東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Design and Implementation of Ga2O3 D...

Bunk, Ryan James.

FindBook

Google Book

Amazon

博客來

Design and Implementation of Ga2O3 Deep-Uv Photodetectors with Improved Intrinsic Solar Band Rejection.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Design and Implementation of Ga2O3 Deep-Uv Photodetectors with Improved Intrinsic Solar Band Rejection./
作者:	Bunk, Ryan James.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2020,
面頁冊數:	63 p.
附註:	Source: Masters Abstracts International, Volume: 82-03.
Contained By:	Masters Abstracts International82-03.
標題:	Electrical engineering. -
電子資源:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27995172
ISBN:	9798672161310

Design and Implementation of Ga2O3 Deep-Uv Photodetectors with Improved Intrinsic Solar Band Rejection.
Bunk, Ryan James.

Design and Implementation of Ga2O3 Deep-Uv Photodetectors with Improved Intrinsic Solar Band Rejection. - Ann Arbor : ProQuest Dissertations & Theses, 2020 - 63 p.

Source: Masters Abstracts International, Volume: 82-03.

Thesis (M.S.)--University of California, Davis, 2020.

This item must not be sold to any third party vendors.

In the recent past, demand for photodetectors with intrinsic band rejection increased as both civilian and military markets realized the potential of this type of device. The main factor influencing this interest are their inherent design simplicity, as cheaper but broad-band photodetector materials such as gallium arsenide (GaAs) and silicon (Si) would have very difficult filter requirements to adequately suppress the entire solar spectrum. On the other hand, exploiting the fundamental band gap of a semiconductor to provide band rejection would at minimum require no more complexity than two metal contacts and a homogenous substrate. A strong contender to fill this technology gap is β-Ga2O3, with a fundamental band gap of 4.9 eV and the commercially realized ability to be produced as bulk wafer substrates. This enormous promise falls apart upon closer examination due to the fundamental physics of the β-Ga2O3 system, in particular due to hole self-trapping. However, in the process of examining this material, several design strategies for the design of solar-blind detectors were found. Internal photoemission was identified as one of the primary mechanisms leading to solar-band response, and techniques were studied and implemented to minimize internal photoemission at the contacts.

ISBN: 9798672161310Subjects--Topical Terms:

649834
Electrical engineering.
Subjects--Index Terms:

Photodetectors

Design and Implementation of Ga2O3 Deep-Uv Photodetectors with Improved Intrinsic Solar Band Rejection.
LDR:02370nmm a2200337 4500 001 2281233
005 20210910100648.5
008 220723s2020 ||||||||||||||||| ||eng d
020 $a 9798672161310
035 $a (MiAaPQ)AAI27995172
035 $a AAI27995172
040 $a MiAaPQ $c MiAaPQ
100 1 $a Bunk, Ryan James. $3 3559820
245 1 0 $a Design and Implementation of Ga2O3 Deep-Uv Photodetectors with Improved Intrinsic Solar Band Rejection.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2020
300 $a 63 p.
500 $a Source: Masters Abstracts International, Volume: 82-03.
500 $a Advisor: Woodall, Jerry.
502 $a Thesis (M.S.)--University of California, Davis, 2020.
506 $a This item must not be sold to any third party vendors.
520 $a In the recent past, demand for photodetectors with intrinsic band rejection increased as both civilian and military markets realized the potential of this type of device. The main factor influencing this interest are their inherent design simplicity, as cheaper but broad-band photodetector materials such as gallium arsenide (GaAs) and silicon (Si) would have very difficult filter requirements to adequately suppress the entire solar spectrum. On the other hand, exploiting the fundamental band gap of a semiconductor to provide band rejection would at minimum require no more complexity than two metal contacts and a homogenous substrate. A strong contender to fill this technology gap is β-Ga2O3, with a fundamental band gap of 4.9 eV and the commercially realized ability to be produced as bulk wafer substrates. This enormous promise falls apart upon closer examination due to the fundamental physics of the β-Ga2O3 system, in particular due to hole self-trapping. However, in the process of examining this material, several design strategies for the design of solar-blind detectors were found. Internal photoemission was identified as one of the primary mechanisms leading to solar-band response, and techniques were studied and implemented to minimize internal photoemission at the contacts.
590 $a School code: 0029.
650 4 $a Electrical engineering. $3 649834
650 4 $a Optics. $3 517925
653 $a Photodetectors
653 $a Solar-blind
653 $a β-Ga2O3
690 $a 0544
690 $a 0752
710 2 $a University of California, Davis. $b Electrical and Computer Engineering. $3 1672487
773 0 $t Masters Abstracts International $g 82-03.
790 $a 0029
791 $a M.S.
792 $a 2020
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27995172