東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Design and Fabrication of Transporta...

Kiekens, Kelli Cassandra.

FindBook

Google Book

Amazon

博客來

Design and Fabrication of Transportable Micro- Endoscope Systems.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Design and Fabrication of Transportable Micro- Endoscope Systems./
作者:	Kiekens, Kelli Cassandra.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2021,
面頁冊數:	321 p.
附註:	Source: Dissertations Abstracts International, Volume: 82-11, Section: B.
Contained By:	Dissertations Abstracts International82-11B.
標題:	Optics. -
電子資源:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28419075
ISBN:	9798728271581

Design and Fabrication of Transportable Micro- Endoscope Systems.
Kiekens, Kelli Cassandra.

Design and Fabrication of Transportable Micro- Endoscope Systems. - Ann Arbor : ProQuest Dissertations & Theses, 2021 - 321 p.

Source: Dissertations Abstracts International, Volume: 82-11, Section: B.

Thesis (Ph.D.)--The University of Arizona, 2021.

This item must not be sold to any third party vendors.

This dissertation will discuss the design and fabrication of miniature, high-performance endoscopes, and their subsystems for visualization of the fallopian tubes and ovaries. The first chapter contains a review of publications on endoscopes which are 1mm in diameter and smaller. The first chapter then goes through a theoretical description for optical coherence tomography (OCT) and fluorescence. The first chapter also includes a discussion of some of the engineering fundamentals that are used in the design and production of these endoscopes.The second chapter provides a summary of four different projects. The first project describes the design of a piezoelectric tube actuator and cantilevered dual-clad fiber with an intermediate mass for use in a 1.5mm diameter forward-looking, raster scanning imaging system. The second project describes a clinic-ready sub millimeter diameter (~790um) endoscope, called the Falloposcope, which uses a coherent imaging fiber bundle for reflectance and fluorescence imaging and a separate all-fiber side firing OCT probe. The third project describes 3D printing as one solution to the challenge of obtaining sub millimeter diameter, custom optical lenses while keeping production time and cost to a minimum for rapid prototyping. The fourth project is a modified version of the Falloposcope, but with a cell acquiring functionality instead of OCT.The third chapter focuses on future work to be done. The chapter begins with a description of clinical trials for which the Falloposcope has been designed and built. The chapter then describes two potential future projects which build off the present studies. The first project is incorporating a 3D printed lens into an endoscope. The second project is the design of an endoscope centered around a newly available micro detector.

ISBN: 9798728271581Subjects--Topical Terms:

517925
Optics.
Subjects--Index Terms:

Endoscope

Design and Fabrication of Transportable Micro- Endoscope Systems.
LDR:02968nmm a2200373 4500 001 2285211
005 20211129124008.5
008 220723s2021 ||||||||||||||||| ||eng d
020 $a 9798728271581
035 $a (MiAaPQ)AAI28419075
035 $a AAI28419075
040 $a MiAaPQ $c MiAaPQ
100 1 $a Kiekens, Kelli Cassandra. $3 3564500
245 1 0 $a Design and Fabrication of Transportable Micro- Endoscope Systems.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2021
300 $a 321 p.
500 $a Source: Dissertations Abstracts International, Volume: 82-11, Section: B.
500 $a Advisor: Barton, Jennifer K.
502 $a Thesis (Ph.D.)--The University of Arizona, 2021.
506 $a This item must not be sold to any third party vendors.
520 $a This dissertation will discuss the design and fabrication of miniature, high-performance endoscopes, and their subsystems for visualization of the fallopian tubes and ovaries. The first chapter contains a review of publications on endoscopes which are 1mm in diameter and smaller. The first chapter then goes through a theoretical description for optical coherence tomography (OCT) and fluorescence. The first chapter also includes a discussion of some of the engineering fundamentals that are used in the design and production of these endoscopes.The second chapter provides a summary of four different projects. The first project describes the design of a piezoelectric tube actuator and cantilevered dual-clad fiber with an intermediate mass for use in a 1.5mm diameter forward-looking, raster scanning imaging system. The second project describes a clinic-ready sub millimeter diameter (~790um) endoscope, called the Falloposcope, which uses a coherent imaging fiber bundle for reflectance and fluorescence imaging and a separate all-fiber side firing OCT probe. The third project describes 3D printing as one solution to the challenge of obtaining sub millimeter diameter, custom optical lenses while keeping production time and cost to a minimum for rapid prototyping. The fourth project is a modified version of the Falloposcope, but with a cell acquiring functionality instead of OCT.The third chapter focuses on future work to be done. The chapter begins with a description of clinical trials for which the Falloposcope has been designed and built. The chapter then describes two potential future projects which build off the present studies. The first project is incorporating a 3D printed lens into an endoscope. The second project is the design of an endoscope centered around a newly available micro detector.
590 $a School code: 0009.
650 4 $a Optics. $3 517925
650 4 $a Biomedical engineering. $3 535387
650 4 $a Engineering. $3 586835
650 4 $a Design. $3 518875
653 $a Endoscope
653 $a Fluorescence
653 $a Optical Coherence Tomography
653 $a Re-engineering
690 $a 0752
690 $a 0541
690 $a 0537
690 $a 0389
710 2 $a The University of Arizona. $b Optical Sciences. $3 1019548
773 0 $t Dissertations Abstracts International $g 82-11B.
790 $a 0009
791 $a Ph.D.
792 $a 2021
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28419075