東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Understanding the Interfacial Reacti...

Lochala, Joshua A.

FindBook

Google Book

Amazon

博客來

Understanding the Interfacial Reactions Initiating on Lithium Metal Surfaces in Next-Generation Battery Technologies.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Understanding the Interfacial Reactions Initiating on Lithium Metal Surfaces in Next-Generation Battery Technologies./
作者:	Lochala, Joshua A.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2020,
面頁冊數:	121 p.
附註:	Source: Dissertations Abstracts International, Volume: 82-03, Section: B.
Contained By:	Dissertations Abstracts International82-03B.
標題:	Inorganic chemistry. -
電子資源:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28029205
ISBN:	9798662577374

Understanding the Interfacial Reactions Initiating on Lithium Metal Surfaces in Next-Generation Battery Technologies.
Lochala, Joshua A.

Understanding the Interfacial Reactions Initiating on Lithium Metal Surfaces in Next-Generation Battery Technologies. - Ann Arbor : ProQuest Dissertations & Theses, 2020 - 121 p.

Source: Dissertations Abstracts International, Volume: 82-03, Section: B.

Thesis (Ph.D.)--University of Arkansas, 2020.

This item must not be sold to any third party vendors.

Li-ion batteries have started to reach the theoretical maximum energy. Next-generation batteries represent the future of portable energy sources for vehicle electrification and grid energy storage. Li metal battery is one of the most promising next-generation battery technologies that could potentially double the cell-level energy of conventional Li-ion batteries. However, Li metal has multiple drawbacks that require addressing before realization. These drawbacks include dendrite formation leading to internal short and increasing internal resistance due to the breakdown of electrolyte, leading to rapid cell death. These problems stem from the interfacial reactions occurring during the plating and stripping of Li metal. The plating of Li metal is impacted by the mass transport of ions within the electrolyte and surface conditions of the substrate it is plating on. The research presented here strives to understand the interfacial reactions due to the atomistic nature of the substrate, both in crystal type and facet selection, and the surface compounds present on the substrates with regards to surface oxides and other conversion materials. W was found to show a promising performance when compared to Cu. The SEI on W showed a more robust composition with an increase in inorganic component production. The crystal face present during plating causes the plated Li to match the crystal face; however, as the thickness of the plated Li increases, the crystal structure becomes anisotropic and starts to become unimodal. The unimodal texture showed that Li plates in the basis-oriented reproductive type (BR), with the zeta-fiber being the preferred texture. The surface compounds present were explored initially with WO3, as the oxygen content is controllable, and the WO3 undergoes multiple transformations. A first of its kind application of WO3 was found to impact the Li plating and stripping by changing the solid electrolyte interface (SEI) properties through participation in the electrochemical reactions. The presence of W, derived from WO3, within the SEI, creates a framework that helps to regenerate "dead" Li. Additionally, the modified SEI changes the nature of Li nucleation and helps to form a denser inorganic layer by catalytically increasing the decomposition of the electrolyte. New insights have been provided intailoring SEI properties formed on Li metal surfaces to inspire revolutionary ideas to address the grand challenges of rechargeable Li metal batteries.

ISBN: 9798662577374Subjects--Topical Terms:

3173556
Inorganic chemistry.
Subjects--Index Terms:

Batteries

Understanding the Interfacial Reactions Initiating on Lithium Metal Surfaces in Next-Generation Battery Technologies.
LDR:03665nmm a2200361 4500 001 2276930
005 20210510092442.5
008 220723s2020 ||||||||||||||||| ||eng d
020 $a 9798662577374
035 $a (MiAaPQ)AAI28029205
035 $a AAI28029205
040 $a MiAaPQ $c MiAaPQ
100 1 $a Lochala, Joshua A. $3 3555230
245 1 0 $a Understanding the Interfacial Reactions Initiating on Lithium Metal Surfaces in Next-Generation Battery Technologies.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2020
300 $a 121 p.
500 $a Source: Dissertations Abstracts International, Volume: 82-03, Section: B.
500 $a Advisor: Xiao, Jie.
502 $a Thesis (Ph.D.)--University of Arkansas, 2020.
506 $a This item must not be sold to any third party vendors.
520 $a Li-ion batteries have started to reach the theoretical maximum energy. Next-generation batteries represent the future of portable energy sources for vehicle electrification and grid energy storage. Li metal battery is one of the most promising next-generation battery technologies that could potentially double the cell-level energy of conventional Li-ion batteries. However, Li metal has multiple drawbacks that require addressing before realization. These drawbacks include dendrite formation leading to internal short and increasing internal resistance due to the breakdown of electrolyte, leading to rapid cell death. These problems stem from the interfacial reactions occurring during the plating and stripping of Li metal. The plating of Li metal is impacted by the mass transport of ions within the electrolyte and surface conditions of the substrate it is plating on. The research presented here strives to understand the interfacial reactions due to the atomistic nature of the substrate, both in crystal type and facet selection, and the surface compounds present on the substrates with regards to surface oxides and other conversion materials. W was found to show a promising performance when compared to Cu. The SEI on W showed a more robust composition with an increase in inorganic component production. The crystal face present during plating causes the plated Li to match the crystal face; however, as the thickness of the plated Li increases, the crystal structure becomes anisotropic and starts to become unimodal. The unimodal texture showed that Li plates in the basis-oriented reproductive type (BR), with the zeta-fiber being the preferred texture. The surface compounds present were explored initially with WO3, as the oxygen content is controllable, and the WO3 undergoes multiple transformations. A first of its kind application of WO3 was found to impact the Li plating and stripping by changing the solid electrolyte interface (SEI) properties through participation in the electrochemical reactions. The presence of W, derived from WO3, within the SEI, creates a framework that helps to regenerate "dead" Li. Additionally, the modified SEI changes the nature of Li nucleation and helps to form a denser inorganic layer by catalytically increasing the decomposition of the electrolyte. New insights have been provided intailoring SEI properties formed on Li metal surfaces to inspire revolutionary ideas to address the grand challenges of rechargeable Li metal batteries.
590 $a School code: 0011.
650 4 $a Inorganic chemistry. $3 3173556
650 4 $a Electrical engineering. $3 649834
650 4 $a Chemical engineering. $3 560457
653 $a Batteries
653 $a Lithium Metal
653 $a Solid Electrolyte Interface
653 $a Tungsten Trioxide
690 $a 0488
690 $a 0544
690 $a 0542
710 2 $a University of Arkansas. $b Chemistry. $3 3279451
773 0 $t Dissertations Abstracts International $g 82-03B.
790 $a 0011
791 $a Ph.D.
792 $a 2020
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28029205