東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Development of grinding models for b...

Sharp, Keith Wayne.

Linked to FindBook

Google Book

Amazon

博客來

Development of grinding models for brittle materials.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Development of grinding models for brittle materials./
Author:	Sharp, Keith Wayne.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 1998,
Description:	140 p.
Notes:	Source: Dissertations Abstracts International, Volume: 60-08, Section: B.
Contained By:	Dissertations Abstracts International60-08B.
Subject:	Materials science. -
Online resource:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9904939
ISBN:	9780599022041

Development of grinding models for brittle materials.
Sharp, Keith Wayne.

Development of grinding models for brittle materials. - Ann Arbor : ProQuest Dissertations & Theses, 1998 - 140 p.

Source: Dissertations Abstracts International, Volume: 60-08, Section: B.

Thesis (Ph.D.)--North Carolina State University, 1998.

Accurate prediction of the onset of fracture during the grinding of brittle materials would enable parts to be made with little or no subsurface damage. The fracture mechanics of an indentation test provides a model for the behavior of brittle materials. During an indentation test, a critical depth exists where the energy of new surface formation becomes less than the energy of plastic deformation and the material begins to fracture. In grinding the critical infeed per revolution is an order of magnitude less than the critical indentation depth. For grinding, the indenters are the grit randomly dispersed in the grinding wheel. Determination of the individual depth of cut of the grit requires relating the distribution of the grit to the surface of the workpiece and the desired infeed. This research develops an analytic model which solves for the depth of cut using the statistics of a random distribution of grit cutting a surface. Two distinct cutting regimes can be identified. At extremely low infeeds the grain depth of cut is equal to the infeed, but as the infeed is increased the depth of cut becomes less than the infeed. Using this model as a baseline, the relation of the specific grinding energy $\\mu\\sb{\\rm g}$ to the grit depth of cut was developed for ductile regime grinding with spherical grit. In the ductile regime, at nanometer level infeeds per revolution $\\mu\\sb{\\rm g}$ was predicted to have a negative power law relation to the depth of cut. Plunge grinding experiments were conducted on BK7, CVD SiC, and silicon, which measured the cutting and normal forces in-situ and the workpiece surfaces after the tests. A method of determining $\\mu\\sb{\\rm g}$ for each revolution of the wheel was developed. For each of the plunge grinding tests, $\\mu\\sb{\\rm g}$ had a minimum value corresponding to the as-dressed wear state of the grit. The minimum $\\mu\\sb{\\rm g}$ values confirmed the negative power law relation of $\\mu\\sb{\\rm g}$ to the depth of cut in the ductile regime and found that $\\mu\\sb{\\rm g}$ is no longer a function of the depth of cut in the brittle regime. The transitions infeed rates identified by minimum $\\mu\\sb{\\rm g}$ were verified by optical and surface roughness measurements of the workpiece surfaces.

ISBN: 9780599022041Subjects--Topical Terms:

543314
Materials science.
Subjects--Index Terms:

Brittle materials

Development of grinding models for brittle materials.
LDR:03391nmm a2200373 4500 001 2400232
005 20240924101525.5
006 m o d
007 cr#unu||||||||
008 251215s1998 ||||||||||||||||| ||eng d
020 $a 9780599022041
035 $a (MiAaPQ)AAI9904939
035 $a AAI9904939
040 $a MiAaPQ $c MiAaPQ
100 1 $a Sharp, Keith Wayne. $3 3770201
245 1 0 $a Development of grinding models for brittle materials.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 1998
300 $a 140 p.
500 $a Source: Dissertations Abstracts International, Volume: 60-08, Section: B.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Scattergood, Ronald O.
502 $a Thesis (Ph.D.)--North Carolina State University, 1998.
520 $a Accurate prediction of the onset of fracture during the grinding of brittle materials would enable parts to be made with little or no subsurface damage. The fracture mechanics of an indentation test provides a model for the behavior of brittle materials. During an indentation test, a critical depth exists where the energy of new surface formation becomes less than the energy of plastic deformation and the material begins to fracture. In grinding the critical infeed per revolution is an order of magnitude less than the critical indentation depth. For grinding, the indenters are the grit randomly dispersed in the grinding wheel. Determination of the individual depth of cut of the grit requires relating the distribution of the grit to the surface of the workpiece and the desired infeed. This research develops an analytic model which solves for the depth of cut using the statistics of a random distribution of grit cutting a surface. Two distinct cutting regimes can be identified. At extremely low infeeds the grain depth of cut is equal to the infeed, but as the infeed is increased the depth of cut becomes less than the infeed. Using this model as a baseline, the relation of the specific grinding energy $\\mu\\sb{\\rm g}$ to the grit depth of cut was developed for ductile regime grinding with spherical grit. In the ductile regime, at nanometer level infeeds per revolution $\\mu\\sb{\\rm g}$ was predicted to have a negative power law relation to the depth of cut. Plunge grinding experiments were conducted on BK7, CVD SiC, and silicon, which measured the cutting and normal forces in-situ and the workpiece surfaces after the tests. A method of determining $\\mu\\sb{\\rm g}$ for each revolution of the wheel was developed. For each of the plunge grinding tests, $\\mu\\sb{\\rm g}$ had a minimum value corresponding to the as-dressed wear state of the grit. The minimum $\\mu\\sb{\\rm g}$ values confirmed the negative power law relation of $\\mu\\sb{\\rm g}$ to the depth of cut in the ductile regime and found that $\\mu\\sb{\\rm g}$ is no longer a function of the depth of cut in the brittle regime. The transitions infeed rates identified by minimum $\\mu\\sb{\\rm g}$ were verified by optical and surface roughness measurements of the workpiece surfaces.
590 $a School code: 0155.
650 4 $a Materials science. $3 543314
650 4 $a Mechanical engineering. $3 649730
650 4 $a Mechanics. $3 525881
653 $a Brittle materials
653 $a Fracture
653 $a Grinding
690 $a 0794
690 $a 0548
690 $a 0346
710 2 $a North Carolina State University. $3 1018772
773 0 $t Dissertations Abstracts International $g 60-08B.
790 $a 0155
791 $a Ph.D.
792 $a 1998
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=9904939