東華大學圖書館 |

Proceedings of the International Conference on Metallurgical Engineering and Centenary Celebration = METCENT-2023, 26-28 October, Varanasi, India /

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Proceedings of the International Conference on Metallurgical Engineering and Centenary Celebration/ edited by Sudipta Patra ... [et al.].
其他題名:	METCENT-2023, 26-28 October, Varanasi, India /
其他題名:	METCENT 2023
其他作者:	Patra, Sudipta.
團體作者:	International Conference on Metallurgical Engineering and Centenary Celebration
出版者:	Singapore :Springer Nature Singapore : : 2024.,
面頁冊數:	xii, 402 p. :ill. (some col.), digital ;24 cm.
內容註:	Development of a Low Silica Calcium Aluminate Based Mould Flux for Casting High Al/Mn Steels -- Some Aspects of the Chemistry of Slags containing Cr and V -- Solid state reduction of Hematite ore using hydrogen at moderate temperatures -- Influence of silicon source on the steel cleanness -- Utilization of Biomass Pellets in the Iron Ore Sintering process -- Carbothermic reduction and kinetics of a lean grade multimetallic magnetite ore -- Reduction kinetics of composite steel slag-coke pellets -- Investigating the Suitability of Local Riverbed Sand as a Mold Material for Foundry Industry: A Comparative Study -- Effect of external magnetic field on grain boundary migration in non-magnetic systems: A Phase-field Study -- Deformation in metals: insights from ab-initio Calculations -- Heat Transfer Modelling for a Thermomagnetic Energy Generator Design -- Theoretical Comparison and Machine Learning Based Predictions on Li-Ion Battery's Health Using NASA-Battery Dataset. -- Prediction of Mechanical Properties of Cr-Mn-N Austenitic Stainless Steel using Machine Learning approach -- On the deformation mechanism and dislocation density evolution in a polycrystalline nano copper at 10 K-700 K / 108 s-1-109 s-1 employing molecular dynamics simulations -- Thermodynamic assessment of Tin based Molten Binary Indium-Tin Solder Alloys -- Nanosized hybrid polymer modifiers (HPM) for improved mechanical and thermal behavior of carbon fiber reinforced composites -- Efficient degradation of pendimethalin via photo-catalytic ozonation over Ni/Mg @ TiO2 nanocomposites -- Effect of A-site Pr-doping on Dielectric and Thermoelectric Properties of Lanthanum Based La2FeNbO6 Double Perovskite Oxide Materials -- Investigation of Solidification Behavior and Processing Defects in the Continuous Cast Al-based Composite Sheet -- Influence of Sodium on the Microstructure of Laser Rapid Manufactured NiCrSiBC Hardface Alloy Coatings -- Study of Geometry Modulated Magnetoelectric Composite Structure -- Development of Third Generation Advanced High Strength Steel -- Cracking problem during room temperature cold rolling of three high Al low C ferritic low density-steels -- Effect of Cu on the microstructure and properties of hot rolled low carbon steels -- Role of Cerium on high-temperature oxidation behaviour of low-carbon steel -- High temperature oxidation of T91 alloy -- Development of High Quality SWRH82A Grade Tyre Cord Steel Wire Rods -- Rotary Friction Welding of Cast Nickel Base Superalloy with Martensitic Stainless Steel for Aero Engine Application -- Brittle Fracture Failure Analysis under Mixed-Mode Condition Using Asymmetric Edge Cracked Semicircular (AECS) Configuration -- Analyzing the Effect of Dynamic Impact in 6061 Al Alloy using MATLAB as a post processing tool -- Ratcheting fatigue behaviour of advanced structural materials -- Study of microstructure and mechanical properties of similar and dissimilar FSW of Al 7075 and Mg AZ31 alloys without and with Zn interlayer -- Mechanical and Corrosion Study of Dissimilar Friction Stir Welding of AZ31Mg alloy and Cu-8Zn alloy -- Enhancing Technologies to improve Metallurgical Processes -- Smelting Reduction Technology - Current status and future outlook -- Green Steel Technology: A viable approach for sustainable world -- A review on use of biomass as an alternative to coal for sustainable ironmaking -- Basics of Iron Ore Sintering.
Contained By:	Springer Nature eBook
標題:	Metallurgy - Congresses. -
電子資源:	https://doi.org/10.1007/978-981-99-6863-3
ISBN:	9789819968633

Proceedings of the International Conference on Metallurgical Engineering and Centenary Celebration = METCENT-2023, 26-28 October, Varanasi, India /
Proceedings of the International Conference on Metallurgical Engineering and Centenary CelebrationMETCENT-2023, 26-28 October, Varanasi, India /[electronic resource] :METCENT 2023edited by Sudipta Patra ... [et al.]. - Singapore :Springer Nature Singapore :2024. - xii, 402 p. :ill. (some col.), digital ;24 cm.

Development of a Low Silica Calcium Aluminate Based Mould Flux for Casting High Al/Mn Steels -- Some Aspects of the Chemistry of Slags containing Cr and V -- Solid state reduction of Hematite ore using hydrogen at moderate temperatures -- Influence of silicon source on the steel cleanness -- Utilization of Biomass Pellets in the Iron Ore Sintering process -- Carbothermic reduction and kinetics of a lean grade multimetallic magnetite ore -- Reduction kinetics of composite steel slag-coke pellets -- Investigating the Suitability of Local Riverbed Sand as a Mold Material for Foundry Industry: A Comparative Study -- Effect of external magnetic field on grain boundary migration in non-magnetic systems: A Phase-field Study -- Deformation in metals: insights from ab-initio Calculations -- Heat Transfer Modelling for a Thermomagnetic Energy Generator Design -- Theoretical Comparison and Machine Learning Based Predictions on Li-Ion Battery's Health Using NASA-Battery Dataset. -- Prediction of Mechanical Properties of Cr-Mn-N Austenitic Stainless Steel using Machine Learning approach -- On the deformation mechanism and dislocation density evolution in a polycrystalline nano copper at 10 K-700 K / 108 s-1-109 s-1 employing molecular dynamics simulations -- Thermodynamic assessment of Tin based Molten Binary Indium-Tin Solder Alloys -- Nanosized hybrid polymer modifiers (HPM) for improved mechanical and thermal behavior of carbon fiber reinforced composites -- Efficient degradation of pendimethalin via photo-catalytic ozonation over Ni/Mg @ TiO2 nanocomposites -- Effect of A-site Pr-doping on Dielectric and Thermoelectric Properties of Lanthanum Based La2FeNbO6 Double Perovskite Oxide Materials -- Investigation of Solidification Behavior and Processing Defects in the Continuous Cast Al-based Composite Sheet -- Influence of Sodium on the Microstructure of Laser Rapid Manufactured NiCrSiBC Hardface Alloy Coatings -- Study of Geometry Modulated Magnetoelectric Composite Structure -- Development of Third Generation Advanced High Strength Steel -- Cracking problem during room temperature cold rolling of three high Al low C ferritic low density-steels -- Effect of Cu on the microstructure and properties of hot rolled low carbon steels -- Role of Cerium on high-temperature oxidation behaviour of low-carbon steel -- High temperature oxidation of T91 alloy -- Development of High Quality SWRH82A Grade Tyre Cord Steel Wire Rods -- Rotary Friction Welding of Cast Nickel Base Superalloy with Martensitic Stainless Steel for Aero Engine Application -- Brittle Fracture Failure Analysis under Mixed-Mode Condition Using Asymmetric Edge Cracked Semicircular (AECS) Configuration -- Analyzing the Effect of Dynamic Impact in 6061 Al Alloy using MATLAB as a post processing tool -- Ratcheting fatigue behaviour of advanced structural materials -- Study of microstructure and mechanical properties of similar and dissimilar FSW of Al 7075 and Mg AZ31 alloys without and with Zn interlayer -- Mechanical and Corrosion Study of Dissimilar Friction Stir Welding of AZ31Mg alloy and Cu-8Zn alloy -- Enhancing Technologies to improve Metallurgical Processes -- Smelting Reduction Technology - Current status and future outlook -- Green Steel Technology: A viable approach for sustainable world -- A review on use of biomass as an alternative to coal for sustainable ironmaking -- Basics of Iron Ore Sintering.

This book presents peer reviewed articles from The International Conference on Metallurgical Engineering and Centenary Celebration (METCENT 2023), held at Indian Institute of Technology (BHU) Varanasi, India from the 26-28th of October 2023. It covers wide areas of metallurgical and materials science, highlighting recent advancements in these areas, including but not limited to Advanced Steels, Computational Material Science, Recent Ferrous/Non-Ferrous Metallurgy Processes, Green Iron and Steel Making Technologies and others. METCENT 2023 provides a unique opportunity to all the Metallurgists, Materials Scientists, Academicians and Industry experts to share their experiences on this special occasion.

ISBN: 9789819968633

Standard No.: 10.1007/978-981-99-6863-3doiSubjects--Topical Terms:

676081
Metallurgy
--Congresses.

LC Class. No.: TN605

Dewey Class. No.: 669

Proceedings of the International Conference on Metallurgical Engineering and Centenary Celebration = METCENT-2023, 26-28 October, Varanasi, India /
LDR:05253nmm a2200337 a 4500 001 2367449
003 DE-He213
005 20231014094930.0
006 m d
007 cr nn 008maaau
008 241127s2024 si s 0 eng d
020 $a 9789819968633 $q (electronic bk.)
020 $a 9789819968626 $q (paper)
024 7 $a 10.1007/978-981-99-6863-3 $2 doi
035 $a 978-981-99-6863-3
040 $a GP $c GP
041 0 $a eng
050 4 $a TN605
072 7 $a TGM $2 bicssc
072 7 $a TEC021000 $2 bisacsh
072 7 $a TGM $2 thema
082 0 4 $a 669 $2 23
090 $a TN605 $b .I61 2023
111 2 $a International Conference on Metallurgical Engineering and Centenary Celebration $d (2023 : $c Varanasi, India) $3 3710580
245 1 0 $a Proceedings of the International Conference on Metallurgical Engineering and Centenary Celebration $h [electronic resource] : $b METCENT-2023, 26-28 October, Varanasi, India / $c edited by Sudipta Patra ... [et al.].
246 3 $a METCENT 2023
260 $a Singapore : $b Springer Nature Singapore : $b Imprint: Springer, $c 2024.
300 $a xii, 402 p. : $b ill. (some col.), digital ; $c 24 cm.
505 0 $a Development of a Low Silica Calcium Aluminate Based Mould Flux for Casting High Al/Mn Steels -- Some Aspects of the Chemistry of Slags containing Cr and V -- Solid state reduction of Hematite ore using hydrogen at moderate temperatures -- Influence of silicon source on the steel cleanness -- Utilization of Biomass Pellets in the Iron Ore Sintering process -- Carbothermic reduction and kinetics of a lean grade multimetallic magnetite ore -- Reduction kinetics of composite steel slag-coke pellets -- Investigating the Suitability of Local Riverbed Sand as a Mold Material for Foundry Industry: A Comparative Study -- Effect of external magnetic field on grain boundary migration in non-magnetic systems: A Phase-field Study -- Deformation in metals: insights from ab-initio Calculations -- Heat Transfer Modelling for a Thermomagnetic Energy Generator Design -- Theoretical Comparison and Machine Learning Based Predictions on Li-Ion Battery's Health Using NASA-Battery Dataset. -- Prediction of Mechanical Properties of Cr-Mn-N Austenitic Stainless Steel using Machine Learning approach -- On the deformation mechanism and dislocation density evolution in a polycrystalline nano copper at 10 K-700 K / 108 s-1-109 s-1 employing molecular dynamics simulations -- Thermodynamic assessment of Tin based Molten Binary Indium-Tin Solder Alloys -- Nanosized hybrid polymer modifiers (HPM) for improved mechanical and thermal behavior of carbon fiber reinforced composites -- Efficient degradation of pendimethalin via photo-catalytic ozonation over Ni/Mg @ TiO2 nanocomposites -- Effect of A-site Pr-doping on Dielectric and Thermoelectric Properties of Lanthanum Based La2FeNbO6 Double Perovskite Oxide Materials -- Investigation of Solidification Behavior and Processing Defects in the Continuous Cast Al-based Composite Sheet -- Influence of Sodium on the Microstructure of Laser Rapid Manufactured NiCrSiBC Hardface Alloy Coatings -- Study of Geometry Modulated Magnetoelectric Composite Structure -- Development of Third Generation Advanced High Strength Steel -- Cracking problem during room temperature cold rolling of three high Al low C ferritic low density-steels -- Effect of Cu on the microstructure and properties of hot rolled low carbon steels -- Role of Cerium on high-temperature oxidation behaviour of low-carbon steel -- High temperature oxidation of T91 alloy -- Development of High Quality SWRH82A Grade Tyre Cord Steel Wire Rods -- Rotary Friction Welding of Cast Nickel Base Superalloy with Martensitic Stainless Steel for Aero Engine Application -- Brittle Fracture Failure Analysis under Mixed-Mode Condition Using Asymmetric Edge Cracked Semicircular (AECS) Configuration -- Analyzing the Effect of Dynamic Impact in 6061 Al Alloy using MATLAB as a post processing tool -- Ratcheting fatigue behaviour of advanced structural materials -- Study of microstructure and mechanical properties of similar and dissimilar FSW of Al 7075 and Mg AZ31 alloys without and with Zn interlayer -- Mechanical and Corrosion Study of Dissimilar Friction Stir Welding of AZ31Mg alloy and Cu-8Zn alloy -- Enhancing Technologies to improve Metallurgical Processes -- Smelting Reduction Technology - Current status and future outlook -- Green Steel Technology: A viable approach for sustainable world -- A review on use of biomass as an alternative to coal for sustainable ironmaking -- Basics of Iron Ore Sintering.
520 $a This book presents peer reviewed articles from The International Conference on Metallurgical Engineering and Centenary Celebration (METCENT 2023), held at Indian Institute of Technology (BHU) Varanasi, India from the 26-28th of October 2023. It covers wide areas of metallurgical and materials science, highlighting recent advancements in these areas, including but not limited to Advanced Steels, Computational Material Science, Recent Ferrous/Non-Ferrous Metallurgy Processes, Green Iron and Steel Making Technologies and others. METCENT 2023 provides a unique opportunity to all the Metallurgists, Materials Scientists, Academicians and Industry experts to share their experiences on this special occasion.
650 0 $a Metallurgy $x Congresses. $3 676081
650 1 4 $a Metals and Alloys. $3 3591895
650 2 4 $a Steel, Light Metal. $3 3591922
650 2 4 $a Corrosion. $3 3595443
650 2 4 $a Ferroelectrics and Multiferroics. $3 3627973
700 1 $a Patra, Sudipta. $3 3710581
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer Nature eBook
856 4 0 $u https://doi.org/10.1007/978-981-99-6863-3
950 $a Chemistry and Materials Science (SpringerNature-11644)