東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

The design and implementation of a f...

Gamache, Lisa M.

FindBook

Google Book

Amazon

博客來

The design and implementation of a friction test apparatus based on the thermostamping process of woven-fabric composites.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	The design and implementation of a friction test apparatus based on the thermostamping process of woven-fabric composites./
作者:	Gamache, Lisa M.
面頁冊數:	191 p.
附註:	Adviser: James A. Sherwood.
Contained By:	Masters Abstracts International46-02.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1447823
ISBN:	9780549193708

The design and implementation of a friction test apparatus based on the thermostamping process of woven-fabric composites.
Gamache, Lisa M.

The design and implementation of a friction test apparatus based on the thermostamping process of woven-fabric composites. - 191 p.

Adviser: James A. Sherwood.

Thesis (M.S.)--University of Massachusetts Lowell, 2007.

The effects of processing parameters on the friction coefficient between woven-fabric composites and the steel tool during the thermostamping process were studied.

ISBN: 9780549193708Subjects--Topical Terms:

783786
Engineering, Mechanical.

The design and implementation of a friction test apparatus based on the thermostamping process of woven-fabric composites.
LDR:02445nam 2200289 a 45 001 949252
005 20110525
008 110525s2007 ||||||||||||||||| ||eng d
020 $a 9780549193708
035 $a (UMI)AAI1447823
035 $a AAI1447823
040 $a UMI $c UMI
100 1 $a Gamache, Lisa M. $3 1272633
245 1 4 $a The design and implementation of a friction test apparatus based on the thermostamping process of woven-fabric composites.
300 $a 191 p.
500 $a Adviser: James A. Sherwood.
500 $a Source: Masters Abstracts International, Volume: 46-02, page: 1111.
502 $a Thesis (M.S.)--University of Massachusetts Lowell, 2007.
520 $a The effects of processing parameters on the friction coefficient between woven-fabric composites and the steel tool during the thermostamping process were studied.
520 $a During the thermostamping process, fabric in-plane forces are developed as a result of the friction between the fabric and tool, and controlling these in-plane forces is important to the manufacture of quality parts while achieving efficient manufacturing cycle times. A test apparatus was designed for measuring both the static and dynamic coefficients of friction. Based on this research, the coefficient of friction was found to increase with increasing velocity and decreasing normal force. The tool-temperature results suggest that a tool temperature where the friction between the tool and fabric is minimized exists in the room temperature to 140°C range. The tool temperature was found to lower the fabric temperature significantly upon contact such that the resin layer is a quasi-solid rather than a fluid under the binder plate during thermostamping. The static coefficient of friction measured with a force-control method was typically lower than the coefficient measured with a position-control method. Processing parameters such as fabric temperature coming out of the oven, sample transfer time, and rate of normal-force application influence the degree of consolidation. An alternate test method was explored that includes an isothermal condition between the fabric and tool. The importance of boundary conditions is discussed.
590 $a School code: 0111.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Textile Technology. $3 1020710
690 $a 0548
690 $a 0994
710 2 $a University of Massachusetts Lowell. $3 1017839
773 0 $t Masters Abstracts International $g 46-02.
790 $a 0111
790 1 0 $a Sherwood, James A., $e advisor
791 $a M.S.
792 $a 2007
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1447823