東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Distributed body-worn communication ...

Purdue University., Electrical and Computer Engineering.

FindBook

Google Book

Amazon

博客來

Distributed body-worn communication system with the use of electro-textiles.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Distributed body-worn communication system with the use of electro-textiles./
作者:	Ouyang, Yuehui.
面頁冊數:	143 p.
附註:	Adviser: William J. Chappell.
Contained By:	Dissertation Abstracts International70-01B.
標題:	Engineering, Electronics and Electrical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3344124

Distributed body-worn communication system with the use of electro-textiles.
Ouyang, Yuehui.

Distributed body-worn communication system with the use of electro-textiles. - 143 p.

Adviser: William J. Chappell.

Thesis (Ph.D.)--Purdue University, 2008.

Electro-textiles made by incorporating conductive threads into fabrics are as flexible and washable as normal fabrics, and some exhibit comparable conductivity to a solid metal laminate. Wearable antennas fabricated from these electro-textiles demonstrate high antenna efficiency (78%) and moderate bandwidth (4-8% at 2.4 GHz). To explore the advantage of a body-worn wireless communication system to address multipath fading problem, distributed signal reception can be realized through multiple wearable antennas at widely spaced locations on clothing. By taking advantage of antenna diversity techniques or MIMO (Multiple Input Multiple Output) techniques, such a system can effectively mitigate "signal drop" phenomenon in most wireless communication environment. Using theoretical modeling, numerical simulation and indoor channel measurements, the performance of the above multi-antenna transceiver system was fully evaluated. It was found that the combination of pattern diversity and spatial diversity can significantly improve system gain (8-12dB diversity gain in received signal strength, about 300% increase in 10% MIMO outage capacity) compared to conventional antennas in handheld devices. To achieve a truly wearable wireless system, it is necessary to integrate the wearable antennas with other RF and baseband circuit blocks. Here, we propose a distributed multi-transceiver integration with separate RF local oscillator for each receiver chain. The proposed design is compared with traditional designs with a single shared LO reference through system modeling and simulation.Subjects--Topical Terms:

626636
Engineering, Electronics and Electrical.

Distributed body-worn communication system with the use of electro-textiles.
LDR:02656nmm 2200313 a 45 001 887222
005 20101020
008 101020s2008 ||||||||||||||||| ||eng d
035 $a (UMI)AAI3344124
035 $a AAI3344124
040 $a UMI $c UMI
100 1 $a Ouyang, Yuehui. $3 1058955
245 1 0 $a Distributed body-worn communication system with the use of electro-textiles.
300 $a 143 p.
500 $a Adviser: William J. Chappell.
500 $a Source: Dissertation Abstracts International, Volume: 70-01, Section: B, page: 0559.
502 $a Thesis (Ph.D.)--Purdue University, 2008.
520 $a Electro-textiles made by incorporating conductive threads into fabrics are as flexible and washable as normal fabrics, and some exhibit comparable conductivity to a solid metal laminate. Wearable antennas fabricated from these electro-textiles demonstrate high antenna efficiency (78%) and moderate bandwidth (4-8% at 2.4 GHz). To explore the advantage of a body-worn wireless communication system to address multipath fading problem, distributed signal reception can be realized through multiple wearable antennas at widely spaced locations on clothing. By taking advantage of antenna diversity techniques or MIMO (Multiple Input Multiple Output) techniques, such a system can effectively mitigate "signal drop" phenomenon in most wireless communication environment. Using theoretical modeling, numerical simulation and indoor channel measurements, the performance of the above multi-antenna transceiver system was fully evaluated. It was found that the combination of pattern diversity and spatial diversity can significantly improve system gain (8-12dB diversity gain in received signal strength, about 300% increase in 10% MIMO outage capacity) compared to conventional antennas in handheld devices. To achieve a truly wearable wireless system, it is necessary to integrate the wearable antennas with other RF and baseband circuit blocks. Here, we propose a distributed multi-transceiver integration with separate RF local oscillator for each receiver chain. The proposed design is compared with traditional designs with a single shared LO reference through system modeling and simulation.
590 $a School code: 0183.
650 4 $a Engineering, Electronics and Electrical. $3 626636
650 4 $a Textile Technology. $3 1020710
690 $a 0544
690 $a 0994
710 2 $a Purdue University. $b Electrical and Computer Engineering. $3 1018497
773 0 $t Dissertation Abstracts International $g 70-01B.
790 $a 0183
790 1 0 $a Chappell, William J. $e committee member
790 1 0 $a Chappell, William J., $e advisor
790 1 0 $a Krogmeier, James V. $e committee member
790 1 0 $a Love, David J. $e committee member
790 1 0 $a Weiner, Andrew M. $e committee member
791 $a Ph.D.
792 $a 2008
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3344124