東華大學圖書館 |

Power Dissipation and Thermal Transport of Two-Dimensional (2D) Electronic Devices.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Power Dissipation and Thermal Transport of Two-Dimensional (2D) Electronic Devices./
作者:	Hemmat, Zahra.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2021,
面頁冊數:	147 p.
附註:	Source: Dissertations Abstracts International, Volume: 83-02, Section: B.
Contained By:	Dissertations Abstracts International83-02B.
標題:	Electrical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28722763
ISBN:	9798534686777

Power Dissipation and Thermal Transport of Two-Dimensional (2D) Electronic Devices.
Hemmat, Zahra.

Power Dissipation and Thermal Transport of Two-Dimensional (2D) Electronic Devices. - Ann Arbor : ProQuest Dissertations & Theses, 2021 - 147 p.

Source: Dissertations Abstracts International, Volume: 83-02, Section: B.

Thesis (Ph.D.)--University of Illinois at Chicago, 2021.

This item must not be sold to any third party vendors.

The preceding decade have witnessed incredible advances in the research of two-dimensional (2D) materials such as graphene, transition metal carbides and nitrides (MXenes), and transition metal dichalcogenides (TMDCs). Since their discovery, 2D materials have enabled the design of nano-scale devices with unique functionalities that are otherwise unavailable in conventional 3D systems. This dissertation focus on the electrical an thermal properties of these materials and presents the study of (1) contribution of the encapsulating layers and (2) surface parameters to the thermal transport at the van der Waals interfaces, (3) synthesis of quasi-binary TMDC alloys through computationally predicted stability maps, and (4) the phase‐dependent band gap engineering in alloys induced by charge density wave (CDW) phases.In the first and second project, power dissipation and thermal management in the nanoscale structures are investigated which is of great importance for the design and operation of energy-efficient 2D nano-devices. Energy transport is heavily dependent of the thermal boundary conductance (TBC) at the van der Waals interfaces, particularly coupling at the interface of 2D channels with their underlying 3D substrates. A low TBC with underlying substrates puts an extrinsic limitation on the ability of 2D materials to conduct heat and dissipate the applied power. In this project a novel self-heating/self-sensing electrical thermometry platform based on atomically thin Ti3C2Tz MXene sheets is developed, which enables experimental investigation of the thermal transport at a Ti3C2Tz/SiO2 interface, with and without an encapsulating layer. Furthermore, the hydrophilic nature and variability of MXene surface terminations together with their metallic nature, provide a new platform to study the effect of the surface parameters on the thermal transport through and along the 2D flakes.In the third project, at theory-guided synthesis approach is employed to achieve 25 unexplored quasi-binary TMDC alloys through computationally predicted stability maps and equilibrium temperature-composition phase diagrams. Compared to other 2D materials, TMDCs exhibit diverse, exciting physical properties, including topological insulator behavior, superconductivity, valley polarization, and superior electrocatalytic activity compared to noble metals. Their properties can be further tuned - or even new properties engineered - by alloying two different elements at either the transition metal or the chalcogen site to form quasi-binary alloys, or by simultaneous alloying at both the sites to form quaternary alloys. The synthesized alloys can be exfoliated into 2D structures, and some of them exhibit: (i) outstanding thermal stability tested up to 1230K, (ii) exceptionally high electrochemical activity for CO2 reduction reaction, (iii) excellent energy efficiency in a high rate Li-air battery, and (iv) high break-down current density for interconnect applications.In the last project, a novel form of bandgap engineering involving alloying non‐isovalent cations in a 2D transition metal dichalcogenide (TMDC) is presented. By alloying semiconducting MoSe2 with metallic NbSe2, two structural phases of Mo0.5Nb0.5Se2, the 1T and 2H phases, are produced each with emergent electronic structure. At room temperature, it is observed that the 1T and 2H phases are semiconducting and metallic, respectively. For the 1T structure, scanning tunneling microscopy/spectroscopy (STM/STS) is used to measure band gaps. Electron diffraction patterns of the 1T structure obtained at room temperature show the presence of a nearly commensurate charge density wave (NCCDW) phase with periodic lattice distortions.

ISBN: 9798534686777Subjects--Topical Terms:

649834
Electrical engineering.
Subjects--Index Terms:

Nanoscale thermal transport

Power Dissipation and Thermal Transport of Two-Dimensional (2D) Electronic Devices.
LDR:05026nmm a2200409 4500 001 2343336
005 20220502104231.5
008 241004s2021 ||||||||||||||||| ||eng d
020 $a 9798534686777
035 $a (MiAaPQ)AAI28722763
035 $a (MiAaPQ)0799vireo2497Hemmat
035 $a AAI28722763
040 $a MiAaPQ $c MiAaPQ
100 1 $a Hemmat, Zahra. $3 3681861
245 1 0 $a Power Dissipation and Thermal Transport of Two-Dimensional (2D) Electronic Devices.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2021
300 $a 147 p.
500 $a Source: Dissertations Abstracts International, Volume: 83-02, Section: B.
500 $a Advisor: Salehi-Khojin, Amin.
502 $a Thesis (Ph.D.)--University of Illinois at Chicago, 2021.
506 $a This item must not be sold to any third party vendors.
520 $a The preceding decade have witnessed incredible advances in the research of two-dimensional (2D) materials such as graphene, transition metal carbides and nitrides (MXenes), and transition metal dichalcogenides (TMDCs). Since their discovery, 2D materials have enabled the design of nano-scale devices with unique functionalities that are otherwise unavailable in conventional 3D systems. This dissertation focus on the electrical an thermal properties of these materials and presents the study of (1) contribution of the encapsulating layers and (2) surface parameters to the thermal transport at the van der Waals interfaces, (3) synthesis of quasi-binary TMDC alloys through computationally predicted stability maps, and (4) the phase‐dependent band gap engineering in alloys induced by charge density wave (CDW) phases.In the first and second project, power dissipation and thermal management in the nanoscale structures are investigated which is of great importance for the design and operation of energy-efficient 2D nano-devices. Energy transport is heavily dependent of the thermal boundary conductance (TBC) at the van der Waals interfaces, particularly coupling at the interface of 2D channels with their underlying 3D substrates. A low TBC with underlying substrates puts an extrinsic limitation on the ability of 2D materials to conduct heat and dissipate the applied power. In this project a novel self-heating/self-sensing electrical thermometry platform based on atomically thin Ti3C2Tz MXene sheets is developed, which enables experimental investigation of the thermal transport at a Ti3C2Tz/SiO2 interface, with and without an encapsulating layer. Furthermore, the hydrophilic nature and variability of MXene surface terminations together with their metallic nature, provide a new platform to study the effect of the surface parameters on the thermal transport through and along the 2D flakes.In the third project, at theory-guided synthesis approach is employed to achieve 25 unexplored quasi-binary TMDC alloys through computationally predicted stability maps and equilibrium temperature-composition phase diagrams. Compared to other 2D materials, TMDCs exhibit diverse, exciting physical properties, including topological insulator behavior, superconductivity, valley polarization, and superior electrocatalytic activity compared to noble metals. Their properties can be further tuned - or even new properties engineered - by alloying two different elements at either the transition metal or the chalcogen site to form quasi-binary alloys, or by simultaneous alloying at both the sites to form quaternary alloys. The synthesized alloys can be exfoliated into 2D structures, and some of them exhibit: (i) outstanding thermal stability tested up to 1230K, (ii) exceptionally high electrochemical activity for CO2 reduction reaction, (iii) excellent energy efficiency in a high rate Li-air battery, and (iv) high break-down current density for interconnect applications.In the last project, a novel form of bandgap engineering involving alloying non‐isovalent cations in a 2D transition metal dichalcogenide (TMDC) is presented. By alloying semiconducting MoSe2 with metallic NbSe2, two structural phases of Mo0.5Nb0.5Se2, the 1T and 2H phases, are produced each with emergent electronic structure. At room temperature, it is observed that the 1T and 2H phases are semiconducting and metallic, respectively. For the 1T structure, scanning tunneling microscopy/spectroscopy (STM/STS) is used to measure band gaps. Electron diffraction patterns of the 1T structure obtained at room temperature show the presence of a nearly commensurate charge density wave (NCCDW) phase with periodic lattice distortions.
590 $a School code: 0799.
650 4 $a Electrical engineering. $3 649834
650 4 $a Mechanical engineering. $3 649730
650 4 $a Thermodynamics. $3 517304
650 4 $a Nanotechnology. $3 526235
650 4 $a Silicon. $3 669429
650 4 $a Metals. $3 601053
650 4 $a Collaboration. $3 3556296
650 4 $a Semiconductors. $3 516162
650 4 $a Gallium arsenide. $3 3681863
650 4 $a Nanomaterials. $3 3558221
650 4 $a Fluorides. $3 620981
650 4 $a Graphene. $3 1569149
650 4 $a Transistors. $3 713271
650 4 $a Heat conductivity. $3 3681489
650 4 $a Lithium. $3 1638490
650 4 $a Scanning electron microscopy. $3 551366
650 4 $a Annealing. $2 lcstt $3 3267268
650 4 $a Transmission electron microscopy. $3 567074
650 4 $a Fourier transforms. $3 3545926
650 4 $a Temperature. $3 711968
650 4 $a Hydrochloric acid. $3 3681864
650 4 $a Chemical vapor deposition. $3 621056
650 4 $a Energy efficiency. $3 3555643
650 4 $a Optical properties. $3 3560260
650 4 $a Engineering. $3 586835
650 4 $a Alloys. $3 654175
650 4 $a Physical properties. $3 3564184
650 4 $a Interfaces. $2 gtt $3 834756
653 $a Nanoscale thermal transport
653 $a Power dissipation
653 $a Transition metal dichalcogenides
653 $a Thermal stability
653 $a Charge density wave
690 $a 0548
690 $a 0544
690 $a 0652
690 $a 0348
690 $a 0537
710 2 $a University of Illinois at Chicago. $b Mechanical and Industrial Engineeirng. $3 3681862
773 0 $t Dissertations Abstracts International $g 83-02B.
790 $a 0799
791 $a Ph.D.
792 $a 2021
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28722763