東華大學圖書館 |

Large-Eddy Simulation of Marine Propeller Flows Using an Unstructured Overset Method.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Large-Eddy Simulation of Marine Propeller Flows Using an Unstructured Overset Method./
作者:	Kroll, Thomas Bahati.
面頁冊數:	1 online resource (168 pages)
附註:	Source: Dissertations Abstracts International, Volume: 84-08, Section: B.
Contained By:	Dissertations Abstracts International84-08B.
標題:	Aerospace engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30245252click for full text (PQDT)
ISBN:	9798368480732

Large-Eddy Simulation of Marine Propeller Flows Using an Unstructured Overset Method.
Kroll, Thomas Bahati.

Large-Eddy Simulation of Marine Propeller Flows Using an Unstructured Overset Method. - 1 online resource (168 pages)

Source: Dissertations Abstracts International, Volume: 84-08, Section: B.

Thesis (Ph.D.)--University of Minnesota, 2022.

Includes bibliographical references

Maneuvering marine vehicles are often characterized by high Reynolds numbers (Re) and complex geometries with the propeller being an essential component. Studying marine propeller flows computationally or experimentally, requires overcoming the challenges presented by the high Reynolds number and the complex geometries. This dissertation is the first application of a novel unstructured overset method developed by Horne and Mahesh to perform large-eddy simulation (LES) of marine propeller flows. This method enables experimentally validated LES that provides insight into multiple aspects of propeller flows. First, water tunnel interference effects for a marine propeller in both design conditions or forward mode and the off-design condition known as crashback are investigated. Next, the complex, unsteady flow field and resulting loads of a ducted propeller in crashback are deciphered and elucidated. And lastly, the complex vortex interactions in the blade tip region of a ducted propeller in the forward mode of operation are investigated. Past experiments by Jessup studied the marine propeller David Taylor Model Basin (DTMB) 4381 in the open jet test section of the 36-inch variable pressure water tunnel (VPWT). In this dissertation, we perform large-eddy simulation (LES) at design conditions (advance ratio J = 0.889) and propeller diameter based Reynolds number Re = 894, 000 including the VPWT geometry, and demonstrate that interference effects are negligible. In crashback, we explain the significant discrepancy that exists between the mean propeller loads from the VPWT and open-water towing tank (OW) experiments by Ebert. We perform LES at Re = 561, 000 and advance ratios J = −0.50 and −0.82 with the VPWT geometry and compare to an unconfined case at Re = 480, 000 and J = −0.50. Comparison of the LES to the experiments shows good agreement. The water tunnel interference effects responsible for the discrepancy are identified and delineated. It is demonstrated that these effects resemble those of a symmetric solid model or bluff body. Two primary interference effects are identified: solid blockage due to jet expansion and nozzle blockage due to proximity to the tunnel nozzle. Though theoretical correction methodologies exist for forward mode, the impact of interference effects in crashback varies with J, as solid blockage increases for higher |J| while nozzle blockage increases for lower |J|, complicating the possibility of a generalized theoretical correction. Crashback flow of a ducted marine propeller presents a complex, unsteady flow field with resultant unsteady loads. LES results for the marine propeller David Taylor Model Basin (DTMB) 4381 with a neutrally loaded duct are compared to experiments, showing good agreement. The simulations are performed at the propeller diameter based Reynolds number Re = 561, 000 and an advance ratio J = −0.82. The complex flow field around the different components (duct, rotor blades, and stator blades) and their impact on the unsteady loading are examined. The side-force coefficient KS is mostly generated from the duct surface, consistent with experiments. The majority of the thrust and torque coefficients KT and KQ are found to arise from the rotor blades. A prominent contribution to KQ is also produced from the stator blades. Tip-leakage flow between the rotor blade tips and duct surface is shown to play a major role in the local unsteady loads on the rotor blades and duct. The physical mechanisms responsible for the overall unsteady loads and large side-force production are identified as globally, the vortex ring and locally, leading-edge separation as well as tip-leakage flow which forms blade-local recirculation zones on the duct surface. The flow of a ducted propeller in forward mode is often characterized by complex vortex interactions of the tip-leakage vortex (TLV) and trailing-edge vortex (TEV). The resulting tip vortex interactions that occur downstream of the propeller blade tips have been shown to be essential to the flow phenomenon known as cavitation. To study these vortex interactions, two geometrically similar three-bladed propellers P5407 (smaller) and P5206 (larger) were studied in the experiments by Chesnakas and Jessup, Oweis, Judge, Oweis at different propeller tip Reynolds numbers. LES is used to study these complex interactions for a ducted marine propeller P5407 at an advance ratio J = 0.98 and tip Reynolds number Retip = 1.4x106. Good agreement is obtained with the experiment for loads and velocity field. Matching the experimental configuration and boundary conditions is shown to be essential for proper validation. Sensitivity of propeller loads to duct inflow is demonstrated. The TEV is found to be composed of co and counter-rotating small-scale vortices and is not coherent enough to be identified by low-pressure regions. The TLV is revealed to interact with the duct wall boundary layer, inducing upstream, secondary, and counter-rotating vortices. The interaction and merger of these vortices with the TLV forms a complex flow field with increased unsteadiness and pressure fluctuations past 50% chord length downstream of the blade tip, supporting the observations of downstream cavitation inception in the experiments.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2023

Mode of access: World Wide Web

ISBN: 9798368480732Subjects--Topical Terms:

1002622
Aerospace engineering.
Subjects--Index Terms:

Marine propellerIndex Terms--Genre/Form:

542853
Electronic books.

Large-Eddy Simulation of Marine Propeller Flows Using an Unstructured Overset Method.
LDR:06645nmm a2200397K 4500 001 2356826
005 20230619080122.5
006 m o d
007 cr mn ---uuuuu
008 241011s2022 xx obm 000 0 eng d
020 $a 9798368480732
035 $a (MiAaPQ)AAI30245252
035 $a AAI30245252
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Kroll, Thomas Bahati. $3 3697333
245 1 0 $a Large-Eddy Simulation of Marine Propeller Flows Using an Unstructured Overset Method.
264 0 $c 2022
300 $a 1 online resource (168 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 84-08, Section: B.
500 $a Advisor: Mahesh, Krishnan.
502 $a Thesis (Ph.D.)--University of Minnesota, 2022.
504 $a Includes bibliographical references
520 $a Maneuvering marine vehicles are often characterized by high Reynolds numbers (Re) and complex geometries with the propeller being an essential component. Studying marine propeller flows computationally or experimentally, requires overcoming the challenges presented by the high Reynolds number and the complex geometries. This dissertation is the first application of a novel unstructured overset method developed by Horne and Mahesh to perform large-eddy simulation (LES) of marine propeller flows. This method enables experimentally validated LES that provides insight into multiple aspects of propeller flows. First, water tunnel interference effects for a marine propeller in both design conditions or forward mode and the off-design condition known as crashback are investigated. Next, the complex, unsteady flow field and resulting loads of a ducted propeller in crashback are deciphered and elucidated. And lastly, the complex vortex interactions in the blade tip region of a ducted propeller in the forward mode of operation are investigated. Past experiments by Jessup studied the marine propeller David Taylor Model Basin (DTMB) 4381 in the open jet test section of the 36-inch variable pressure water tunnel (VPWT). In this dissertation, we perform large-eddy simulation (LES) at design conditions (advance ratio J = 0.889) and propeller diameter based Reynolds number Re = 894, 000 including the VPWT geometry, and demonstrate that interference effects are negligible. In crashback, we explain the significant discrepancy that exists between the mean propeller loads from the VPWT and open-water towing tank (OW) experiments by Ebert. We perform LES at Re = 561, 000 and advance ratios J = −0.50 and −0.82 with the VPWT geometry and compare to an unconfined case at Re = 480, 000 and J = −0.50. Comparison of the LES to the experiments shows good agreement. The water tunnel interference effects responsible for the discrepancy are identified and delineated. It is demonstrated that these effects resemble those of a symmetric solid model or bluff body. Two primary interference effects are identified: solid blockage due to jet expansion and nozzle blockage due to proximity to the tunnel nozzle. Though theoretical correction methodologies exist for forward mode, the impact of interference effects in crashback varies with J, as solid blockage increases for higher |J| while nozzle blockage increases for lower |J|, complicating the possibility of a generalized theoretical correction. Crashback flow of a ducted marine propeller presents a complex, unsteady flow field with resultant unsteady loads. LES results for the marine propeller David Taylor Model Basin (DTMB) 4381 with a neutrally loaded duct are compared to experiments, showing good agreement. The simulations are performed at the propeller diameter based Reynolds number Re = 561, 000 and an advance ratio J = −0.82. The complex flow field around the different components (duct, rotor blades, and stator blades) and their impact on the unsteady loading are examined. The side-force coefficient KS is mostly generated from the duct surface, consistent with experiments. The majority of the thrust and torque coefficients KT and KQ are found to arise from the rotor blades. A prominent contribution to KQ is also produced from the stator blades. Tip-leakage flow between the rotor blade tips and duct surface is shown to play a major role in the local unsteady loads on the rotor blades and duct. The physical mechanisms responsible for the overall unsteady loads and large side-force production are identified as globally, the vortex ring and locally, leading-edge separation as well as tip-leakage flow which forms blade-local recirculation zones on the duct surface. The flow of a ducted propeller in forward mode is often characterized by complex vortex interactions of the tip-leakage vortex (TLV) and trailing-edge vortex (TEV). The resulting tip vortex interactions that occur downstream of the propeller blade tips have been shown to be essential to the flow phenomenon known as cavitation. To study these vortex interactions, two geometrically similar three-bladed propellers P5407 (smaller) and P5206 (larger) were studied in the experiments by Chesnakas and Jessup, Oweis, Judge, Oweis at different propeller tip Reynolds numbers. LES is used to study these complex interactions for a ducted marine propeller P5407 at an advance ratio J = 0.98 and tip Reynolds number Retip = 1.4x106. Good agreement is obtained with the experiment for loads and velocity field. Matching the experimental configuration and boundary conditions is shown to be essential for proper validation. Sensitivity of propeller loads to duct inflow is demonstrated. The TEV is found to be composed of co and counter-rotating small-scale vortices and is not coherent enough to be identified by low-pressure regions. The TLV is revealed to interact with the duct wall boundary layer, inducing upstream, secondary, and counter-rotating vortices. The interaction and merger of these vortices with the TLV forms a complex flow field with increased unsteadiness and pressure fluctuations past 50% chord length downstream of the blade tip, supporting the observations of downstream cavitation inception in the experiments.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2023
538 $a Mode of access: World Wide Web
650 4 $a Aerospace engineering. $3 1002622
650 4 $a Naval engineering. $3 3173824
650 4 $a Fluid mechanics. $3 528155
653 $a Marine propeller
653 $a Propeller
653 $a Simulation
653 $a Large-Eddy
653 $a Crashback
655 7 $a Electronic books. $2 lcsh $3 542853
690 $a 0538
690 $a 0204
690 $a 0468
710 2 $a ProQuest Information and Learning Co. $3 783688
710 2 $a University of Minnesota. $b Aerospace Engineering and Mechanics. $3 1681609
773 0 $t Dissertations Abstracts International $g 84-08B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30245252 $z click for full text (PQDT)