東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Proceedings of I4SDG Workshop 2023 =...

I4SDG (Workshop) (2023 :)

FindBook

Google Book

Amazon

博客來

Proceedings of I4SDG Workshop 2023 = IFToMM for sustainable development goals /

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Proceedings of I4SDG Workshop 2023/ edited by Victor Petuya ... [et al.].
其他題名:	IFToMM for sustainable development goals /
其他作者:	Petuya, Victor.
團體作者:	I4SDG (Workshop)
出版者:	Cham :Springer Nature Switzerland : : 2023.,
面頁冊數:	1 online resource (xiv, 503 p.) :ill. (chiefly col.), digital ;24 cm.
內容註:	Experimental Investigation to Enhance Performances of MRE in Energy Harvesting -- Dynamic motion evaluation of a novel hybrid Wind & Wave integrated platform -- Model and Control Analysis for a Point absorber wave energy converter in Lebu, Chile -- Novel Pseudo 3D Design of Solar Thermal Facades with Triangle and Trapeze Solar Thermal Collectors for Increased Architectural Acceptanc -- Fast frequency-domain based tool for FOWT platforms preliminary design. -- A framework for improving energy efficiency and sustainability of collaborative robots -- Modeling and Parametric Analysis of Quasi-Translational Parallel Continuum Manipulators -- Energy Efficiency of a SCARA-Like Manipulator with Elastic Balancing -- Deep learning technique to identify abrupt movements in human-robot collaboration -- Planning Real-time Energy Efficient Trajectories for a Two Degrees of Freedom Balanced Serial Manipulator -- Reducing energy consumption and driving torque in an underactuated robotic arm through natural motion -- Online vs offline calibration of 5 DOFs robotic manipulator -- Task-Specific Synthesis and Design of a mobile six-DoF Hexa Parallel Robot for Weed Control -- Optimization of the design parameters of the 6-DOF mobility platform -- Identification of surgical forceps using YOLACT++ -- RehaWrist.q - Development of a 3 DoF Cable-Driven End-Effector Wearable Robot for Rehabilitation of the Wrist Joint -- Lifting Assist Device for Transfer in Cooperation with Caregivers -- Design and prototyping of a semi-wearable robotic leg for sit-to-stand motion assistance of hemiplegic patients -- Comprehensive control strategy design for a wheelchair power-assist device -- Analytical Synthesis of the Seven-Bar Linkage 7-RR(RRRR)RR used for Medical Disinfection Robot -- Design of a Novel Medical Rolling Walker for Use in Hospital Environment -- Influence of design parameters in energy lost for eccentric cam mechanisms with translational roller follower -- Friction Models for a Sustainable Design: Friction Coefficient in Lubricated Conformal Pairs -- Evolution of Gear Machining Technology in a Japanese Manufacturer - Realization of Skiving Method as an Application of 5-Axes Machining Center - -- A vibration exciter for dynamic testing of large structures -- Low Cost 3D printed Pneumatic Linear Actuator -- Development of Orientation Modules with Linear Actuation -- Analytical Synthesis of Five-Bar Linkage 5-RTRTR -- An Automatic Measurement System for Shape Memory Alloys' Wire Resistivity Characterization -- Fault Detection in Induction Machines of Air Handling Units -- Development of a remote-controlled scaled multi-actuated vehicle -- Functional Design and Prototyping of a Novel Soft Fingertip with Variable Stiffness -- Machine-learning based energy estimation on a high-speed transportation system -- Overturning stability for the SNAP Cargo family of pedal‑assisted ultralight vehicles -- Gas bearings applications in automotive fuel cell technology -- Numerical simulation of cylindrical lithium-ion cells impact -- Conceptual design and numerical analysis of a photobioreactor to cultivate Arthrospira -- Movement smoothness metrics in human-machine interaction -- Humanitarian Techniques in the Teaching of Technical Sciences -- Teaching Appropriate Technologies with the Applied Mechanics approach to sensitize students to their future role in environmental sustainability and social justice -- Machine learning algorithm for robotic inverse kinematic problem -- Robot Motion planning in ROS environment -- Intersubjective dynamics in Cooperative Robots -- A code of ethics for social cooperative robots -- Crankshaft balancing design platform: a practical application -- A Drop-In Phase Change Material- Based Augmented Cooling System for Track Capable Vehicles -- Decarbonizing Marine Sector: The Drop - In solution of Marine Sustainable Fuels following their lubricity performance -- On the influence of the actual load sharing factor in increasing the power density in gearboxes -- Driveability Constrained Models for Optimal Control of Hybrid Electric Vehicles -- Lubricant-chemistry kinetic model of antiwear film using structure oriented lumping, quantum chemical molecular dynamics, and machine learning -- Torsional Dynamic Performance of a Transmission Test Bench: an Investigation on the Effect of Motors Controllers Parameters -- Sustainable design of machine guards -- Robotic System for Hand Rehabilitation based on Mirror Therapy -- Development of energy optimization strategies for catenary-free tramways -- Multibody simulation of an underactuated gripper for sustainable waste sorting -- Preliminary study on a handle with haptic devices for collaborative robotics in a remote maintenance environment -- Joint stiffness analysis and TSA-based regulation for underactuated soft grippers with monolithic structure.
Contained By:	Springer Nature eBook
標題:	Sustainable development - Congresses. -
電子資源:	https://doi.org/10.1007/978-3-031-32439-0
ISBN:	9783031324390

Proceedings of I4SDG Workshop 2023 = IFToMM for sustainable development goals /
Proceedings of I4SDG Workshop 2023IFToMM for sustainable development goals /[electronic resource] :edited by Victor Petuya ... [et al.]. - Cham :Springer Nature Switzerland :2023. - 1 online resource (xiv, 503 p.) :ill. (chiefly col.), digital ;24 cm. - Mechanisms and machine science,1342211-0992 ;. - Mechanisms and machine science ;134..

Experimental Investigation to Enhance Performances of MRE in Energy Harvesting -- Dynamic motion evaluation of a novel hybrid Wind & Wave integrated platform -- Model and Control Analysis for a Point absorber wave energy converter in Lebu, Chile -- Novel Pseudo 3D Design of Solar Thermal Facades with Triangle and Trapeze Solar Thermal Collectors for Increased Architectural Acceptanc -- Fast frequency-domain based tool for FOWT platforms preliminary design. -- A framework for improving energy efficiency and sustainability of collaborative robots -- Modeling and Parametric Analysis of Quasi-Translational Parallel Continuum Manipulators -- Energy Efficiency of a SCARA-Like Manipulator with Elastic Balancing -- Deep learning technique to identify abrupt movements in human-robot collaboration -- Planning Real-time Energy Efficient Trajectories for a Two Degrees of Freedom Balanced Serial Manipulator -- Reducing energy consumption and driving torque in an underactuated robotic arm through natural motion -- Online vs offline calibration of 5 DOFs robotic manipulator -- Task-Specific Synthesis and Design of a mobile six-DoF Hexa Parallel Robot for Weed Control -- Optimization of the design parameters of the 6-DOF mobility platform -- Identification of surgical forceps using YOLACT++ -- RehaWrist.q - Development of a 3 DoF Cable-Driven End-Effector Wearable Robot for Rehabilitation of the Wrist Joint -- Lifting Assist Device for Transfer in Cooperation with Caregivers -- Design and prototyping of a semi-wearable robotic leg for sit-to-stand motion assistance of hemiplegic patients -- Comprehensive control strategy design for a wheelchair power-assist device -- Analytical Synthesis of the Seven-Bar Linkage 7-RR(RRRR)RR used for Medical Disinfection Robot -- Design of a Novel Medical Rolling Walker for Use in Hospital Environment -- Influence of design parameters in energy lost for eccentric cam mechanisms with translational roller follower -- Friction Models for a Sustainable Design: Friction Coefficient in Lubricated Conformal Pairs -- Evolution of Gear Machining Technology in a Japanese Manufacturer - Realization of Skiving Method as an Application of 5-Axes Machining Center - -- A vibration exciter for dynamic testing of large structures -- Low Cost 3D printed Pneumatic Linear Actuator -- Development of Orientation Modules with Linear Actuation -- Analytical Synthesis of Five-Bar Linkage 5-RTRTR -- An Automatic Measurement System for Shape Memory Alloys' Wire Resistivity Characterization -- Fault Detection in Induction Machines of Air Handling Units -- Development of a remote-controlled scaled multi-actuated vehicle -- Functional Design and Prototyping of a Novel Soft Fingertip with Variable Stiffness -- Machine-learning based energy estimation on a high-speed transportation system -- Overturning stability for the SNAP Cargo family of pedal‑assisted ultralight vehicles -- Gas bearings applications in automotive fuel cell technology -- Numerical simulation of cylindrical lithium-ion cells impact -- Conceptual design and numerical analysis of a photobioreactor to cultivate Arthrospira -- Movement smoothness metrics in human-machine interaction -- Humanitarian Techniques in the Teaching of Technical Sciences -- Teaching Appropriate Technologies with the Applied Mechanics approach to sensitize students to their future role in environmental sustainability and social justice -- Machine learning algorithm for robotic inverse kinematic problem -- Robot Motion planning in ROS environment -- Intersubjective dynamics in Cooperative Robots -- A code of ethics for social cooperative robots -- Crankshaft balancing design platform: a practical application -- A Drop-In Phase Change Material- Based Augmented Cooling System for Track Capable Vehicles -- Decarbonizing Marine Sector: The Drop - In solution of Marine Sustainable Fuels following their lubricity performance -- On the influence of the actual load sharing factor in increasing the power density in gearboxes -- Driveability Constrained Models for Optimal Control of Hybrid Electric Vehicles -- Lubricant-chemistry kinetic model of antiwear film using structure oriented lumping, quantum chemical molecular dynamics, and machine learning -- Torsional Dynamic Performance of a Transmission Test Bench: an Investigation on the Effect of Motors Controllers Parameters -- Sustainable design of machine guards -- Robotic System for Hand Rehabilitation based on Mirror Therapy -- Development of energy optimization strategies for catenary-free tramways -- Multibody simulation of an underactuated gripper for sustainable waste sorting -- Preliminary study on a handle with haptic devices for collaborative robotics in a remote maintenance environment -- Joint stiffness analysis and TSA-based regulation for underactuated soft grippers with monolithic structure.

This volume contains the proceedings of the 2nd IFToMM Workshop for Sustainable Development Goals - I4SDG 2023 held in Bilbao, Spain, on 22-23 June 2023. The workshop papers are focused on those aspects of the theory, design and applications of Mechanism and Machine Science that are fundamental for moving towards sustainable development. The main topics of the workshop are: sustainable energy systems, robotics and mechatronics, biomechanical and medical systems, education, linkages, gears, transmissions and actuators, engines and powertrains, tribology, transportation machinery, service systems for sustainability, humanitarian engineering and socio-technical systems for sustainable and inclusive development. The contributions, selected through a rigorous international peer-review process, highlight many exciting ideas that will drive new research directions and foster multidisciplinary collaboration between researchers from different backgrounds.

ISBN: 9783031324390

Standard No.: 10.1007/978-3-031-32439-0doiSubjects--Topical Terms:

535177
Sustainable development
--Congresses.

LC Class. No.: HC79.E5

Dewey Class. No.: 338.927

Proceedings of I4SDG Workshop 2023 = IFToMM for sustainable development goals /
LDR:06955nmm a2200337 a 4500 001 2318848
003 DE-He213
005 20230518142006.0
006 m d
007 cr nn 008maaau
008 230902s2023 sz s 0 eng d
020 $a 9783031324390 $q (electronic bk.)
020 $a 9783031324383 $q (paper)
024 7 $a 10.1007/978-3-031-32439-0 $2 doi
035 $a 978-3-031-32439-0
040 $a GP $c GP
041 0 $a eng
050 4 $a HC79.E5
072 7 $a TJFM1 $2 bicssc
072 7 $a TEC037000 $2 bisacsh
072 7 $a TJFM1 $2 thema
082 0 4 $a 338.927 $2 23
090 $a HC79.E5 $b I11 2023
111 2 $a I4SDG (Workshop) $n (2nd : $d 2023 : $c Bilbao, Spain) $3 3634233
245 1 0 $a Proceedings of I4SDG Workshop 2023 $h [electronic resource] : $b IFToMM for sustainable development goals / $c edited by Victor Petuya ... [et al.].
260 $a Cham : $b Springer Nature Switzerland : $b Imprint: Springer, $c 2023.
300 $a 1 online resource (xiv, 503 p.) : $b ill. (chiefly col.), digital ; $c 24 cm.
490 1 $a Mechanisms and machine science, $x 2211-0992 ; $v 134
505 0 $a Experimental Investigation to Enhance Performances of MRE in Energy Harvesting -- Dynamic motion evaluation of a novel hybrid Wind & Wave integrated platform -- Model and Control Analysis for a Point absorber wave energy converter in Lebu, Chile -- Novel Pseudo 3D Design of Solar Thermal Facades with Triangle and Trapeze Solar Thermal Collectors for Increased Architectural Acceptanc -- Fast frequency-domain based tool for FOWT platforms preliminary design. -- A framework for improving energy efficiency and sustainability of collaborative robots -- Modeling and Parametric Analysis of Quasi-Translational Parallel Continuum Manipulators -- Energy Efficiency of a SCARA-Like Manipulator with Elastic Balancing -- Deep learning technique to identify abrupt movements in human-robot collaboration -- Planning Real-time Energy Efficient Trajectories for a Two Degrees of Freedom Balanced Serial Manipulator -- Reducing energy consumption and driving torque in an underactuated robotic arm through natural motion -- Online vs offline calibration of 5 DOFs robotic manipulator -- Task-Specific Synthesis and Design of a mobile six-DoF Hexa Parallel Robot for Weed Control -- Optimization of the design parameters of the 6-DOF mobility platform -- Identification of surgical forceps using YOLACT++ -- RehaWrist.q - Development of a 3 DoF Cable-Driven End-Effector Wearable Robot for Rehabilitation of the Wrist Joint -- Lifting Assist Device for Transfer in Cooperation with Caregivers -- Design and prototyping of a semi-wearable robotic leg for sit-to-stand motion assistance of hemiplegic patients -- Comprehensive control strategy design for a wheelchair power-assist device -- Analytical Synthesis of the Seven-Bar Linkage 7-RR(RRRR)RR used for Medical Disinfection Robot -- Design of a Novel Medical Rolling Walker for Use in Hospital Environment -- Influence of design parameters in energy lost for eccentric cam mechanisms with translational roller follower -- Friction Models for a Sustainable Design: Friction Coefficient in Lubricated Conformal Pairs -- Evolution of Gear Machining Technology in a Japanese Manufacturer - Realization of Skiving Method as an Application of 5-Axes Machining Center - -- A vibration exciter for dynamic testing of large structures -- Low Cost 3D printed Pneumatic Linear Actuator -- Development of Orientation Modules with Linear Actuation -- Analytical Synthesis of Five-Bar Linkage 5-RTRTR -- An Automatic Measurement System for Shape Memory Alloys' Wire Resistivity Characterization -- Fault Detection in Induction Machines of Air Handling Units -- Development of a remote-controlled scaled multi-actuated vehicle -- Functional Design and Prototyping of a Novel Soft Fingertip with Variable Stiffness -- Machine-learning based energy estimation on a high-speed transportation system -- Overturning stability for the SNAP Cargo family of pedal‑assisted ultralight vehicles -- Gas bearings applications in automotive fuel cell technology -- Numerical simulation of cylindrical lithium-ion cells impact -- Conceptual design and numerical analysis of a photobioreactor to cultivate Arthrospira -- Movement smoothness metrics in human-machine interaction -- Humanitarian Techniques in the Teaching of Technical Sciences -- Teaching Appropriate Technologies with the Applied Mechanics approach to sensitize students to their future role in environmental sustainability and social justice -- Machine learning algorithm for robotic inverse kinematic problem -- Robot Motion planning in ROS environment -- Intersubjective dynamics in Cooperative Robots -- A code of ethics for social cooperative robots -- Crankshaft balancing design platform: a practical application -- A Drop-In Phase Change Material- Based Augmented Cooling System for Track Capable Vehicles -- Decarbonizing Marine Sector: The Drop - In solution of Marine Sustainable Fuels following their lubricity performance -- On the influence of the actual load sharing factor in increasing the power density in gearboxes -- Driveability Constrained Models for Optimal Control of Hybrid Electric Vehicles -- Lubricant-chemistry kinetic model of antiwear film using structure oriented lumping, quantum chemical molecular dynamics, and machine learning -- Torsional Dynamic Performance of a Transmission Test Bench: an Investigation on the Effect of Motors Controllers Parameters -- Sustainable design of machine guards -- Robotic System for Hand Rehabilitation based on Mirror Therapy -- Development of energy optimization strategies for catenary-free tramways -- Multibody simulation of an underactuated gripper for sustainable waste sorting -- Preliminary study on a handle with haptic devices for collaborative robotics in a remote maintenance environment -- Joint stiffness analysis and TSA-based regulation for underactuated soft grippers with monolithic structure.
520 $a This volume contains the proceedings of the 2nd IFToMM Workshop for Sustainable Development Goals - I4SDG 2023 held in Bilbao, Spain, on 22-23 June 2023. The workshop papers are focused on those aspects of the theory, design and applications of Mechanism and Machine Science that are fundamental for moving towards sustainable development. The main topics of the workshop are: sustainable energy systems, robotics and mechatronics, biomechanical and medical systems, education, linkages, gears, transmissions and actuators, engines and powertrains, tribology, transportation machinery, service systems for sustainability, humanitarian engineering and socio-technical systems for sustainable and inclusive development. The contributions, selected through a rigorous international peer-review process, highlight many exciting ideas that will drive new research directions and foster multidisciplinary collaboration between researchers from different backgrounds.
650 0 $a Sustainable development $x Congresses. $3 535177
650 1 4 $a Robotic Engineering. $3 3592865
650 2 4 $a Biomedical Engineering and Bioengineering. $3 3381533
650 2 4 $a Sustainability. $3 1029978
700 1 $a Petuya, Victor. $3 1566494
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer Nature eBook
830 0 $a Mechanisms and machine science ; $v 134. $3 3634234
856 4 0 $u https://doi.org/10.1007/978-3-031-32439-0
950 $a Intelligent Technologies and Robotics (SpringerNature-42732)