東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Automated process planning for addit...

Prakash, Vishnuu Jothi.

FindBook

Google Book

Amazon

博客來

Automated process planning for additive manufacturing with directed energy deposition

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Automated process planning for additive manufacturing with directed energy deposition/ by Vishnuu Jothi Prakash.
作者:	Prakash, Vishnuu Jothi.
出版者:	Cham :Springer Nature Switzerland : : 2025.,
面頁冊數:	xxvi, 148 p. :ill. (some col.), digital ;24 cm.
內容註:	Introduction -- Literature Review -- Research Needs and Goals -- Research Methodology -- Slicing and Toolpath Generation Approaches -- Influence of Process Parameters and Toolpath Strategy on Build Quality -- Conclusion and Outlook.
Contained By:	Springer Nature eBook
標題:	Additive manufacturing. -
電子資源:	https://doi.org/10.1007/978-3-031-87666-0
ISBN:	9783031876660

Automated process planning for additive manufacturing with directed energy deposition
Prakash, Vishnuu Jothi.

Automated process planning for additive manufacturing with directed energy deposition[electronic resource] /by Vishnuu Jothi Prakash. - Cham :Springer Nature Switzerland :2025. - xxvi, 148 p. :ill. (some col.), digital ;24 cm. - Light Engineering für die Praxis,2522-8455. - Light Engineering für die Praxis..

Introduction -- Literature Review -- Research Needs and Goals -- Research Methodology -- Slicing and Toolpath Generation Approaches -- Influence of Process Parameters and Toolpath Strategy on Build Quality -- Conclusion and Outlook.

This book provides an in-depth exploration of process planning steps required for Directed Energy Deposition (DED) processes and their automation during the data preparation stage. DED is a resource-efficient, tool-less manufacturing method with high deposition rates and larger build volumes. Their flexibility, enabled by 6-axis industrial robots, allows fabrication of complex geometries, but poses challenges in data preparation and build strategy definition due to software limitations and lack of standards. This thesis thereby deals with the development of a STEP file format-based slicing framework with toolpath generation algorithms specific to build geometries clustered under six categories. Thin-wall components cluster, an important part category in the aerospace sector, is being further examined because of its industrial relevance. The content Comprehensive overview of the process chain of Directed Energy Deposition Algorithms for slicing and toolpath generation of CAD data based on STEP-file format Methodology for systematic identification of process parameters and build strategy The author Vishnuu Jothi Prakash's journey began with a Bachelor of Engineering in Mechanical Engineering from PSG College of Technology in Coimbatore, India, graduating in 2013. Having gained industrial exposure at MAHLE Filter Systems in Gurgaon, India, he moved to Germany for a Master of Science in International Production Management at Hamburg University of Technology (TUHH), completing it in 2017. He then worked as a Research Associate at Laser Zentrum Nord GmbH in Hamburg on laser material processing projects. Since January 2018, he has been with Fraunhofer IAPT, focusing on advancing additive manufacturing through research and collaboration with industry partners.

ISBN: 9783031876660

Standard No.: 10.1007/978-3-031-87666-0doiSubjects--Topical Terms:

3451278
Additive manufacturing.

LC Class. No.: TS183.25

Dewey Class. No.: 621.988

Automated process planning for additive manufacturing with directed energy deposition
LDR:03088nmm a2200337 a 4500 001 2410148
003 DE-He213
005 20250507002128.0
006 m d
007 cr nn 008maaau
008 260204s2025 sz s 0 eng d
020 $a 9783031876660 $q (electronic bk.)
020 $a 9783031876653 $q (paper)
024 7 $a 10.1007/978-3-031-87666-0 $2 doi
035 $a 978-3-031-87666-0
040 $a GP $c GP
041 0 $a eng
050 4 $a TS183.25
072 7 $a TBM $2 bicssc
072 7 $a TEC004000 $2 bisacsh
072 7 $a TBM $2 thema
082 0 4 $a 621.988 $2 23
090 $a TS183.25 $b .P898 2025
100 1 $a Prakash, Vishnuu Jothi. $3 3783840
245 1 0 $a Automated process planning for additive manufacturing with directed energy deposition $h [electronic resource] / $c by Vishnuu Jothi Prakash.
260 $a Cham : $b Springer Nature Switzerland : $b Imprint: Springer, $c 2025.
300 $a xxvi, 148 p. : $b ill. (some col.), digital ; $c 24 cm.
490 1 $a Light Engineering für die Praxis, $x 2522-8455
505 0 $a Introduction -- Literature Review -- Research Needs and Goals -- Research Methodology -- Slicing and Toolpath Generation Approaches -- Influence of Process Parameters and Toolpath Strategy on Build Quality -- Conclusion and Outlook.
520 $a This book provides an in-depth exploration of process planning steps required for Directed Energy Deposition (DED) processes and their automation during the data preparation stage. DED is a resource-efficient, tool-less manufacturing method with high deposition rates and larger build volumes. Their flexibility, enabled by 6-axis industrial robots, allows fabrication of complex geometries, but poses challenges in data preparation and build strategy definition due to software limitations and lack of standards. This thesis thereby deals with the development of a STEP file format-based slicing framework with toolpath generation algorithms specific to build geometries clustered under six categories. Thin-wall components cluster, an important part category in the aerospace sector, is being further examined because of its industrial relevance. The content Comprehensive overview of the process chain of Directed Energy Deposition Algorithms for slicing and toolpath generation of CAD data based on STEP-file format Methodology for systematic identification of process parameters and build strategy The author Vishnuu Jothi Prakash's journey began with a Bachelor of Engineering in Mechanical Engineering from PSG College of Technology in Coimbatore, India, graduating in 2013. Having gained industrial exposure at MAHLE Filter Systems in Gurgaon, India, he moved to Germany for a Master of Science in International Production Management at Hamburg University of Technology (TUHH), completing it in 2017. He then worked as a Research Associate at Laser Zentrum Nord GmbH in Hamburg on laser material processing projects. Since January 2018, he has been with Fraunhofer IAPT, focusing on advancing additive manufacturing through research and collaboration with industry partners.
650 0 $a Additive manufacturing. $3 3451278
650 1 4 $a Industrial Automation. $3 3591948
650 2 4 $a Industrial and Production Engineering. $3 891024
650 2 4 $a Engineering Design. $3 891033
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer Nature eBook
830 0 $a Light Engineering für die Praxis. $3 3783841
856 4 0 $u https://doi.org/10.1007/978-3-031-87666-0
950 $a Engineering (SpringerNature-11647)