語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Design and Modeling of an Electrosta...
~
Aryal, Niwit .
FindBook
Google Book
Amazon
博客來
Design and Modeling of an Electrostatically Actuated Mems Micromirror for Light Detection and Ranging.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Design and Modeling of an Electrostatically Actuated Mems Micromirror for Light Detection and Ranging./
作者:
Aryal, Niwit .
出版者:
Ann Arbor : ProQuest Dissertations & Theses, : 2020,
面頁冊數:
110 p.
附註:
Source: Masters Abstracts International, Volume: 81-09.
Contained By:
Masters Abstracts International81-09.
標題:
Automotive engineering. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27668846
ISBN:
9781392484739
Design and Modeling of an Electrostatically Actuated Mems Micromirror for Light Detection and Ranging.
Aryal, Niwit .
Design and Modeling of an Electrostatically Actuated Mems Micromirror for Light Detection and Ranging.
- Ann Arbor : ProQuest Dissertations & Theses, 2020 - 110 p.
Source: Masters Abstracts International, Volume: 81-09.
Thesis (M.A.Sc.)--University of Windsor (Canada), 2020.
This item must not be sold to any third party vendors.
A Light Detection and Ranging (LIDAR) system, which is one of the promising technologies for autonomous vehicles, contains many miniature micromachined devices. The micromirror is one of the key components inside the LIDAR system that contributes to the performance of LIDAR. The "stroke" level of the micromirror affects the performance of the micromirror and hence the LIDAR. Therefore, this research focuses on a new approach to increase the level of stroke of the micromirror in an effort to enhance the device properties. In this thesis, four different design configurations of micromirrors are proposed and developed. The proposed micromirrors are based on dynamically-moving capacitor concepts that are actuated using electrostatic actuation. Unlike traditional micromirrors, the developed micromirrors employ three bottom electrodes, which enforces an upward deflection and, therefore, reduces the pull-in instability effect and improves the stroke of the micromirror. Critical design parameters of the micromirror that affect the stroke are studied to develop the four proposed designs. The PolyMUMPs fabrication technique is chosen to fabricate all four proposed micromirror designs. When the micromirror is fabricated using the PolyMUMPs fabrication technique, without any modification in the fabrication steps, the maximum achievable air cavity between the parallel plates is 2.0µm. However, in this thesis, in an unconventional way, the air cavity is increased from 2.0µm to 2.75µm. This is achieved by combining two oxide layers in the fabrication process. In this new design, a high stroke level of 5.07µm is achieved that, in return, will further enhance the performance of the LIDAR. COMSOL Multiphysics software and the MEMS module are used to investigate and analyze the performance of the proposed micromirrors and compare them with conventional MEMS micromirrors.
ISBN: 9781392484739Subjects--Topical Terms:
2181195
Automotive engineering.
Subjects--Index Terms:
Electrostatic actuation
Design and Modeling of an Electrostatically Actuated Mems Micromirror for Light Detection and Ranging.
LDR
:03070nmm a2200373 4500
001
2267624
005
20200724103018.5
008
220629s2020 ||||||||||||||||| ||eng d
020
$a
9781392484739
035
$a
(MiAaPQ)AAI27668846
035
$a
AAI27668846
040
$a
MiAaPQ
$c
MiAaPQ
100
1
$a
Aryal, Niwit .
$3
3544881
245
1 0
$a
Design and Modeling of an Electrostatically Actuated Mems Micromirror for Light Detection and Ranging.
260
1
$a
Ann Arbor :
$b
ProQuest Dissertations & Theses,
$c
2020
300
$a
110 p.
500
$a
Source: Masters Abstracts International, Volume: 81-09.
500
$a
Advisor: Emadi, Arezoo.
502
$a
Thesis (M.A.Sc.)--University of Windsor (Canada), 2020.
506
$a
This item must not be sold to any third party vendors.
520
$a
A Light Detection and Ranging (LIDAR) system, which is one of the promising technologies for autonomous vehicles, contains many miniature micromachined devices. The micromirror is one of the key components inside the LIDAR system that contributes to the performance of LIDAR. The "stroke" level of the micromirror affects the performance of the micromirror and hence the LIDAR. Therefore, this research focuses on a new approach to increase the level of stroke of the micromirror in an effort to enhance the device properties. In this thesis, four different design configurations of micromirrors are proposed and developed. The proposed micromirrors are based on dynamically-moving capacitor concepts that are actuated using electrostatic actuation. Unlike traditional micromirrors, the developed micromirrors employ three bottom electrodes, which enforces an upward deflection and, therefore, reduces the pull-in instability effect and improves the stroke of the micromirror. Critical design parameters of the micromirror that affect the stroke are studied to develop the four proposed designs. The PolyMUMPs fabrication technique is chosen to fabricate all four proposed micromirror designs. When the micromirror is fabricated using the PolyMUMPs fabrication technique, without any modification in the fabrication steps, the maximum achievable air cavity between the parallel plates is 2.0µm. However, in this thesis, in an unconventional way, the air cavity is increased from 2.0µm to 2.75µm. This is achieved by combining two oxide layers in the fabrication process. In this new design, a high stroke level of 5.07µm is achieved that, in return, will further enhance the performance of the LIDAR. COMSOL Multiphysics software and the MEMS module are used to investigate and analyze the performance of the proposed micromirrors and compare them with conventional MEMS micromirrors.
590
$a
School code: 0115.
650
4
$a
Automotive engineering.
$3
2181195
650
4
$a
Biomedical engineering.
$3
535387
653
$a
Electrostatic actuation
653
$a
LIDAR
653
$a
MEMS micromirror
653
$a
PolyMUMPs
653
$a
repulsive electrostatic actuation
653
$a
stroke
690
$a
0540
690
$a
0541
710
2
$a
University of Windsor (Canada).
$b
ELECTRICAL ENGINEERING.
$3
3170707
773
0
$t
Masters Abstracts International
$g
81-09.
790
$a
0115
791
$a
M.A.Sc.
792
$a
2020
793
$a
English
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27668846
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9419858
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入