東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Numerical modeling of gas recovery f...

Silpngarmlert, Suntichai.

FindBook

Google Book

Amazon

博客來

Numerical modeling of gas recovery from methane hydrate reservoirs.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Numerical modeling of gas recovery from methane hydrate reservoirs./
作者:	Silpngarmlert, Suntichai.
面頁冊數:	210 p.
附註:	Source: Dissertation Abstracts International, Volume: 68-05, Section: B, page: 3371.
Contained By:	Dissertation Abstracts International68-05B.
標題:	Energy. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3266205
ISBN:	9780549046202

Numerical modeling of gas recovery from methane hydrate reservoirs.
Silpngarmlert, Suntichai.

Numerical modeling of gas recovery from methane hydrate reservoirs. - 210 p.

Source: Dissertation Abstracts International, Volume: 68-05, Section: B, page: 3371.

Thesis (Ph.D.)--The Pennsylvania State University, 2007.

Class 1 hydrate deposits are characterized by a hydrate bearing layer underlain by a two phase, free-gas and water, zone. A Class 1 hydrate reservoir is more preferable than class 2 and class 3 hydrate accumulations because a small change of pressure and temperature can induce hydrate dissociation. In this study, production characteristics from class 1 methane-hydrate reservoirs by means of conventional depressurization technique are studied. In this work, the production characteristics and efficiency from different production strategies (mainly focused on a constant bottom-hole pressure production scheme) such as well-completion locations, well spacing, and production scheduling are investigated.

ISBN: 9780549046202Subjects--Topical Terms:

876794
Energy.

Numerical modeling of gas recovery from methane hydrate reservoirs.
LDR:03688nam 2200301 a 45 001 941769
005 20110519
008 110519s2007 ||||||||||||||||| ||eng d
020 $a 9780549046202
035 $a (UMI)AAI3266205
035 $a AAI3266205
040 $a UMI $c UMI
100 1 $a Silpngarmlert, Suntichai. $3 1265863
245 1 0 $a Numerical modeling of gas recovery from methane hydrate reservoirs.
300 $a 210 p.
500 $a Source: Dissertation Abstracts International, Volume: 68-05, Section: B, page: 3371.
502 $a Thesis (Ph.D.)--The Pennsylvania State University, 2007.
520 $a Class 1 hydrate deposits are characterized by a hydrate bearing layer underlain by a two phase, free-gas and water, zone. A Class 1 hydrate reservoir is more preferable than class 2 and class 3 hydrate accumulations because a small change of pressure and temperature can induce hydrate dissociation. In this study, production characteristics from class 1 methane-hydrate reservoirs by means of conventional depressurization technique are studied. In this work, the production characteristics and efficiency from different production strategies (mainly focused on a constant bottom-hole pressure production scheme) such as well-completion locations, well spacing, and production scheduling are investigated.
520 $a In the production of conventional gas reservoirs using a constant bottom-hole pressure production scheme, both gas and water production rates exponentially decrease with time. However, for methane-hydrate reservoirs, gas production rate exponentially declines with time whereas water production rate increases with time because methane hydrate dissociation increases water saturation of the reservoir.
520 $a The effects of well-completion locations on the production performances are examined. The simulation results indicate that the moving well completion location strategy provides better gas production performance than the fixed completion location strategy. The optimum well-completion location (using a moving completion location strategy) is at the middle of free-gas zone. Due to the effects of hydrate saturation on formation permeability, one should not complete a well in the hydrate zone.
520 $a The effect of well spacing on the production efficiency is also investigated. As expected, smaller well-spacing system yields more total gas production and it can dissociate gas-hydrate more rapidly than the larger well-spacing system. However, the number of wells increases when the well-spacing decreases resulting in the increase of the capital investment of the project. Based on this study, when the well-spacing increased about 100 percent (from 45.0 acres to 74.38 acres) the cumulative gas production decreased about 8.4 percent at 1,000 days of production. Therefore, once the similar simulation study for a particular reservoir has been performed, the optimum well spacing for a specific reservoir can be determined.
520 $a The effect of well scheduling on the production performance is also examined. In multiple-well systems, starting all production wells at the same time provides faster hydrate dissociation. However, based on this study, starting production wells at different times yields more produced gas (about 10 percent by volume) even though less gashydrate dissociates. Therefore, starting production wells in the multiple-well system at different times could help in improving the gas production efficiency.
590 $a School code: 0176.
650 4 $a Energy. $3 876794
650 4 $a Engineering, Petroleum. $3 1018448
690 $a 0765
690 $a 0791
710 2 $a The Pennsylvania State University. $3 699896
773 0 $t Dissertation Abstracts International $g 68-05B.
790 $a 0176
791 $a Ph.D.
792 $a 2007
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3266205