東華大學圖書館 |

Design, Simulation, Modeling, and Implementation of Triboelectric Nanogenerator (TENG) Sensors for Automotive Applications.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Design, Simulation, Modeling, and Implementation of Triboelectric Nanogenerator (TENG) Sensors for Automotive Applications./
作者:	Ali, Sam.
面頁冊數:	1 online resource (248 pages)
附註:	Source: Dissertations Abstracts International, Volume: 84-11, Section: B.
Contained By:	Dissertations Abstracts International84-11B.
標題:	Electrical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30309743click for full text (PQDT)
ISBN:	9798379544379

Design, Simulation, Modeling, and Implementation of Triboelectric Nanogenerator (TENG) Sensors for Automotive Applications.
Ali, Sam.

Design, Simulation, Modeling, and Implementation of Triboelectric Nanogenerator (TENG) Sensors for Automotive Applications. - 1 online resource (248 pages)

Source: Dissertations Abstracts International, Volume: 84-11, Section: B.

Thesis (Ph.D.)--Western Michigan University, 2023.

Includes bibliographical references

Triboelectricity is a promising technique for energy harvesting in which mechanical energy converts to electricity for powering small electronic devices. This method of energy harvesting serves as an alternative to traditional battery power sources and can significantly benefit lowpower sensing applications by generating unlimited electrical energy. This study focuses on the development of flexible triboelectric nanogenerators (TENG) and energy harvesting devices for various applications in the automotive industry.The study is organized into four projects. In the first project, various polymeric materials were used to investigate the performance of different TENGs. Four designs (D1, D2, D3, and D4) of flexible TENGs were successfully fabricated in three different configurations (C1, C2, and C3). The fabricated TENGs consist of a top triboelectrically charged layer made of polyethylene terephthalate (PET), thermoplastic polyurethane (TPU), or fabric for D1, D2, D3, and D4, respectively. The bottom triboelectrically charged substrate is Kapton for designs D1 and D2, and a polydimethylsiloxane (PDMS) layer for designs D3 and D4. Two screen-printed silver electrodes were used for D2 and D4, and two copper electrodes were used for D1 and D3. Multiple configuration cases and fabrication techniques were considered to determine the best material combination for better TENG performance.In the second project, a flexible TENG was successfully designed and tested in a lateral sliding mode. The sliding-TENG consists of a flexible PET as a positively charged triboelectric top layer, a flexible polyvinylidene fluoride (PVDF) as a negatively charged triboelectric bottom layer, and aluminum tapes as electrodes. The fabricated TENG was proposed to be used as a smart seatbelt detector in various automotive applications.In the third project, a screen-printed TENG was successfully fabricated and tested in a lateral sliding direction. The TENG consists of a Kapton film as a negatively charged triboelectric layer; and silver metal as a positively charged triboelectric layer, which was screen-printed in patterns on the inner side of the Kapton film to represent the base electrodes. Silver ink was also printed on the outer sides of the Kapton film to serve as the top and bottom electrodes. The performance of the TENG was simulated using COMSOL Multiphysics® software, and its capability was experimentally investigated in terms of open circuit voltage (Voc), short circuit current (Isc), and power generation.In the fourth project, a novel e-Gear selector based single electrode TENG was successfully fabricated on flexible substrates. The proposed device consists of four TENG sensors (TENG1, TENG2, TENG3, and TENG4) that reflect the traditional gear shift selector (P, R, N, and D). Natural cow leather, natural cotton, heavy-duty paper, and TPU were selected as the bottom triboelectric layers for TENG1, TENG2, TENG3, and TENG4, respectively. Silver ink was screenprinted on the backside of each layer, which represents single electrode sensors. Then, human skin was chosen as the top triboelectric layer. Based on the selection of materials, each TENG device generates different output voltages, which enable the selection of the intended gear mode without the need for a complex control algorithm.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2023

Mode of access: World Wide Web

ISBN: 9798379544379Subjects--Topical Terms:

649834
Electrical engineering.
Subjects--Index Terms:

Energy harvestingIndex Terms--Genre/Form:

542853
Electronic books.

Design, Simulation, Modeling, and Implementation of Triboelectric Nanogenerator (TENG) Sensors for Automotive Applications.
LDR:04778nmm a2200397K 4500 001 2360051
005 20230925052810.5
006 m o d
007 cr mn ---uuuuu
008 241011s2023 xx obm 000 0 eng d
020 $a 9798379544379
035 $a (MiAaPQ)AAI30309743
035 $a AAI30309743
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Ali, Sam. $3 3700663
245 1 0 $a Design, Simulation, Modeling, and Implementation of Triboelectric Nanogenerator (TENG) Sensors for Automotive Applications.
264 0 $c 2023
300 $a 1 online resource (248 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 84-11, Section: B.
500 $a Advisor: Atashbar, Massood Z.
502 $a Thesis (Ph.D.)--Western Michigan University, 2023.
504 $a Includes bibliographical references
520 $a Triboelectricity is a promising technique for energy harvesting in which mechanical energy converts to electricity for powering small electronic devices. This method of energy harvesting serves as an alternative to traditional battery power sources and can significantly benefit lowpower sensing applications by generating unlimited electrical energy. This study focuses on the development of flexible triboelectric nanogenerators (TENG) and energy harvesting devices for various applications in the automotive industry.The study is organized into four projects. In the first project, various polymeric materials were used to investigate the performance of different TENGs. Four designs (D1, D2, D3, and D4) of flexible TENGs were successfully fabricated in three different configurations (C1, C2, and C3). The fabricated TENGs consist of a top triboelectrically charged layer made of polyethylene terephthalate (PET), thermoplastic polyurethane (TPU), or fabric for D1, D2, D3, and D4, respectively. The bottom triboelectrically charged substrate is Kapton for designs D1 and D2, and a polydimethylsiloxane (PDMS) layer for designs D3 and D4. Two screen-printed silver electrodes were used for D2 and D4, and two copper electrodes were used for D1 and D3. Multiple configuration cases and fabrication techniques were considered to determine the best material combination for better TENG performance.In the second project, a flexible TENG was successfully designed and tested in a lateral sliding mode. The sliding-TENG consists of a flexible PET as a positively charged triboelectric top layer, a flexible polyvinylidene fluoride (PVDF) as a negatively charged triboelectric bottom layer, and aluminum tapes as electrodes. The fabricated TENG was proposed to be used as a smart seatbelt detector in various automotive applications.In the third project, a screen-printed TENG was successfully fabricated and tested in a lateral sliding direction. The TENG consists of a Kapton film as a negatively charged triboelectric layer; and silver metal as a positively charged triboelectric layer, which was screen-printed in patterns on the inner side of the Kapton film to represent the base electrodes. Silver ink was also printed on the outer sides of the Kapton film to serve as the top and bottom electrodes. The performance of the TENG was simulated using COMSOL Multiphysics® software, and its capability was experimentally investigated in terms of open circuit voltage (Voc), short circuit current (Isc), and power generation.In the fourth project, a novel e-Gear selector based single electrode TENG was successfully fabricated on flexible substrates. The proposed device consists of four TENG sensors (TENG1, TENG2, TENG3, and TENG4) that reflect the traditional gear shift selector (P, R, N, and D). Natural cow leather, natural cotton, heavy-duty paper, and TPU were selected as the bottom triboelectric layers for TENG1, TENG2, TENG3, and TENG4, respectively. Silver ink was screenprinted on the backside of each layer, which represents single electrode sensors. Then, human skin was chosen as the top triboelectric layer. Based on the selection of materials, each TENG device generates different output voltages, which enable the selection of the intended gear mode without the need for a complex control algorithm.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2023
538 $a Mode of access: World Wide Web
650 4 $a Electrical engineering. $3 649834
650 4 $a Energy. $3 876794
650 4 $a Alternative energy. $3 3436775
653 $a Energy harvesting
653 $a Self powered electronic devices
653 $a Sensors
653 $a Triboelectric nanogenerator
653 $a Automotive applications
655 7 $a Electronic books. $2 lcsh $3 542853
690 $a 0544
690 $a 0363
690 $a 0791
710 2 $a ProQuest Information and Learning Co. $3 783688
710 2 $a Western Michigan University. $b Electrical and Computer Engineering. $3 3170618
773 0 $t Dissertations Abstracts International $g 84-11B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30309743 $z click for full text (PQDT)