustion
653 $a Engine
653 $a Lean limit
653 $a Methane
653 $a Natural gas
653 $a Split-cycle
690 $a 0540
690 $a 0548
710 2 $a University of Windsor (Canada). $b Mechanical, Automotive and Materials Engineering. $3 3177227
773 0 $t Masters Abstracts International $g 80-09.
790 $a 0115
791 $a M.A.Sc.
792 $a 2019
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13428328