語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Streamline-based three-phase history...
~
Texas A&M University.
FindBook
Google Book
Amazon
博客來
Streamline-based three-phase history matching.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Streamline-based three-phase history matching./
作者:
Oyerinde, Adedayo Stephen.
面頁冊數:
139 p.
附註:
Adviser: Akhil Datta-Gupta.
Contained By:
Dissertation Abstracts International69-07B.
標題:
Engineering, Environmental. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3321761
ISBN:
9780549724353
Streamline-based three-phase history matching.
Oyerinde, Adedayo Stephen.
Streamline-based three-phase history matching.
- 139 p.
Adviser: Akhil Datta-Gupta.
Thesis (Ph.D.)--Texas A&M University, 2008.
Geologic models derived from static data alone typically fail to reproduce the production history of a reservoir, thus the importance of reconciling simulation models to the dynamic response of the reservoir. This necessity has been the motivation behind the active research work in history matching. Traditionally, history matching is performed manually by applying local and regional changes to reservoir properties. While this is still in general practice, the subjective overtone of this approach, the time and manpower requirements, and the potential loss of geologic consistency have led to the development of a variety of alternative workflows for assisted and automatic history matching. Automatic history matching requires the solution of an inverse problem by minimizing an appropriately defined misfit function.
ISBN: 9780549724353Subjects--Topical Terms:
783782
Engineering, Environmental.
Streamline-based three-phase history matching.
LDR
:03605nmm 2200301 a 45
001
863228
005
20100721
008
100721s2008 ||||||||||||||||| ||eng d
020
$a
9780549724353
035
$a
(UMI)AAI3321761
035
$a
AAI3321761
040
$a
UMI
$c
UMI
100
1
$a
Oyerinde, Adedayo Stephen.
$3
1031130
245
1 0
$a
Streamline-based three-phase history matching.
300
$a
139 p.
500
$a
Adviser: Akhil Datta-Gupta.
500
$a
Source: Dissertation Abstracts International, Volume: 69-07, Section: B, page: 4395.
502
$a
Thesis (Ph.D.)--Texas A&M University, 2008.
520
$a
Geologic models derived from static data alone typically fail to reproduce the production history of a reservoir, thus the importance of reconciling simulation models to the dynamic response of the reservoir. This necessity has been the motivation behind the active research work in history matching. Traditionally, history matching is performed manually by applying local and regional changes to reservoir properties. While this is still in general practice, the subjective overtone of this approach, the time and manpower requirements, and the potential loss of geologic consistency have led to the development of a variety of alternative workflows for assisted and automatic history matching. Automatic history matching requires the solution of an inverse problem by minimizing an appropriately defined misfit function.
520
$a
Recent advances in geostatistics have led to the building of high-resolution geologic models consisting of millions of cells. Most of these are scaled up to the sub-million size for reservoir simulation purposes. History matching even the scaled up models is computationally prohibitive. The associated cost in terms of time and manpower has led to increased interest in efficient history matching techniques and in particular, to sensitivity-based algorithms because of their rapid convergence. Furthermore, of the sensitivity-based methods, streamline-based production data integration has proven to be extremely efficient computationally.
520
$a
In this work, we extend the history matching capability of the streamline-based technique to three-phase production while addressing in general, pertinent issues associated with history matching. We deviate from the typical approach of formulating the inverse problem in terms of derived quantities such as GOR and Watercut, or measured phase rates, but concentrate on the fundamental variables that characterize such quantities. The presented formulation is in terms of well node saturations and pressures. Production data is transformed to composite saturation quantities, the time variation of which is matched in the calibration exercise. The dependence of the transformation on pressure highlights its importance and thus a need for pressure match. To address this need, we follow a low frequency asymptotic formulation for the pressure equation. We propose a simultaneous inversion of the saturation and pressure components to account for the interdependence and thus, high non-linearity of three phase inversion. We also account for global parameters through experimental design methodology and response surface modeling. The validity of the proposed history matching technique is demonstrated through application to both synthetic and field cases.
590
$a
School code: 0803.
650
4
$a
Engineering, Environmental.
$3
783782
650
4
$a
Engineering, Petroleum.
$3
1018448
690
$a
0765
690
$a
0775
710
2
$a
Texas A&M University.
$3
718977
773
0
$t
Dissertation Abstracts International
$g
69-07B.
790
$a
0803
790
1 0
$a
Datta-Gupta, Akhil,
$e
advisor
791
$a
Ph.D.
792
$a
2008
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3321761
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9076606
電子資源
11.線上閱覽_V
電子書
EB W9076606
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入