東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Computational modeling of failure in...

The Ohio State University.

FindBook

Google Book

Amazon

博客來

Computational modeling of failure in thermal barrier coatings under cyclic thermal loads.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Computational modeling of failure in thermal barrier coatings under cyclic thermal loads./
作者:	Bhatnagar, Himanshu.
面頁冊數:	219 p.
附註:	Adviser: Somnath Ghosh.
Contained By:	Dissertation Abstracts International70-02B.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3345827
ISBN:	9781109007794

Computational modeling of failure in thermal barrier coatings under cyclic thermal loads.
Bhatnagar, Himanshu.

Computational modeling of failure in thermal barrier coatings under cyclic thermal loads. - 219 p.

Adviser: Somnath Ghosh.

Thesis (Ph.D.)--The Ohio State University, 2008.

In this dissertation, finite element models are used to investigate catastrophic failure of thermal barrier coatings (TBCs) due to delaminations along susceptible interfaces of thermally grown oxide (TGO) with the ceramic top coat and the inter-metallic bond coat. The materials and geometries in the studies are chosen to be representative of TBC materials in real applications.

ISBN: 9781109007794Subjects--Topical Terms:

783786
Engineering, Mechanical.

Computational modeling of failure in thermal barrier coatings under cyclic thermal loads.
LDR:03692nmm 2200301 a 45 001 866988
005 20100802
008 100802s2008 ||||||||||||||||| ||eng d
020 $a 9781109007794
035 $a (UMI)AAI3345827
035 $a AAI3345827
040 $a UMI $c UMI
100 1 $a Bhatnagar, Himanshu. $3 872075
245 1 0 $a Computational modeling of failure in thermal barrier coatings under cyclic thermal loads.
300 $a 219 p.
500 $a Adviser: Somnath Ghosh.
500 $a Source: Dissertation Abstracts International, Volume: 70-02, Section: B, page: 1291.
502 $a Thesis (Ph.D.)--The Ohio State University, 2008.
520 $a In this dissertation, finite element models are used to investigate catastrophic failure of thermal barrier coatings (TBCs) due to delaminations along susceptible interfaces of thermally grown oxide (TGO) with the ceramic top coat and the inter-metallic bond coat. The materials and geometries in the studies are chosen to be representative of TBC materials in real applications.
520 $a The characteristics of the failure modes along the TGO and bond coat interface (e.g. buckling instability and strain energy driven delamination propagation) are investigated using thermo-elastic finite element models. The solution of a linear elastic eigen-value problem determines the onset of the buckling instability with a pre-existing delamination between bond coat and the TGO. The virtual crack extension method is employed to study strain energy release rate driven interfacial delamination at wavy interfaces. The materials and geometries in the study are chosen to be representative of TBC materials in real applications. Extensive sensitivity analyses are conducted to identify the critical design parameters affecting the onset of buckling and extension of interfacial delamination, as well as to develop parametric relations that enhance the understanding of these mechanisms. Finally, a numerical exercise demonstrates that the buckling instability is the leading failure mechanism at flat interfaces or at the locations of minimum cross-section in a wavy interface. However, in the vicinity of waviness, crack extension becomes a dominant mode of failure.
520 $a The top coat crack initiation and propagation is investigated using a thermo-elastic finite element model with bond coat creep. Cracks are assumed to initiate when the maximum principal stress exceeds rupture stress of the top coat. A sensitivity analysis estimates the contribution of geometric and material parameters and forms a basis to develop parametric relation to estimate maximum principal stress. Subsequently, crack propagation simulations using a hysteretic cohesive zone model are performed for parametric combinations which initiate cracks away from the interface. These analyses conclude that parametric combinations initiating top coat cracks also assist in propagation and eventual delamination of TGO and top coat interface.
520 $a A homogenization based continuum damage mechanics (HCDM) modeling framework is proposed for TBC failure effects of top coat microstructural defects. An extended Voronoi cell finite element (X-VCFEM) is employed to perform the micromechanical analysis of RVE and the results show that HCDM model has limited validity due to loss of material stability with significant damage. A sensitivity analysis reveals that the range of HCDM validity is dependent on top coat cohesive energy.
590 $a School code: 0168.
650 4 $a Engineering, Mechanical. $3 783786
690 $a 0548
710 2 $a The Ohio State University. $3 718944
773 0 $t Dissertation Abstracts International $g 70-02B.
790 $a 0168
790 1 0 $a Ghosh, Somnath, $e advisor
791 $a Ph.D.
792 $a 2008
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3345827