東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Evaluation of a pressure sensing arr...

The University of Wisconsin - Madison.

FindBook

Google Book

Amazon

博客來

Evaluation of a pressure sensing array for use with ultrasound strain imaging.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Evaluation of a pressure sensing array for use with ultrasound strain imaging./
作者:	Kiessel, Lee Mathew.
面頁冊數:	189 p.
附註:	Adviser: Timothy J. Hall.
Contained By:	Dissertation Abstracts International69-05B.
標題:	Engineering, Biomedical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3314239
ISBN:	9780549634119

Evaluation of a pressure sensing array for use with ultrasound strain imaging.
Kiessel, Lee Mathew.

Evaluation of a pressure sensing array for use with ultrasound strain imaging. - 189 p.

Adviser: Timothy J. Hall.

Thesis (Ph.D.)--The University of Wisconsin - Madison, 2008.

Mechanical in vitro tests and in vivo elasticity imaging have shown differences between breast tissue types in their nonlinear stress/strain behavior. This information could be utilized to differentiate between benign and malignant lesions potentially reducing the benign biopsy rate. Stress and strain measurements are required for absolute measures of this non-linear behavior in vivo. A capacitive pressure sensing array was investigated for measurement of surface stress in conjunction with ultrasound strain imaging.

ISBN: 9780549634119Subjects--Topical Terms:

1017684
Engineering, Biomedical.

Evaluation of a pressure sensing array for use with ultrasound strain imaging.
LDR:03153nmm 2200301 a 45 001 866716
005 20100802
008 100802s2008 ||||||||||||||||| ||eng d
020 $a 9780549634119
035 $a (UMI)AAI3314239
035 $a AAI3314239
040 $a UMI $c UMI
100 1 $a Kiessel, Lee Mathew. $3 1035379
245 1 0 $a Evaluation of a pressure sensing array for use with ultrasound strain imaging.
300 $a 189 p.
500 $a Adviser: Timothy J. Hall.
500 $a Source: Dissertation Abstracts International, Volume: 69-05, Section: B, page: 3129.
502 $a Thesis (Ph.D.)--The University of Wisconsin - Madison, 2008.
520 $a Mechanical in vitro tests and in vivo elasticity imaging have shown differences between breast tissue types in their nonlinear stress/strain behavior. This information could be utilized to differentiate between benign and malignant lesions potentially reducing the benign biopsy rate. Stress and strain measurements are required for absolute measures of this non-linear behavior in vivo. A capacitive pressure sensing array was investigated for measurement of surface stress in conjunction with ultrasound strain imaging.
520 $a A variety of experiments were performed with a prototype pressure sensor array to gauge its stability, minimum detectable pressure and noise level in reference to its application in ultrasound elastography. A method of calibration was also developed. Measurements of the surface pressure during deformations of phantoms were taken and compared to results from simulations. In addition, data was collected from patients undergoing ultrasound elasticity imaging at the University of Wisconsin Breast Center.
520 $a The experiments demonstrated that the pressure sensor array was stable in an ultrasound imaging environment, though it exhibited a significant warm-up period. A measurement dependence on the stress history was also characterized. A reliable calibration technique was developed, which demonstrates reproducibility to within 5% for most elements. Experiments also show a wide disparity in the minimum detectable pressure among elements. The most sensitive elements are capable of detecting pressure as low as about 100 Pa. The most sensitive elements make the array capable of detecting initial contact and measuring the contact force during a deformation of the breast---a critical task for quantifying stress/strain nonlinearities. The clinical trial confirmed this prediction. However, surface pressure distribution measurements on phantoms have shown only modest agreement with FEA simulations. Geometric uncertainties on the surface of the sensor as well as the variability of the absolute calibration make the array ill suited to measure accurate maps of the surface pressure distribution which might limit its utility for stress distribution measurements and elastic modulus reconstructions.
590 $a School code: 0262.
650 4 $a Engineering, Biomedical. $3 1017684
650 4 $a Health Sciences, Radiology. $3 1019076
690 $a 0541
690 $a 0574
710 2 $a The University of Wisconsin - Madison. $3 626640
773 0 $t Dissertation Abstracts International $g 69-05B.
790 $a 0262
790 1 0 $a Hall, Timothy J., $e advisor
791 $a Ph.D.
792 $a 2008
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3314239