東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Zinc Oxide Nanorods (ZnO NRs) for Ph...

Ishwein, Zahra.

FindBook

Google Book

Amazon

博客來

Zinc Oxide Nanorods (ZnO NRs) for Photovoltaic Applications.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Zinc Oxide Nanorods (ZnO NRs) for Photovoltaic Applications./
作者:	Ishwein, Zahra.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2019,
面頁冊數:	229 p.
附註:	Source: Dissertations Abstracts International, Volume: 82-01, Section: B.
Contained By:	Dissertations Abstracts International82-01B.
標題:	Condensed matter physics. -
電子資源:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27990301
ISBN:	9798643189169

Zinc Oxide Nanorods (ZnO NRs) for Photovoltaic Applications.
Ishwein, Zahra.

Zinc Oxide Nanorods (ZnO NRs) for Photovoltaic Applications. - Ann Arbor : ProQuest Dissertations & Theses, 2019 - 229 p.

Source: Dissertations Abstracts International, Volume: 82-01, Section: B.

Thesis (Ph.D.)--University of Northumbria at Newcastle (United Kingdom), 2019.

This item must not be sold to any third party vendors.

Zinc oxide (ZnO) is a material that has highly attractive cost-effective features and can be grown using different methods leading to a wide range of nanostructured morphologies. In this work, zinc oxide nanorods (ZnO NRs) with various surface distribution density were sensitised using aqueous solutions based on zinc salt at 40°C-85°C. Systematic investigations were carried out on the influences of zinc salt, different ZnO seed layer thickness and growth temperature (Tgrowth). The grown ZnO NRs were used in two different aspects. The first aspect was to grow the NRs on a releasable layer and here Omnicaot was used as a sacrificial layer and SU-8 photoresist as a support structural layer to reach the desired aim. Also, ZnO NRs were grown on polydimethylsiloxane (PDMS). This was used to improve the performance of different types of solar cells by mounting the full structure on top with help of optical gel. The results obtained showed that wet lift-off showed an increasing ɳ from 1.56% to 2.05% when a GaAs solar cell was used, whereas the same solar cell showed an efficiency ɳ increasing to about 2.03% when using dry peel-off nanostructures. CZTSSe (Cu2ZnSn(S,Se)4) solar cells showed an increase in ɳ from 1.3% to (1.79%, 1.65% and 2.15%) for ZnO NRs/SU-8, ZnO NRs/PDMS and flower-like/diluted PDMS, respectively. The second aspect was to fabricate extremely thin absorber solar cells. For lift-off process, the work presented herein provides a cost-effective, simple novel combination of lift-off processing with hydrothermally grown ZnO NRs on SU-8 or PDMS, in a low temperature range Tgrowth from 40°C- 85°C. This study addresses a controllable release/transfer of ZnO NRs when high growth temperature represents a barrier to carrying out an immediate growth on flexible substrates for example wearable electronics applications. The evolution of ZnO NRs with Tgrowth were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and UV-Vis spectroscopy. The ZnO NRs/SU-8 and ZnO NRs/PDMS structures were successfully detached from the glass. The SEM images confirmed that, the ZnO NRs formed different diameters and lengths as Tgrowth increased. Transmitted/scattered light characteristics showed different trends depending on the Tgrowth and structure stack used. The findings of this study offer an easy method of lift-off ZnO NRs (and subsequent stack of layers) using the low-cost facilities and at low temperature. Current-voltage (I-V) and external quantum efficiency (EQE) measurements showed an affective influence of mounting the released ZnO NRs on CZTS and GaAs solar cells. Moreover, a study on ETA cell fabrication using CZTS is presented. The fabricated ETA cell structure was as the following: glass/ITO/ZnO seed/ZnO NRs/CdS/CZTS/P3HT/gold and the aim is for the CdS/CZTS to conformally coat the ZnO NRs, while P3HT acts as a hole transport layer which in turn helps avoiding shunting. ETA cell showed about 0.02% of efficiency (ɳ), 0.05V (Voc), 0.15mA/cm2 (Jsc), 27.46% (FF) and about 20% EQE in the 300nm-600nm spectra region. These results are clear indication of promising sight for ETA solar cells based on CZTS nanoparticles which can be more improved.

ISBN: 9798643189169Subjects--Topical Terms:

3173567
Condensed matter physics.
Subjects--Index Terms:

Solar cells

Zinc Oxide Nanorods (ZnO NRs) for Photovoltaic Applications.
LDR:04398nmm a2200361 4500 001 2277320
005 20210521101656.5
008 220723s2019 ||||||||||||||||| ||eng d
020 $a 9798643189169
035 $a (MiAaPQ)AAI27990301
035 $a (MiAaPQ)Northumbria_42592
035 $a AAI27990301
040 $a MiAaPQ $c MiAaPQ
100 1 $a Ishwein, Zahra. $3 3555633
245 1 0 $a Zinc Oxide Nanorods (ZnO NRs) for Photovoltaic Applications.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 229 p.
500 $a Source: Dissertations Abstracts International, Volume: 82-01, Section: B.
500 $a Advisor: Barrioz, Vincent;Zoppi, Guillaume;Beattie, Neil;Qu, Yongtao.
502 $a Thesis (Ph.D.)--University of Northumbria at Newcastle (United Kingdom), 2019.
506 $a This item must not be sold to any third party vendors.
520 $a Zinc oxide (ZnO) is a material that has highly attractive cost-effective features and can be grown using different methods leading to a wide range of nanostructured morphologies. In this work, zinc oxide nanorods (ZnO NRs) with various surface distribution density were sensitised using aqueous solutions based on zinc salt at 40°C-85°C. Systematic investigations were carried out on the influences of zinc salt, different ZnO seed layer thickness and growth temperature (Tgrowth). The grown ZnO NRs were used in two different aspects. The first aspect was to grow the NRs on a releasable layer and here Omnicaot was used as a sacrificial layer and SU-8 photoresist as a support structural layer to reach the desired aim. Also, ZnO NRs were grown on polydimethylsiloxane (PDMS). This was used to improve the performance of different types of solar cells by mounting the full structure on top with help of optical gel. The results obtained showed that wet lift-off showed an increasing ɳ from 1.56% to 2.05% when a GaAs solar cell was used, whereas the same solar cell showed an efficiency ɳ increasing to about 2.03% when using dry peel-off nanostructures. CZTSSe (Cu2ZnSn(S,Se)4) solar cells showed an increase in ɳ from 1.3% to (1.79%, 1.65% and 2.15%) for ZnO NRs/SU-8, ZnO NRs/PDMS and flower-like/diluted PDMS, respectively. The second aspect was to fabricate extremely thin absorber solar cells. For lift-off process, the work presented herein provides a cost-effective, simple novel combination of lift-off processing with hydrothermally grown ZnO NRs on SU-8 or PDMS, in a low temperature range Tgrowth from 40°C- 85°C. This study addresses a controllable release/transfer of ZnO NRs when high growth temperature represents a barrier to carrying out an immediate growth on flexible substrates for example wearable electronics applications. The evolution of ZnO NRs with Tgrowth were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and UV-Vis spectroscopy. The ZnO NRs/SU-8 and ZnO NRs/PDMS structures were successfully detached from the glass. The SEM images confirmed that, the ZnO NRs formed different diameters and lengths as Tgrowth increased. Transmitted/scattered light characteristics showed different trends depending on the Tgrowth and structure stack used. The findings of this study offer an easy method of lift-off ZnO NRs (and subsequent stack of layers) using the low-cost facilities and at low temperature. Current-voltage (I-V) and external quantum efficiency (EQE) measurements showed an affective influence of mounting the released ZnO NRs on CZTS and GaAs solar cells. Moreover, a study on ETA cell fabrication using CZTS is presented. The fabricated ETA cell structure was as the following: glass/ITO/ZnO seed/ZnO NRs/CdS/CZTS/P3HT/gold and the aim is for the CdS/CZTS to conformally coat the ZnO NRs, while P3HT acts as a hole transport layer which in turn helps avoiding shunting. ETA cell showed about 0.02% of efficiency (ɳ), 0.05V (Voc), 0.15mA/cm2 (Jsc), 27.46% (FF) and about 20% EQE in the 300nm-600nm spectra region. These results are clear indication of promising sight for ETA solar cells based on CZTS nanoparticles which can be more improved.
590 $a School code: 5060.
650 4 $a Condensed matter physics. $3 3173567
650 4 $a Materials science. $3 543314
650 4 $a Alternative energy. $3 3436775
650 4 $a Nanotechnology. $3 526235
653 $a Solar cells
653 $a Zinc oxide
690 $a 0794
690 $a 0652
690 $a 0611
690 $a 0363
710 2 $a University of Northumbria at Newcastle (United Kingdom). $3 3545556
773 0 $t Dissertations Abstracts International $g 82-01B.
790 $a 5060
791 $a Ph.D.
792 $a 2019
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27990301