東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Design and analysis of photonic crys...

Sharkawy, Ahmed Samir.

FindBook

Google Book

Amazon

博客來

Design and analysis of photonic crystal devices for next generation telecommunication systems.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Design and analysis of photonic crystal devices for next generation telecommunication systems./
作者:	Sharkawy, Ahmed Samir.
面頁冊數:	220 p.
附註:	Professor: Dennis W. Prather.
Contained By:	Dissertation Abstracts International64-01B.
標題:	Engineering, Electronics and Electrical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3077906
ISBN:	0493985034

Design and analysis of photonic crystal devices for next generation telecommunication systems.
Sharkawy, Ahmed Samir.

Design and analysis of photonic crystal devices for next generation telecommunication systems. - 220 p.

Professor: Dennis W. Prather.

Thesis (Ph.D.)--University of Delaware, 2003.

Optical components that can permit the miniaturization of an Application Specific Photonic Integrated Circuit (ASPIC) to a scale comparable to the wavelength of light will be a good candidate for next generation high density optical interconnects and integration. In recent years, there has been a growing interest in the realization of photonic crystals (PhCs) or photonic band gap structures as optical components and circuits. In this dissertation I will apply available computational electromagnetics modeling and simulation techniques to develop and optimize application-specific photonic integrated circuits (ASPIC) in photonic band-gap structures for near infrared or telecommunication applications which will be good candidates for next generation high-density optical computing systems and interconnects. The implication of this work is the ability to incorporate on-chip optical signal processing and routing, on a scale comparable to the wavelength of light. Currently, optical processing devices tend to have a scale much larger than the wavelength of light, which prohibits their use in “on-chip applications”. Devices presented include, channel drop/add filters, optical splitters/combiners, optical switch, chip-scale optical network with a novel implementation of an optical via. I also explored hybrid photonic crystal structures including heterostructures and polycrystalline structures. I used hybrid structures to enhance the performance of certain devices such as splitters/combiners as well as transmission through sharp waveguide bends where their functionality on a chip was hindered by the geometrical constraint of the lattice they were built on. I used both plane wave expansion method (PWM), and finite difference time domain (FDTD) method for both two- and three-dimensional structures with local or global periodicity.

ISBN: 0493985034Subjects--Topical Terms:

626636
Engineering, Electronics and Electrical.

Design and analysis of photonic crystal devices for next generation telecommunication systems.
LDR:02761nam 2200277 a 45 001 935014
005 20110509
008 110509s2003 eng d
020 $a 0493985034
035 $a (UnM)AAI3077906
035 $a AAI3077906
040 $a UnM $c UnM
100 1 $a Sharkawy, Ahmed Samir. $3 1258708
245 1 0 $a Design and analysis of photonic crystal devices for next generation telecommunication systems.
300 $a 220 p.
500 $a Professor: Dennis W. Prather.
500 $a Source: Dissertation Abstracts International, Volume: 64-01, Section: B, page: 0347.
502 $a Thesis (Ph.D.)--University of Delaware, 2003.
520 $a Optical components that can permit the miniaturization of an Application Specific Photonic Integrated Circuit (ASPIC) to a scale comparable to the wavelength of light will be a good candidate for next generation high density optical interconnects and integration. In recent years, there has been a growing interest in the realization of photonic crystals (PhCs) or photonic band gap structures as optical components and circuits. In this dissertation I will apply available computational electromagnetics modeling and simulation techniques to develop and optimize application-specific photonic integrated circuits (ASPIC) in photonic band-gap structures for near infrared or telecommunication applications which will be good candidates for next generation high-density optical computing systems and interconnects. The implication of this work is the ability to incorporate on-chip optical signal processing and routing, on a scale comparable to the wavelength of light. Currently, optical processing devices tend to have a scale much larger than the wavelength of light, which prohibits their use in “on-chip applications”. Devices presented include, channel drop/add filters, optical splitters/combiners, optical switch, chip-scale optical network with a novel implementation of an optical via. I also explored hybrid photonic crystal structures including heterostructures and polycrystalline structures. I used hybrid structures to enhance the performance of certain devices such as splitters/combiners as well as transmission through sharp waveguide bends where their functionality on a chip was hindered by the geometrical constraint of the lattice they were built on. I used both plane wave expansion method (PWM), and finite difference time domain (FDTD) method for both two- and three-dimensional structures with local or global periodicity.
590 $a School code: 0060.
650 4 $a Engineering, Electronics and Electrical. $3 626636
650 4 $a Health Sciences, Pharmacy. $3 1017737
690 $a 0544
690 $a 0572
710 2 0 $a University of Delaware. $3 1017826
773 0 $t Dissertation Abstracts International $g 64-01B.
790 $a 0060
790 1 0 $a Prather, Dennis W., $e advisor
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3077906