東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

A three-dimensional computer vision ...

Ji, Qiang.

FindBook

Google Book

Amazon

博客來

A three-dimensional computer vision system for inspecting the geometric tolerances of circular machine features.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	A three-dimensional computer vision system for inspecting the geometric tolerances of circular machine features./
作者:	Ji, Qiang.
面頁冊數:	241 p.
附註:	Chairperson: Robert M. Haralick.
Contained By:	Dissertation Abstracts International59-06B.
標題:	Computer Science. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9836192
ISBN:	0591896559

A three-dimensional computer vision system for inspecting the geometric tolerances of circular machine features.
Ji, Qiang.

A three-dimensional computer vision system for inspecting the geometric tolerances of circular machine features. - 241 p.

Chairperson: Robert M. Haralick.

Thesis (Ph.D.)--University of Washington, 1998.

In manufacturing, it is impossible to produce a part with ideal features. Manufactured features always exhibit geometric deviations from their nominal geometrical properties both for systematic and random reasons. Part inspection is therefore crucial to verify that the geometric deviations of the machined features remain within the tolerance limits. This research focuses on developing a three-dimensional (3D) machine vision system for inspecting the compliance of circular machine features to 3D geometric tolerances.

ISBN: 0591896559Subjects--Topical Terms:

626642
Computer Science.

A three-dimensional computer vision system for inspecting the geometric tolerances of circular machine features.
LDR:03409nam 2200313 a 45 001 927426
005 20110425
008 110425s1998 eng d
020 $a 0591896559
035 $a (UnM)AAI9836192
035 $a AAI9836192
040 $a UnM $c UnM
100 1 $a Ji, Qiang. $3 1250985
245 1 0 $a A three-dimensional computer vision system for inspecting the geometric tolerances of circular machine features.
300 $a 241 p.
500 $a Chairperson: Robert M. Haralick.
500 $a Source: Dissertation Abstracts International, Volume: 59-06, Section: B, page: 2940.
502 $a Thesis (Ph.D.)--University of Washington, 1998.
520 $a In manufacturing, it is impossible to produce a part with ideal features. Manufactured features always exhibit geometric deviations from their nominal geometrical properties both for systematic and random reasons. Part inspection is therefore crucial to verify that the geometric deviations of the machined features remain within the tolerance limits. This research focuses on developing a three-dimensional (3D) machine vision system for inspecting the compliance of circular machine features to 3D geometric tolerances.
520 $a Characterizing the compliance of a machined part to 3D geometric tolerances from its image involves the following basic issues: image feature extraction, 3D feature re-construction, error propagation, and tolerance inference. Feature extraction involves detecting two-dimensional (2D) geometric features from the part image. The detected features are used for measurement and camera calibration. Through this research, we have developed statistical techniques for extracting 2D features like corners, lines, and ellipses. Three-dimensional feature reconstruction is concerned with reconstructing the corresponding 3D features from the detected 2D features. This is necessary since dimensioning based on the 2D features may produce significant measurement errors due to geometrical distortion caused by the perspective projection. For 3D feature reconstruction, we have developed several techniques, including: an integrated technique for camera calibration, a constraint-based technique for 3D reconstruction from monocular images, an efficient and accurate technique for point matching, and an improved Bayesian triangulation technique for 3D reconstruction from multiple images.
520 $a Since an image is never noise free, tolerance measurements are subject to image errors. We have developed techniques for analytically studying the impact of image errors on the estimated camera parameters, the reconstructed 3D points, and on that estimated tolerance measurements. Finally, given the reconstructed 3D features, we introduce a statistical framework for modeling image and manufacturing errors and for statistically inferring the geometric tolerances.
520 $a We have demonstrated using two images for each part with a resolution of 512 x 384 over a field of width of 3 inch. the shape and size tolerances can be determined to within an average of 0.8 mm respectively, and the position tolerance to within an average of 1.5 mm.
590 $a School code: 0250.
650 4 $a Computer Science. $3 626642
650 4 $a Engineering, Electronics and Electrical. $3 626636
690 $a 0544
690 $a 0984
710 2 0 $a University of Washington. $3 545923
773 0 $t Dissertation Abstracts International $g 59-06B.
790 $a 0250
790 1 0 $a Haralick, Robert M., $e advisor
791 $a Ph.D.
792 $a 1998
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9836192