東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Development of a self-sufficient, wi...

Bornemann, Sarah.

FindBook

Google Book

Amazon

博客來

Development of a self-sufficient, wireless sensor node using the outer FML layer as an antenna

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Development of a self-sufficient, wireless sensor node using the outer FML layer as an antenna/ by Sarah Bornemann.
作者:	Bornemann, Sarah.
出版者:	Cham :Springer Nature Switzerland : : 2025.,
面頁冊數:	xvi, 134 p. :ill. (some col.), digital ;24 cm.
內容註:	Chapter 1. Introduction and Overview -- Chapter 2. Fiber Metal Laminates -- Chapter 3. Wireless Interface -- Chapter 4. Embedded Electronics -- Chapter 5. Structural Health Monitoring -- Chapter 6. Conclusion.
Contained By:	Springer Nature eBook
標題:	Wireless sensor nodes. -
電子資源:	https://doi.org/10.1007/978-3-031-70648-6
ISBN:	9783031706486

Development of a self-sufficient, wireless sensor node using the outer FML layer as an antenna
Bornemann, Sarah.

Development of a self-sufficient, wireless sensor node using the outer FML layer as an antenna[electronic resource] /by Sarah Bornemann. - Cham :Springer Nature Switzerland :2025. - xvi, 134 p. :ill. (some col.), digital ;24 cm. - Mechanics and adaptronics,2731-622X. - Mechanics and adaptronics..

Chapter 1. Introduction and Overview -- Chapter 2. Fiber Metal Laminates -- Chapter 3. Wireless Interface -- Chapter 4. Embedded Electronics -- Chapter 5. Structural Health Monitoring -- Chapter 6. Conclusion.

This book presents an investigation on integrating wireless sensor nodes including their antennas into fiber metal laminates (FMLs) for the purpose of enabling wireless, material-integrated structural health monitoring. Within the scope of this work, a digital sensor node is presented, which can be fully integrated into a conductive host material. A stainless steel antenna supplies the system with sufficient power to provide the functions required for its intended use. This system enables the wireless readout of sensor data for the detection of damage in FMLs. The application focuses on aerospace components, for the detection of damage in the inner material layers, which are not or only hardly detectable by optical inspection methods. Guided ultrasonic waves in the form of Lamb waves are used for this. The flexible electronics are inserted into the layers of the target material, while the associated antenna is cut into the outer metal layer. This turns the outer metal layer, which would prevent wireless communication from inside the laminate, into an advantage, as the need for an additional, external antenna is eliminated. Two fundamentally different principles can be used as the sensor element. Piezoelectric sensors were already used extensively in structural health monitoring using ultrasound and recently developed piezoresistive sensors, which are designed to be very small, making them highly suitable for material integration. Both types of sensors can be read out with the presented system so that the most appropriate approach can be chosen depending on the application. The suitability of the wireless sensor system for its intended purpose is verified by material-integrated measurements. At the end of this work, it is shown that the raw data of the measurements reproducibly provide a sufficient resolution of the sensor signal to manually identify changes caused by applied reversible, artificial pseudo-defects from reference measurements without any damage. The intended audience of this book are people from the field which are familiar with the basic concepts of electrical engineering or similar regions, embedded system enthusiasts and all readers who like to follow the process of a complete wireless electronic system design from requirements analysis to final material-integrated measurement demonstrations.

ISBN: 9783031706486

Standard No.: 10.1007/978-3-031-70648-6doiSubjects--Topical Terms:

3512381
Wireless sensor nodes.

LC Class. No.: TK7872.D48

Dewey Class. No.: 006.25

Development of a self-sufficient, wireless sensor node using the outer FML layer as an antenna
LDR:03630nmm a2200337 a 4500 001 2409023
003 DE-He213
005 20250124122310.0
006 m d
007 cr nn 008maaau
008 260204s2025 sz s 0 eng d
020 $a 9783031706486 $q (electronic bk.)
020 $a 9783031706479 $q (paper)
024 7 $a 10.1007/978-3-031-70648-6 $2 doi
035 $a 978-3-031-70648-6
040 $a GP $c GP
041 0 $a eng
050 4 $a TK7872.D48
072 7 $a TJFC $2 bicssc
072 7 $a TEC008010 $2 bisacsh
072 7 $a TJFC $2 thema
082 0 4 $a 006.25 $2 23
090 $a TK7872.D48 $b B736 2025
100 1 $a Bornemann, Sarah. $3 3781968
245 1 0 $a Development of a self-sufficient, wireless sensor node using the outer FML layer as an antenna $h [electronic resource] / $c by Sarah Bornemann.
260 $a Cham : $b Springer Nature Switzerland : $b Imprint: Springer, $c 2025.
300 $a xvi, 134 p. : $b ill. (some col.), digital ; $c 24 cm.
490 1 $a Mechanics and adaptronics, $x 2731-622X
505 0 $a Chapter 1. Introduction and Overview -- Chapter 2. Fiber Metal Laminates -- Chapter 3. Wireless Interface -- Chapter 4. Embedded Electronics -- Chapter 5. Structural Health Monitoring -- Chapter 6. Conclusion.
520 $a This book presents an investigation on integrating wireless sensor nodes including their antennas into fiber metal laminates (FMLs) for the purpose of enabling wireless, material-integrated structural health monitoring. Within the scope of this work, a digital sensor node is presented, which can be fully integrated into a conductive host material. A stainless steel antenna supplies the system with sufficient power to provide the functions required for its intended use. This system enables the wireless readout of sensor data for the detection of damage in FMLs. The application focuses on aerospace components, for the detection of damage in the inner material layers, which are not or only hardly detectable by optical inspection methods. Guided ultrasonic waves in the form of Lamb waves are used for this. The flexible electronics are inserted into the layers of the target material, while the associated antenna is cut into the outer metal layer. This turns the outer metal layer, which would prevent wireless communication from inside the laminate, into an advantage, as the need for an additional, external antenna is eliminated. Two fundamentally different principles can be used as the sensor element. Piezoelectric sensors were already used extensively in structural health monitoring using ultrasound and recently developed piezoresistive sensors, which are designed to be very small, making them highly suitable for material integration. Both types of sensors can be read out with the presented system so that the most appropriate approach can be chosen depending on the application. The suitability of the wireless sensor system for its intended purpose is verified by material-integrated measurements. At the end of this work, it is shown that the raw data of the measurements reproducibly provide a sufficient resolution of the sensor signal to manually identify changes caused by applied reversible, artificial pseudo-defects from reference measurements without any damage. The intended audience of this book are people from the field which are familiar with the basic concepts of electrical engineering or similar regions, embedded system enthusiasts and all readers who like to follow the process of a complete wireless electronic system design from requirements analysis to final material-integrated measurement demonstrations.
650 0 $a Wireless sensor nodes. $3 3512381
650 1 4 $a Electronic Circuits and Systems. $3 3538814
650 2 4 $a Materials Engineering. $3 2071625
650 2 4 $a Microwaves, RF Engineering and Optical Communications. $3 3538694
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer Nature eBook
830 0 $a Mechanics and adaptronics. $3 3625667
856 4 0 $u https://doi.org/10.1007/978-3-031-70648-6
950 $a Engineering (SpringerNature-11647)