東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Structural Identification and Damage...

Naik, Manan.

FindBook

Google Book

Amazon

博客來

Structural Identification and Damage Detection in Bridges Using Wave Method and Uniform Shear Beam Models: Application to a Shake-Table Tested Bridge.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Structural Identification and Damage Detection in Bridges Using Wave Method and Uniform Shear Beam Models: Application to a Shake-Table Tested Bridge./
作者:	Naik, Manan.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2020,
面頁冊數:	120 p.
附註:	Source: Masters Abstracts International, Volume: 82-06.
Contained By:	Masters Abstracts International82-06.
標題:	Civil engineering. -
電子資源:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28029897
ISBN:	9798557010337

Structural Identification and Damage Detection in Bridges Using Wave Method and Uniform Shear Beam Models: Application to a Shake-Table Tested Bridge.
Naik, Manan.

Structural Identification and Damage Detection in Bridges Using Wave Method and Uniform Shear Beam Models: Application to a Shake-Table Tested Bridge. - Ann Arbor : ProQuest Dissertations & Theses, 2020 - 120 p.

Source: Masters Abstracts International, Volume: 82-06.

Thesis (M.S.)--California State University, Long Beach, 2020.

This item must not be sold to any third party vendors.

This thesis will present a wave method to be used for the identification of the structural system and damage detection of structural components in bridges. This method was shown to be strong when applied to real structures and large amplitude response in buildings (e.g., mid-rise and high-rise buildings). This study is the first application of the method to bridge structures. The bridge identification was performed using wave propagation in a simple uniform shear beam model. The method identifies a wave velocity for the structure by fitting an equivalent uniform shear beam model in impulse response functions of the recorded earthquake response. The structural damage is detected by detecting changes in the identified velocities from one damaging event to another. The method uses response of the acceleration recorded in the structure. In this study, the acceleration response from a shake-table 4-span bridge tested to failure was used. As the information was available on the shake-table test data, it provided us an opportunity to check the accuracy of our uniform shear beam model's identification results. It also revealed the strength and limitation of the shear beam model for damage detection in bridges. The prototype bridge was instrumented using nine triaxial accelerometers at the deck level and three triaxial accelerometers at the base of its columns (i.e., shake-tables). A uniform shear beam model can be identified using data from two channels (source and receiver). Unlike building structures which typically comprise sensors placed on their floors (along their height), the sensor placement on a bridge comprises a two-dimensional distribution (along the height and length of the bridge). Therefore, two scenarios for wave propagation in the bridge were proposed. In each scenario, pairs of sensors were identified to represent a specific wave passage in the bridge. Identified wave velocities for each scenario and for various shaking intensities were reported. A summary of actual observed damages in the structure was prepared. The observed damages were then grouped into five damage states. Further, damage states were compared with the detected reductions in the identified velocities. The results show that: 1) The identified shear wave velocities presented a decreasing trend as the shaking intensity was increased, 2) the reduction percentage in the velocities was consistent with the overall observed damage in the bridge, 3) there was no clear correlation between a specific wave-passage and the observed reduction in the velocities. This indicates that the uniform shear beam model was too simple to localize the damage in the bridge. It rather provides a proxy on the extent of complete change in the response due to damage. While the shear beam model provided a unique opportunity for extending the wave method application to the bridge structure, it revealed that a more detailed model will be required to take into account the bending nature of bridge response and the significant wave dispersion associated with it. Further study will be needed for developing and calibrating a more detailed model for the purpose of a robust damage detection and damage localization in bridges.

ISBN: 9798557010337Subjects--Topical Terms:

860360
Civil engineering.
Subjects--Index Terms:

Damage detection

Structural Identification and Damage Detection in Bridges Using Wave Method and Uniform Shear Beam Models: Application to a Shake-Table Tested Bridge.
LDR:04562nmm a2200409 4500 001 2276727
005 20210510091858.5
008 220723s2020 ||||||||||||||||| ||eng d
020 $a 9798557010337
035 $a (MiAaPQ)AAI28029897
035 $a AAI28029897
040 $a MiAaPQ $c MiAaPQ
100 1 $a Naik, Manan. $3 3555020
245 1 0 $a Structural Identification and Damage Detection in Bridges Using Wave Method and Uniform Shear Beam Models: Application to a Shake-Table Tested Bridge.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2020
300 $a 120 p.
500 $a Source: Masters Abstracts International, Volume: 82-06.
500 $a Advisor: Rahmani, Mehran.
502 $a Thesis (M.S.)--California State University, Long Beach, 2020.
506 $a This item must not be sold to any third party vendors.
520 $a This thesis will present a wave method to be used for the identification of the structural system and damage detection of structural components in bridges. This method was shown to be strong when applied to real structures and large amplitude response in buildings (e.g., mid-rise and high-rise buildings). This study is the first application of the method to bridge structures. The bridge identification was performed using wave propagation in a simple uniform shear beam model. The method identifies a wave velocity for the structure by fitting an equivalent uniform shear beam model in impulse response functions of the recorded earthquake response. The structural damage is detected by detecting changes in the identified velocities from one damaging event to another. The method uses response of the acceleration recorded in the structure. In this study, the acceleration response from a shake-table 4-span bridge tested to failure was used. As the information was available on the shake-table test data, it provided us an opportunity to check the accuracy of our uniform shear beam model's identification results. It also revealed the strength and limitation of the shear beam model for damage detection in bridges. The prototype bridge was instrumented using nine triaxial accelerometers at the deck level and three triaxial accelerometers at the base of its columns (i.e., shake-tables). A uniform shear beam model can be identified using data from two channels (source and receiver). Unlike building structures which typically comprise sensors placed on their floors (along their height), the sensor placement on a bridge comprises a two-dimensional distribution (along the height and length of the bridge). Therefore, two scenarios for wave propagation in the bridge were proposed. In each scenario, pairs of sensors were identified to represent a specific wave passage in the bridge. Identified wave velocities for each scenario and for various shaking intensities were reported. A summary of actual observed damages in the structure was prepared. The observed damages were then grouped into five damage states. Further, damage states were compared with the detected reductions in the identified velocities. The results show that: 1) The identified shear wave velocities presented a decreasing trend as the shaking intensity was increased, 2) the reduction percentage in the velocities was consistent with the overall observed damage in the bridge, 3) there was no clear correlation between a specific wave-passage and the observed reduction in the velocities. This indicates that the uniform shear beam model was too simple to localize the damage in the bridge. It rather provides a proxy on the extent of complete change in the response due to damage. While the shear beam model provided a unique opportunity for extending the wave method application to the bridge structure, it revealed that a more detailed model will be required to take into account the bending nature of bridge response and the significant wave dispersion associated with it. Further study will be needed for developing and calibrating a more detailed model for the purpose of a robust damage detection and damage localization in bridges.
590 $a School code: 6080.
650 4 $a Civil engineering. $3 860360
650 4 $a Industrial engineering. $3 526216
650 4 $a Materials science. $3 543314
650 4 $a Architectural engineering. $3 3174102
650 4 $a Public administration. $3 531287
653 $a Damage detection
653 $a Structural components in bridges
653 $a High-rise building construction
653 $a Shear beam
653 $a Earthquake response
653 $a Damage localization
690 $a 0543
690 $a 0794
690 $a 0546
690 $a 0617
690 $a 0462
710 2 $a California State University, Long Beach. $b Civil Engineering & Construction Engineering Management. $3 3555021
773 0 $t Masters Abstracts International $g 82-06.
790 $a 6080
791 $a M.S.
792 $a 2020
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28029897