東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Control of a climbing robot using re...

Miller, Teresa G.

FindBook

Google Book

Amazon

博客來

Control of a climbing robot using real-time convex optimization.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Control of a climbing robot using real-time convex optimization./
作者:	Miller, Teresa G.
面頁冊數:	122 p.
附註:	Adviser: Stephen Rock.
Contained By:	Dissertation Abstracts International68-12B.
標題:	Engineering, Electronics and Electrical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3292395
ISBN:	9780549355571

Control of a climbing robot using real-time convex optimization.
Miller, Teresa G.

Control of a climbing robot using real-time convex optimization. - 122 p.

Adviser: Stephen Rock.

Thesis (Ph.D.)--Stanford University, 2008.

This dissertation describes a controller and a control framework to enable a robot to rock climb.

ISBN: 9780549355571Subjects--Topical Terms:

626636
Engineering, Electronics and Electrical.

Control of a climbing robot using real-time convex optimization.
LDR:04045nam 2200349 a 45 001 956509
005 20110624
008 110624s2008 ||||||||||||||||| ||eng d
020 $a 9780549355571
035 $a (UMI)AAI3292395
035 $a AAI3292395
040 $a UMI $c UMI
100 1 $a Miller, Teresa G. $3 1279975
245 1 0 $a Control of a climbing robot using real-time convex optimization.
300 $a 122 p.
500 $a Adviser: Stephen Rock.
500 $a Source: Dissertation Abstracts International, Volume: 68-12, Section: B, page: 8264.
502 $a Thesis (Ph.D.)--Stanford University, 2008.
520 $a This dissertation describes a controller and a control framework to enable a robot to rock climb.
520 $a With these constraints and advantages in mind, a controller is proposed here that calculates motor inputs which satisfy the constraints, follow a planned path, and use the extra degrees of freedom to improve the robot's robustness.
520 $a The specific application that motivated this research is the exploration of cliff sites on Mars. These steep slopes are of particular interest to researchers because it is believed that they are the most likely location to find evidence of water on Mars. In order to climb these surfaces without disturbing them, a robot will need to carefully pick its way across irregular terrain while utilizing the frictional properties of the surface and being careful not to fall.
520 $a A robot climbing in such a scenario is heavily constrained. It has limited torque capabilities, needs to monitor the force conditions in each hand to be sure it's not about to slip off its holds, and must deal with uncertainties in both the state of the robot itself and of the environment its climbing in. A climbing robot also has more actuators than positional degrees of freedom, meaning the motors can be used to accomplish many tasks. For example, they can maintain the robot's position, adjust the forces at each hand to make sure they don't slip, and balance the forces among all the arms.
520 $a This controller is set in a framework that includes a number of different parts. First, a time is associated with a set of statically stable waypoints that define a route up a wall in order to determine how quickly the robot can feasibly climb. The desired route is then compared with the actual robot body position, which is estimated via a Non-Linear Least Squares (NLLS) technique. A Cartesian controller computes a desired body force and then this force is checked to see if is allowable (i.e., it won't make the robot jump). The body force is then converted to joint torques by using a Linear Program convex optimization technique. This optimization includes all the constraints and objectives of the robot phrased as linear constraints with a linear objective function designed to make the robot more robust. The Cartesian controller, dynamic feasibility check and LP together are called Cartesian Force Convex (CFC) control.
520 $a Also included as part of this control technique is a Finite State Machine (FSM) to switch between modes of control when hands become free of their holds or are making and breaking contact. Furthermore, since command of joint torques is a key part of this control, techniques for estimating the torque in each joint are described for both direct drive motors and geared motors with tip force sensors.
520 $a This control framework is demonstrated on three robotic platforms. These are JPL's LEMUR robot, the Free-flyer robot, and the Capuchin robot. The experiments and simulations on these platforms demonstrate the controller's ability to operate in real time and to make a robot climb relatively quickly through irregularly placed, difficult, and uncertain terrain.
590 $a School code: 0212.
650 4 $a Engineering, Electronics and Electrical. $3 626636
650 4 $a Engineering, Robotics. $3 1018454
690 $a 0544
690 $a 0771
710 2 $a Stanford University. $3 754827
773 0 $t Dissertation Abstracts International $g 68-12B.
790 $a 0212
790 1 0 $a Rock, Stephen, $e advisor
791 $a Ph.D.
792 $a 2008
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3292395