東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

FindBook

Google Book

Amazon

博客來

Dimensional Metrology and Thermo-Fluid Studies on Additively Manufactured Transpiration Cooling Structures.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Dimensional Metrology and Thermo-Fluid Studies on Additively Manufactured Transpiration Cooling Structures./
作者:	Min, Zheng.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2021,
面頁冊數:	170 p.
附註:	Source: Dissertations Abstracts International, Volume: 83-03, Section: B.
Contained By:	Dissertations Abstracts International83-03B.
標題:	Heat transfer. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28684759
ISBN:	9798544202813

Dimensional Metrology and Thermo-Fluid Studies on Additively Manufactured Transpiration Cooling Structures.
Min, Zheng.

Dimensional Metrology and Thermo-Fluid Studies on Additively Manufactured Transpiration Cooling Structures. - Ann Arbor : ProQuest Dissertations & Theses, 2021 - 170 p.

Source: Dissertations Abstracts International, Volume: 83-03, Section: B.

Thesis (Ph.D.)--University of Pittsburgh, 2021.

This item must not be sold to any third party vendors.

The rapid advancement in metallic additive manufacturing (AM) has provided us with new opportunities and challenges to apply more sophisticated cooling designs to protect high-temperature components in gas turbines. With the benefits of high design freedom and structural complexity, the direct metal laser sintering (DMLS) AM technique can fabricate cooling passages into microscale in a highly compact fashion, making transpiration cooling feasible in turbine airfoil to protect hot surfaces. In this research, an accurate dimensional characterization technique of microscale cooling passages was developed, and the related thermo-fluid performance was studied. The DMLS process produces microchannels with deformations and surface roughness, which significantly impact thermo-fluid performance. The state-of-the-art micro-CT scanners hardly work for intricate AM transpiration cooling structures due mainly to limitations in penetration rate and detection precision on heavy metals. In this research, a high-precision scanning electron microscope (SEM) characterization combined with a multi-level image segmentation method was employed to statistically analyze the geometric dimensions of microchannels made by AM. Based on the characterization results, surface improvement techniques were used to generate expected channel sizes, preparing for the cooling effectiveness studies with various geometric parameters. Most previous experimental studies on transpiration cooling focused only on cooling effectiveness, leaving a significant vacancy in the literature on the heat transfer coefficient (HTC) at the target surfaces. Two classic methods to investigate HTC, the steady-state foil heater method and the transient thermography technique, both fail for transpiration cooling. That is because the foil heater would block numerous coolant outlets, and the transient semi-infinite solid medium theory no longer holds for porous plates. In this study, a micro-lithography technique was employed to precisely coat a patterned surface heater directly on top of the low thermally conductive test plate to determine the HTC distributions. The dimensional variations created by AM fabrication generate inhomogeneity of cooling performance at the target surface. Moreover, the various hole size would cause clogging issues of the smallest channels during operation, which would, in turn, affect the cooling performance as well. A machine learning model was developed in this work to predict cooling effectiveness distributions from these contributing factors.

ISBN: 9798544202813Subjects--Topical Terms:

3391367
Heat transfer.

Dimensional Metrology and Thermo-Fluid Studies on Additively Manufactured Transpiration Cooling Structures.
LDR:03669nmm a2200349 4500 001 2344858
005 20220531062159.5
008 241004s2021 ||||||||||||||||| ||eng d
020 $a 9798544202813
035 $a (MiAaPQ)AAI28684759
035 $a (MiAaPQ)Pittsburgh40472
035 $a AAI28684759
040 $a MiAaPQ $c MiAaPQ
100 1 $a Min, Zheng. $3 3683683
245 1 0 $a Dimensional Metrology and Thermo-Fluid Studies on Additively Manufactured Transpiration Cooling Structures.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2021
300 $a 170 p.
500 $a Source: Dissertations Abstracts International, Volume: 83-03, Section: B.
500 $a Advisor: Chyu, Minking K.
502 $a Thesis (Ph.D.)--University of Pittsburgh, 2021.
506 $a This item must not be sold to any third party vendors.
520 $a The rapid advancement in metallic additive manufacturing (AM) has provided us with new opportunities and challenges to apply more sophisticated cooling designs to protect high-temperature components in gas turbines. With the benefits of high design freedom and structural complexity, the direct metal laser sintering (DMLS) AM technique can fabricate cooling passages into microscale in a highly compact fashion, making transpiration cooling feasible in turbine airfoil to protect hot surfaces. In this research, an accurate dimensional characterization technique of microscale cooling passages was developed, and the related thermo-fluid performance was studied. The DMLS process produces microchannels with deformations and surface roughness, which significantly impact thermo-fluid performance. The state-of-the-art micro-CT scanners hardly work for intricate AM transpiration cooling structures due mainly to limitations in penetration rate and detection precision on heavy metals. In this research, a high-precision scanning electron microscope (SEM) characterization combined with a multi-level image segmentation method was employed to statistically analyze the geometric dimensions of microchannels made by AM. Based on the characterization results, surface improvement techniques were used to generate expected channel sizes, preparing for the cooling effectiveness studies with various geometric parameters. Most previous experimental studies on transpiration cooling focused only on cooling effectiveness, leaving a significant vacancy in the literature on the heat transfer coefficient (HTC) at the target surfaces. Two classic methods to investigate HTC, the steady-state foil heater method and the transient thermography technique, both fail for transpiration cooling. That is because the foil heater would block numerous coolant outlets, and the transient semi-infinite solid medium theory no longer holds for porous plates. In this study, a micro-lithography technique was employed to precisely coat a patterned surface heater directly on top of the low thermally conductive test plate to determine the HTC distributions. The dimensional variations created by AM fabrication generate inhomogeneity of cooling performance at the target surface. Moreover, the various hole size would cause clogging issues of the smallest channels during operation, which would, in turn, affect the cooling performance as well. A machine learning model was developed in this work to predict cooling effectiveness distributions from these contributing factors.
590 $a School code: 0178.
650 4 $a Heat transfer. $3 3391367
650 4 $a Turbines. $3 2139444
650 4 $a Photographs. $3 627415
650 4 $a Gases. $3 559387
650 4 $a Temperature. $3 711968
650 4 $a Calibration. $3 2068745
650 4 $a Neural networks. $3 677449
650 4 $a Microscopy. $3 540544
650 4 $a Design. $3 518875
650 4 $a Laser sintering. $3 3462885
650 4 $a Algorithms. $3 536374
650 4 $a Medical imaging. $3 3172799
650 4 $a Boundary conditions. $3 3560411
650 4 $a Morphology. $3 591167
650 4 $a Industrial engineering. $3 526216
650 4 $a Mathematics. $3 515831
650 4 $a Accuracy. $3 3559958
650 4 $a Investigations. $3 3561159
650 4 $a Ratios. $3 3561161
650 4 $a Efficiency. $3 753744
690 $a 0287
690 $a 0389
690 $a 0574
690 $a 0546
690 $a 0405
710 2 $a University of Pittsburgh. $3 958527
773 0 $t Dissertations Abstracts International $g 83-03B.
790 $a 0178
791 $a Ph.D.
792 $a 2021
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28684759