東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Development of helicopter attitude a...

Simon, Miguel.

FindBook

Google Book

Amazon

博客來

Development of helicopter attitude axes controlled hover flight without pilot assistance and vehicle crashes.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Development of helicopter attitude axes controlled hover flight without pilot assistance and vehicle crashes./
作者:	Simon, Miguel.
面頁冊數:	522 p.
附註:	Adviser: Harold L. Stalford.
Contained By:	Dissertation Abstracts International68-04B.
標題:	Engineering, Aerospace. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3261118

Development of helicopter attitude axes controlled hover flight without pilot assistance and vehicle crashes.
Simon, Miguel.

Development of helicopter attitude axes controlled hover flight without pilot assistance and vehicle crashes. - 522 p.

Adviser: Harold L. Stalford.

Thesis (Ph.D.)--The University of Oklahoma, 2007.

In this work, we show how to computerize a helicopter to fly attitude axes controlled hover flight without the assistance of a pilot and without ever crashing. We start by developing a helicopter research test bed system including all hardware, software, and means for testing and training the helicopter to fly by computer. We select a Remote Controlled helicopter with a 5 ft. diameter rotor and 2.2 hp engine. We equip the helicopter with a payload of sensors, computers, navigation and telemetry equipment, and batteries. We develop a differential GPS system with cm accuracy and a ground computerized navigation system for six degrees of freedom (6-DoF) free flight while tracking navigation commands. We design feedback control loops with yet-to-be-determined gains for the five control "knobs" available to a flying radio-controlled (RC) miniature helicopter: engine throttle, main rotor collective pitch, longitudinal cyclic pitch, lateral cyclic pitch, and tail rotor collective pitch.Subjects--Topical Terms:

1018395
Engineering, Aerospace.

Development of helicopter attitude axes controlled hover flight without pilot assistance and vehicle crashes.
LDR:04666nam 2200325 a 45 001 941756
005 20110519
008 110519s2007 ||||||||||||||||| ||eng d
035 $a (UMI)AAI3261118
035 $a AAI3261118
040 $a UMI $c UMI
100 1 $a Simon, Miguel. $3 1265847
245 1 0 $a Development of helicopter attitude axes controlled hover flight without pilot assistance and vehicle crashes.
300 $a 522 p.
500 $a Adviser: Harold L. Stalford.
500 $a Source: Dissertation Abstracts International, Volume: 68-04, Section: B, page: 2474.
502 $a Thesis (Ph.D.)--The University of Oklahoma, 2007.
520 $a In this work, we show how to computerize a helicopter to fly attitude axes controlled hover flight without the assistance of a pilot and without ever crashing. We start by developing a helicopter research test bed system including all hardware, software, and means for testing and training the helicopter to fly by computer. We select a Remote Controlled helicopter with a 5 ft. diameter rotor and 2.2 hp engine. We equip the helicopter with a payload of sensors, computers, navigation and telemetry equipment, and batteries. We develop a differential GPS system with cm accuracy and a ground computerized navigation system for six degrees of freedom (6-DoF) free flight while tracking navigation commands. We design feedback control loops with yet-to-be-determined gains for the five control "knobs" available to a flying radio-controlled (RC) miniature helicopter: engine throttle, main rotor collective pitch, longitudinal cyclic pitch, lateral cyclic pitch, and tail rotor collective pitch.
520 $a We develop helicopter flight equations using fundamental dynamics, helicopter momentum theory and blade element theory. The helicopter flight equations include helicopter rotor equations of motions, helicopter rotor forces and moments, helicopter trim equations, helicopter stability derivatives, and a coupled fuselage-rotor helicopter 6-DoF model. The helicopter simulation also includes helicopter engine control equations, a helicopter aerodynamic model, and finally helicopter stability and control equations. The derivation of a set of non-linear equations of motion for the main rotor is a contribution of this thesis work.
520 $a We design and build two special test stands for training and testing the helicopter to fly attitude axes controlled hover flight, starting with one axis at a time and progressing to multiple axes. The first test stand is built for teaching and testing controlled flight of elevation and yaw (i.e., directional control). The second test stand is built for teaching and testing any one or combination of the following attitude axes controlled flight: (1) pitch, (2) roll and (3) yaw. The subsequent development of a novel method to decouple, stabilize and teach the helicopter hover flight is a primary contribution of this thesis.
520 $a The novel method included the development of a non-linear modeling technique for linearizing the RPM state equation dynamics so that a simple but accurate transfer function is derivable between the "available torque of the engine" and RPM. Specifically, the main rotor and tail rotor torques are modeled accurately with a bias term plus a nonlinear term involving the product of RPM squared times the main rotor blade pitch angle raised to the three-halves power. Application of this non-linear modeling technique resulted in a simple, representative and accurate transfer function model of the open-loop plant for the entire helicopter system so that all the feedback control laws for autonomous flight purposes could be derived easily using classical control theory. This is one of the contributions of this dissertation work.
520 $a After discussing the integration of hardware and software elements of our helicopter research test bed system, we perform a number of experiments and tests using the two specially built test stands. Feedback gains are derived for controlling the following: (1) engine throttle to maintain prescribed main rotor angular speed, (2) main rotor collective pitch to maintain constant elevation, (3) longitudinal cyclic pitch to maintain prescribed pitch angle, (4) lateral cyclic pitch to maintain prescribed roll angle, and (5) yaw axis to maintain prescribed compass direction. (Abstract shortened by UMI.)
590 $a School code: 0169.
650 4 $a Engineering, Aerospace. $3 1018395
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Robotics. $3 1018454
690 $a 0538
690 $a 0548
690 $a 0771
710 2 $a The University of Oklahoma. $b School of Aerospace and Mechanical Engineering. $3 1265848
773 0 $t Dissertation Abstracts International $g 68-04B.
790 $a 0169
790 1 0 $a Stalford, Harold L., $e advisor
791 $a Ph.D.
792 $a 2007
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3261118