東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Multi-axial active isolation for sei...

Chang, Chia-Ming.

FindBook

Google Book

Amazon

博客來

Multi-axial active isolation for seismic protection of buildings.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Multi-axial active isolation for seismic protection of buildings./
作者:	Chang, Chia-Ming.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2011,
面頁冊數:	278 p.
附註:	Source: Dissertations Abstracts International, Volume: 73-10, Section: B.
Contained By:	Dissertations Abstracts International73-10B.
標題:	Geophysical. -
電子資源:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3503223
ISBN:	9781267267436

Multi-axial active isolation for seismic protection of buildings.
Chang, Chia-Ming.

Multi-axial active isolation for seismic protection of buildings. - Ann Arbor : ProQuest Dissertations & Theses, 2011 - 278 p.

Source: Dissertations Abstracts International, Volume: 73-10, Section: B.

Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2011.

Structural control technology has been widely accepted as an effective means for the protection of structures against seismic hazards. Passive base isolation is one of the common structural control techniques used to enhance the performance of structures subjected to severe earthquake excitations. Isolation bearings employed at the base of a structure naturally increase its flexibility, but concurrently result in large base displacements. The combination of base isolation with active control, i.e., active base isolation, creates the possibility of achieving a balanced level of control performance, reducing both floor accelerations as well as base displacements. Many theoretical papers have been written by researchers regarding active base isolation, and a few experiments have been performed to verify these theories; however, challenges in appropriately scaling the structural system and modeling the complex nature of control-structure interaction have limited the applicability of these results. Moreover, most experiments only focus on the implementation of active base isolation under unidirectional excitations. Earthquakes are intrinsically multi-dimensional, resulting in out-of-plane responses, including torsional responses. Therefore, an active isolation system for buildings using multi-axial active control devices against multi-directional excitations must be considered. The focus of this dissertation is the development and experimental verification of active isolation strategies for multi-story buildings subjected to bi-directional earthquake loadings. First, a model building is designed to match the characteristics of a representative full-scale structure. The selected isolation bearings feature low friction and high vertical stiffness, providing stable behavior. In the context of the multi-dimensional response control, three, custom-manufactured actuators are employed to mitigate both in-plane and out-of-plane responses. To obtain a high-fidelity model of the active isolation systems, a hybrid identification approach is used which combines the advantages of the lumped mass model and nonparametric methods. Control-structure interaction (CSI) is also included in the identified model to further enhance the control authority. By employing the H2/LQG control algorithm, the controllers for the hydraulic actuators promise high performance and good robustness. The active isolation is found to possess the ability to reduce base displacements, as well as producing comparable accelerations over the passive isolation. The proposed active isolation strategies are validated experimentally for a six-story building tested on the six degree-of-freedom shake table in the Smart Structures Technology Laboratory at the University of Illinois at Urbana-Champaign.

ISBN: 9781267267436Subjects--Topical Terms:

3558641
Geophysical.
Subjects--Index Terms:

Active control

Multi-axial active isolation for seismic protection of buildings.
LDR:03948nmm a2200373 4500 001 2280137
005 20210823093220.5
008 220723s2011 ||||||||||||||||| ||eng d
020 $a 9781267267436
035 $a (MiAaPQ)AAI3503223
035 $a (MiAaPQ)29690
035 $a AAI3503223
040 $a MiAaPQ $c MiAaPQ
100 1 $a Chang, Chia-Ming. $3 1259297
245 1 0 $a Multi-axial active isolation for seismic protection of buildings.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2011
300 $a 278 p.
500 $a Source: Dissertations Abstracts International, Volume: 73-10, Section: B.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Spencer, Billie F., Jr.
502 $a Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2011.
520 $a Structural control technology has been widely accepted as an effective means for the protection of structures against seismic hazards. Passive base isolation is one of the common structural control techniques used to enhance the performance of structures subjected to severe earthquake excitations. Isolation bearings employed at the base of a structure naturally increase its flexibility, but concurrently result in large base displacements. The combination of base isolation with active control, i.e., active base isolation, creates the possibility of achieving a balanced level of control performance, reducing both floor accelerations as well as base displacements. Many theoretical papers have been written by researchers regarding active base isolation, and a few experiments have been performed to verify these theories; however, challenges in appropriately scaling the structural system and modeling the complex nature of control-structure interaction have limited the applicability of these results. Moreover, most experiments only focus on the implementation of active base isolation under unidirectional excitations. Earthquakes are intrinsically multi-dimensional, resulting in out-of-plane responses, including torsional responses. Therefore, an active isolation system for buildings using multi-axial active control devices against multi-directional excitations must be considered. The focus of this dissertation is the development and experimental verification of active isolation strategies for multi-story buildings subjected to bi-directional earthquake loadings. First, a model building is designed to match the characteristics of a representative full-scale structure. The selected isolation bearings feature low friction and high vertical stiffness, providing stable behavior. In the context of the multi-dimensional response control, three, custom-manufactured actuators are employed to mitigate both in-plane and out-of-plane responses. To obtain a high-fidelity model of the active isolation systems, a hybrid identification approach is used which combines the advantages of the lumped mass model and nonparametric methods. Control-structure interaction (CSI) is also included in the identified model to further enhance the control authority. By employing the H2/LQG control algorithm, the controllers for the hydraulic actuators promise high performance and good robustness. The active isolation is found to possess the ability to reduce base displacements, as well as producing comparable accelerations over the passive isolation. The proposed active isolation strategies are validated experimentally for a six-story building tested on the six degree-of-freedom shake table in the Smart Structures Technology Laboratory at the University of Illinois at Urbana-Champaign.
590 $a School code: 0090.
650 4 $a Geophysical. $3 3558641
650 4 $a Civil engineering. $3 860360
650 4 $a Mechanical engineering. $3 649730
653 $a Active control
653 $a Base isolation
653 $a Earthquakes
653 $a Seismic protection
690 $a 0467
690 $a 0543
690 $a 0548
710 2 $a University of Illinois at Urbana-Champaign. $b Civil & Environmental Eng. $3 2100706
773 0 $t Dissertations Abstracts International $g 73-10B.
790 $a 0090
791 $a Ph.D.
792 $a 2011
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3503223