東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Fabrication and field emission prope...

Wang, Peng.

FindBook

Google Book

Amazon

博客來

Fabrication and field emission properties of carbon nanotubes .

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Fabrication and field emission properties of carbon nanotubes ./
作者:	Wang, Peng.
面頁冊數:	150 p.
附註:	Adviser: Otto Zhou.
Contained By:	Dissertation Abstracts International68-03B.
標題:	Physics, Condensed Matter. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3257545

Fabrication and field emission properties of carbon nanotubes .
Wang, Peng.

Fabrication and field emission properties of carbon nanotubes . - 150 p.

Adviser: Otto Zhou.

Thesis (Ph.D.)--The University of North Carolina at Chapel Hill, 2007.

Research on the area of the fabrication of carbon nanotubes is fundamental and critical to the entire subject of carbon nanotubes. This dissertation describes an experiment to fabricate carbon nanotubes by the method of Microwave Plasma Enhanced Chemical Vapor Deposition (MPECVD) and the electron field emission properties of carbon nanotubes.Subjects--Topical Terms:

1018743
Physics, Condensed Matter.

Fabrication and field emission properties of carbon nanotubes .
LDR:02725nam 2200277 a 45 001 948224
005 20110524
008 110524s2007 ||||||||||||||||| ||eng d
035 $a (UMI)AAI3257545
035 $a AAI3257545
040 $a UMI $c UMI
100 1 $a Wang, Peng. $3 1271684
245 1 0 $a Fabrication and field emission properties of carbon nanotubes .
300 $a 150 p.
500 $a Adviser: Otto Zhou.
500 $a Source: Dissertation Abstracts International, Volume: 68-03, Section: B, page: 1693.
502 $a Thesis (Ph.D.)--The University of North Carolina at Chapel Hill, 2007.
520 $a Research on the area of the fabrication of carbon nanotubes is fundamental and critical to the entire subject of carbon nanotubes. This dissertation describes an experiment to fabricate carbon nanotubes by the method of Microwave Plasma Enhanced Chemical Vapor Deposition (MPECVD) and the electron field emission properties of carbon nanotubes.
520 $a A MPECVD system was built and used to fabricate the vertical aligned carbon nanotube film. Scanning electron microscope (SEM), Raman spectroscopy and transmission electron microscopy (TEM) were used to characterize the as-grown carbon nanotube samples. By using a metal-containing diblock copolymer catalyst, carbon nanotubes with a diameter of 4 to 7 nm were synthesized. The effect of growth parameters was studied and these parameters were optimized. The growth of high density (&sim; 109/cm2) and large coverage area (&sim; 1 cm2) carbon nanotube film on glass substrate at low growth temperature was realized. Based on a series of experiments, the effects of oxygen atoms and Ti/N underlayer on the growth were studied.
520 $a A series of experiments were evaluated to characterize the field emission properties of the various carbon nanotube cathodes. A simple technique of scratching the pattern surface by a cotton swab was found effective to activate more carbon nanotubes to emit. By using the techniques of photolithography and shadow mask, various carbon nanotube patterns were achieved in order to obtain high emission current density and a low threshold electric field. The lowest threshold electric field was found to be 2.3 V/um. The highest current density was found to be 2.2 mA/cm2 when the electric field was 4.7 V/um. Our work shows that it is feasible to provide greater control over the fabrication of carbon nanotubes so that more obstacles in the broad application of carbon nanotubes can be overcome.
590 $a School code: 0153.
650 4 $a Physics, Condensed Matter. $3 1018743
690 $a 0611
710 2 0 $a The University of North Carolina at Chapel Hill. $3 1017449
773 0 $t Dissertation Abstracts International $g 68-03B.
790 $a 0153
790 1 0 $a Zhou, Otto, $e advisor
791 $a Ph.D.
792 $a 2007
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3257545