東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Analysis of Ship Bulkhead Swage Panels.

Kubsad, Chethan Nandeesh.

FindBook

Google Book

Amazon

博客來

Analysis of Ship Bulkhead Swage Panels.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Analysis of Ship Bulkhead Swage Panels./
作者:	Kubsad, Chethan Nandeesh.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2020,
面頁冊數:	50 p.
附註:	Source: Masters Abstracts International, Volume: 82-05.
Contained By:	Masters Abstracts International82-05.
標題:	Civil engineering. -
電子資源:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28149689
ISBN:	9798678139740

Analysis of Ship Bulkhead Swage Panels.
Kubsad, Chethan Nandeesh.

Analysis of Ship Bulkhead Swage Panels. - Ann Arbor : ProQuest Dissertations & Theses, 2020 - 50 p.

Source: Masters Abstracts International, Volume: 82-05.

Thesis (M.S.)--San Diego State University, 2020.

This item must not be sold to any third party vendors.

A ship's floor is normally referred to as the deck and the interior walls of a ship are called bulkheads. The ship's bulkhead typically consists of an upright wall within the hull of a ship. The bulkhead separates the hull into different compartments. Bulkheads increase the structural rigidity of the ship. Bulkheads can now be made using swage-panels, which are the fundamental components that resist shear and compressive loads. This replaces traditionally stiffened plates. Swaging is a manufacturing process for shaping. Swaging results in taking an object, and giving it a ridge, groove or some shape of mold.Swage panels used in the presented analysis are fabricated using thin steel plates. These plates are roll-pressed onto a series of half-circular, solid cylinders at very high temperature. The swaging fabrication process forms bumps in the cross-section along the full length of the plate, which increases stiffness and strength. The highlight of the process is that swaging substitutes the need for welded-on stiffeners at certain constant spacing. Swage panels have shown many advantages over traditionally welded-on stiffeners panels. The key advantages include reduced material usage, reduced labor costs, reduced turnaround time otherwise consumed by welding, and significantly reduced maintenance.In the thesis, "finite element analysis" (FEA) was used to model swage panels using ABAQUS/CAE software. Nonlinear homogeneous shell elements and displacement-controlled loading conditions similar to laboratory setup were applied for FEA analysis. Software analysis and actual lab setup results were compared and outlined. Most of the analysis results closely matched the lab results. These types of analysis and physical testing of swage panels have resulted in new national and international design codes for commercial ships. The thesis further recommends consideration of residual stress effects for improved post-peak behavior for compression analysis.

ISBN: 9798678139740Subjects--Topical Terms:

860360
Civil engineering.
Subjects--Index Terms:

Ship bulkhead swage panels

Analysis of Ship Bulkhead Swage Panels.
LDR:03356nmm a2200481 4500 001 2280293
005 20210830065535.5
008 220723s2020 ||||||||||||||||| ||eng d
020 $a 9798678139740
035 $a (MiAaPQ)AAI28149689
035 $a AAI28149689
040 $a MiAaPQ $c MiAaPQ
100 1 $a Kubsad, Chethan Nandeesh. $3 3558804
245 1 0 $a Analysis of Ship Bulkhead Swage Panels.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2020
300 $a 50 p.
500 $a Source: Masters Abstracts International, Volume: 82-05.
500 $a Advisor: Dowell, Robert K.
502 $a Thesis (M.S.)--San Diego State University, 2020.
506 $a This item must not be sold to any third party vendors.
520 $a A ship's floor is normally referred to as the deck and the interior walls of a ship are called bulkheads. The ship's bulkhead typically consists of an upright wall within the hull of a ship. The bulkhead separates the hull into different compartments. Bulkheads increase the structural rigidity of the ship. Bulkheads can now be made using swage-panels, which are the fundamental components that resist shear and compressive loads. This replaces traditionally stiffened plates. Swaging is a manufacturing process for shaping. Swaging results in taking an object, and giving it a ridge, groove or some shape of mold.Swage panels used in the presented analysis are fabricated using thin steel plates. These plates are roll-pressed onto a series of half-circular, solid cylinders at very high temperature. The swaging fabrication process forms bumps in the cross-section along the full length of the plate, which increases stiffness and strength. The highlight of the process is that swaging substitutes the need for welded-on stiffeners at certain constant spacing. Swage panels have shown many advantages over traditionally welded-on stiffeners panels. The key advantages include reduced material usage, reduced labor costs, reduced turnaround time otherwise consumed by welding, and significantly reduced maintenance.In the thesis, "finite element analysis" (FEA) was used to model swage panels using ABAQUS/CAE software. Nonlinear homogeneous shell elements and displacement-controlled loading conditions similar to laboratory setup were applied for FEA analysis. Software analysis and actual lab setup results were compared and outlined. Most of the analysis results closely matched the lab results. These types of analysis and physical testing of swage panels have resulted in new national and international design codes for commercial ships. The thesis further recommends consideration of residual stress effects for improved post-peak behavior for compression analysis.
590 $a School code: 0220.
650 4 $a Civil engineering. $3 860360
650 4 $a Design. $3 518875
650 4 $a Materials science. $3 543314
650 4 $a Naval engineering. $3 3173824
650 4 $a Transportation. $3 555912
653 $a Ship bulkhead swage panels
653 $a Ship deck
653 $a Ship hull
653 $a Structural rigidity
653 $a Compressive loads
653 $a Shear loads
653 $a Stiffened plates
653 $a Shaping process
653 $a Steel
653 $a Swaging fabrication process
653 $a ABAQUS/CAE software
653 $a Commercial ship design
690 $a 0543
690 $a 0389
690 $a 0794
690 $a 0468
690 $a 0709
710 2 $a San Diego State University. $b Civil Engineering. $3 2104599
773 0 $t Masters Abstracts International $g 82-05.
790 $a 0220
791 $a M.S.
792 $a 2020
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28149689