東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Processing, characterization, and mo...

Northwestern University., Theoretical and Applied Mechanics.

FindBook

Google Book

Amazon

博客來

Processing, characterization, and modeling of nanoparticle reinforced fiber composites.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Processing, characterization, and modeling of nanoparticle reinforced fiber composites./
作者:	Chen, Jui-Ying.
面頁冊數:	150 p.
附註:	Adviser: Isaac M. Daniel.
Contained By:	Dissertation Abstracts International68-11B.
標題:	Applied Mechanics. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3284200
ISBN:	9780549294771

Processing, characterization, and modeling of nanoparticle reinforced fiber composites.
Chen, Jui-Ying.

Processing, characterization, and modeling of nanoparticle reinforced fiber composites. - 150 p.

Adviser: Isaac M. Daniel.

Thesis (Ph.D.)--Northwestern University, 2007.

Continuous fiber/epoxy composites have been widely used for structural applications due to their excellent mechanical properties, but the benefits of using these composites is limited by their lower than desired matrix-dominated properties. In this study, epoxy matrix in carbon fiber/epoxy composites was modified with graphite nanoplatelets to improve their mechanical properties. Two processing methods, prepreg-autoclave process and vacuum assisted wet lay-up, were adopted to prepare the nanoparticle-reinforced fiber composites. It was found that both the in-plane shear modulus and the compressive strength obtained by the prepreg-autoclave method were improved more prominently than those obtained by the vacuum assisted wet lay-up process. This can be attributed to the higher mechanical enhancement in the matrix phase by the prepreg-autoclave process than by the vacuum assisted wet lay-up process. In the prepreg-autoclave process, the compressive strength of the composites was increased by 44% with 3 wt% nanoparticle loading, and the in-plane shear modulus was improved by 15% and 24% with 3 wt% and 5 wt% of nanoparticle loadings, respectively. Prepregs normalized to a consistent partial cure (B-stage) with or without graphite nanoparticles were obtained as a byproduct, thus making the proposed prepreg-autoclave method valuable for fabricating prepregs of nanoparticle reinforced composite materials. The effect of the crimping of the transverse glass fiber yarns holding the carbon fibers, was analyzed. The crimps are viewed as local fiber misalignment and taken into account in simulation models for prediction of compressive strength. Numerical simulation models, based on the fiber geometry observed in the composites, showed good agreement with the experimental results. It is shown that the compressive strength of the composite can be enhanced by increasing modulus of the matrix. Reducing the fiber misalignment in the composite will further increase the compressive strength.

ISBN: 9780549294771Subjects--Topical Terms:

1018410
Applied Mechanics.

Processing, characterization, and modeling of nanoparticle reinforced fiber composites.
LDR:03019nam 2200313 a 45 001 858592
005 20100713
008 100713s2007 ||||||||||||||||| ||eng d
020 $a 9780549294771
035 $a (UMI)AAI3284200
035 $a AAI3284200
040 $a UMI $c UMI
100 1 $a Chen, Jui-Ying. $3 1025698
245 1 0 $a Processing, characterization, and modeling of nanoparticle reinforced fiber composites.
300 $a 150 p.
500 $a Adviser: Isaac M. Daniel.
500 $a Source: Dissertation Abstracts International, Volume: 68-11, Section: B, page: 7417.
502 $a Thesis (Ph.D.)--Northwestern University, 2007.
520 $a Continuous fiber/epoxy composites have been widely used for structural applications due to their excellent mechanical properties, but the benefits of using these composites is limited by their lower than desired matrix-dominated properties. In this study, epoxy matrix in carbon fiber/epoxy composites was modified with graphite nanoplatelets to improve their mechanical properties. Two processing methods, prepreg-autoclave process and vacuum assisted wet lay-up, were adopted to prepare the nanoparticle-reinforced fiber composites. It was found that both the in-plane shear modulus and the compressive strength obtained by the prepreg-autoclave method were improved more prominently than those obtained by the vacuum assisted wet lay-up process. This can be attributed to the higher mechanical enhancement in the matrix phase by the prepreg-autoclave process than by the vacuum assisted wet lay-up process. In the prepreg-autoclave process, the compressive strength of the composites was increased by 44% with 3 wt% nanoparticle loading, and the in-plane shear modulus was improved by 15% and 24% with 3 wt% and 5 wt% of nanoparticle loadings, respectively. Prepregs normalized to a consistent partial cure (B-stage) with or without graphite nanoparticles were obtained as a byproduct, thus making the proposed prepreg-autoclave method valuable for fabricating prepregs of nanoparticle reinforced composite materials. The effect of the crimping of the transverse glass fiber yarns holding the carbon fibers, was analyzed. The crimps are viewed as local fiber misalignment and taken into account in simulation models for prediction of compressive strength. Numerical simulation models, based on the fiber geometry observed in the composites, showed good agreement with the experimental results. It is shown that the compressive strength of the composite can be enhanced by increasing modulus of the matrix. Reducing the fiber misalignment in the composite will further increase the compressive strength.
590 $a School code: 0163.
650 4 $a Applied Mechanics. $3 1018410
650 4 $a Engineering, Civil. $3 783781
650 4 $a Engineering, Mechanical. $3 783786
690 $a 0346
690 $a 0543
690 $a 0548
710 2 $a Northwestern University. $b Theoretical and Applied Mechanics. $3 1025697
773 0 $t Dissertation Abstracts International $g 68-11B.
790 $a 0163
790 1 0 $a Brinson, L. Catherine $e committee member
790 1 0 $a Cao, Jian $e committee member
790 1 0 $a Daniel, Isaac M., $e advisor
791 $a Ph.D.
792 $a 2007
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3284200